Accessories 2008/09 - Hama

SAT Technology
… | PLUGS & MOUNTING | SOCKETS | COMPONENT PARTS | MULTI-SWITCHES | LNBS | DISHES | BRACKETS | INSTALLATION AIDS |
LNBs
The LNB (Low Noise Block Converter)
amplifies the picked up signals and
reduces the frequency to intermediate
frequency (IF). This is necessary so that
the received signal can be transmitted
to the satellite receiver via a coaxial
cable without much loss. The number
of TVs determines if a single, twin,
quad or okto LNB is to be used.
Colour: blue
047493
Qty
6
BC
35
“Lypsi“ LNBs
- For analogue and digital reception of
satellite programs, e.g. Astra, Eutelsat
- Protective housing weatherproof casing
included
- Feed Ø: 40mm
- 5 year function guarantee
Technical details:
- 14/18 V vertical/horizontal change-over
- 22KHz change-over low/high band
- Input frequency: 10.7 - 12.75 GHz
- Oscillator frequency: L1: 9.75 GHz/L2:
10.6 GHz
- Output frequency: 950 - 2050 MHz/
1100 - 2150 MHz
- Noise factor: 0.3 dB (min)
“UNI 1“ Single-LNB
- For connecting analogue or digital
receivers
- Amplification: 55dB (typ.)
- Power consumption 110 mA (typ.)
SAT TECHNOLOGY LNBS
047495
Qty
16
BC
38
“U1” Twin LNB
- For connecting two analogue or digital
receivers
- Amplification:55dB (typ.)
- Power consumption : 170 mA (typ.)
047496
Qty
16
BC
38
“Q1” Quad LNB
- For connecting several analogue and
digital receivers in connection with
Hama multi switches 4/4, 5/4, 5/8, 9/4, 9/8
- Amplification: 55 dB(typ.)
- Power consumption: 170 mA (typ.)
047497
Qty
16
BC
38
“QS1” Quad Switch LNB
- With integrated multi switch for 4 users
- Amplification 55 dB (typ.)
- Power consumption: 190 mA
BC = blister size
BC X = blister (special size)
HT = hangtag
CB = packed in cardboard box
PO = polybag
BA = banderol
September 2008
123