Accessories 2008/09 - Hama

SAT Technology
… | PLUGS & MOUNTING | SOCKETS | COMPONENT PARTS | MULTI-SWITCHES | LNBS | DISHES | BRACKETS | INSTALLATION AIDS |
Installation Aids
Every trained DIYer can assembly a
satellite system without much fuss.
DIY assembly will be a success with
appropriate installation accessories for
adjusting and controlling. This also
applies to laying of cables and to the
assembly of plugs. In case of
disturbances, a quick fault diagnosis (by
means of exclusion procedure) will be
a success as well .
047454
047458
Qty
6
Qty
6
BC
42
BC
42
SAT Levelmeter
- For precise adjustment and testing of
SAT installations
- Controller for sensitivity included
- 2x F-connectors (sockets)
- Analogue display
- Control sound for SAT level
- Colour: black
Compass
- Robust compass with plastic housing for
satellite position fixing
- International 64/360° scale, white on
black
- Rotatable marking
- Sighting device with finder
- Display diameter 45mm
- Noctilucent display
- Collapsible
- Colour: black
SAT TECHNOLOGY INSTALLATION AIDS
Screw Kit with Pegs
Set contains:
- 4 screws Ø 8 x 80 mm (DIN 571)
- 4 washers Ø 8 mm (DIN 9021)
- 4 plastic pegs Ø 12 mm for solid
material (concrete, solid brick)
044189
Qty
6
BC
42
Heavy-Duty Dowel Kit made of
metal, 10 x 50 mm
- 4 screws: ø7.8 x 70 mm (width A/F: 13)
- 4 shims: outside diameter: 15.7 mm,
inside diameter: 8.5 mm
- 4 heavy-duty dowels 10 x 50 mm
- Suitable for non-cracked concrete and
natural stone with dense structure
044254
Qty
6
BC
42
Cable Clip
- For secure fastening of SAT/antenna
cables without any problems
25 pieces
044249
Qty
6
BC
43
- For SAT/antenna cables up to a diameter
of 7.2 mm
- With nail; length: 25 mm
- Colour: grey
BC = blister size
BC X = blister (special size)
HT = hangtag
CB = packed in cardboard box
PO = polybag
BA = banderol
September 2008
135