HAHN+KOLB-Toolcatalog 2011/12 – Metal Cutting Tools

Continued next page
Carbide drill hammer bits SDS-plus
Execution:
•4 grooves, which increases feed volume and reduces power consumption by 25 % due to less friction on
walls compared to conventional SDS-plus drills. Result is longer service life.
•patented SDS-plus, new developed S4+ with centring tip, convincing by heat resistance and low wear.
Penetrates hardest concrete quickly and without any problems and is robust if hitting reinforcements.
Application: for concrete, brick work, natural stone. For impact hammers with SDS-plus attachment and
2-groove attachment Hilti TE 10-22.
Minimum order qty.: Up to Ø 8 mm = 5 pieces
Drilling tools
Masonry drill bits
Ø d1 I2 I1 11190 Ø d1 I2 I1 11190 Ø d1 I2 I1 11190
mm mm mm Ident. No. U. pr. E mm mm mm Ident. No. U. pr. E mm mm mm Ident. No. U. pr. E
4 100 160 041 O. R.
200 260 103 O. R.
250 310 160 O. R.
50 110 050 O. R.
10
400 460 104 O. R. 400 460 161 O. R.
5
100 160 051 O. R.
100 160 120 O. R. 16 550 610 162 O. R.
50 110 061 O. R. 150 210 121 O. R. 750 800 163 O. R.
100 160 062 O. R. 200 260 122 O. R. 950 1000 166 O. R.
6
150 210 063 O. R.
12
400 460 123 O. R.
150 200 180 O. R.
200 260 064 O. R. 550 610 124 O. R.
18
400 450 181 O. R.
7 50 110 071 O. R. 950 1000 126 O. R.
150 200 200 O. R.
50 110 080 O. R.
100 160 140 O. R.
20
400 450 201 O. R.
8
10
100 160 081 O. R. 200 260 141 O. R.
200 250 220 O. R.
150 210 082 O. R.
14
250 310 142 O. R.
22
400 450 221 O. R.
200 260 083 O. R. 550 610 143 O. R. 24 200 250 240 O. R.
50 110 100 O. R.
100 160 150 O. R.
200 250 250 O. R.
100 160 101 O. R.
15
200 260 151 O. R.
25
400 450 251 O. R.
150 210 102 O. R. 16 100 160 159 O. R. 26 400 450 261 O. R.
d1
l2
l1
RH cut
Metal-cutting tools
Prod. Gr. 113
Continued next page
Carbide hammer drill bit sets SDS-plus
in metal box
Execution:
•4 grooves, which increases feed volume and reduces power consumption by 25 % due to less friction on
walls compared to conventional SDS-plus drills. Result is longer service life.
•patented SDS-plus, new developed S4+ with centring tip, convincing by heat resistance and low wear.
Penetrates hardest concrete quickly and without any problems and is robust if hitting reinforcements.
Application: for concrete, brick work, natural stone. For impact hammers with SDS-plus attachment and
2-groove attachment Hilti TE 10-22.
Fitted with: carbide hammer drill bit SDS-plus No. 11190.
Dimensions mm Ø x working length
Tip each 1 x
5x50 / 6 x 50 / 6 x 100 / 8 x 50 / 8 x 100 / 10 x100 / 12 x100
11191 in metal box Ident. No. 015
Set price E O. R.
Dimensions mm Ø x working length
Tip each 1 x 5x100 / 6 x 100 / 8 x 100 / 10 x100 / 12 x100 / 6 x 150 / 8 x 150 /
10 x150 / 12 x150 / 14 x 150 / 8 x 200 / 10 x 200 / 12 x 200 / 14 x 200
11191 in metal box Ident. No. 030
Set price E O. R.
Prod. Gr. 113
Ident. No. 030
RH cut
2011/12
93