HAHN+KOLB-Toolcatalog 2011/12 – Metal Cutting Tools

Continued next page
Circular cutters
Drilling tools
Circular cutters
Application: for processing different materials with different types of cutters and cutter holders. The standard version is supplied with drawing cut blade for
steel and non-ferrous metal processing up to 5 mm thickness.
Circular cutter types:
Metal-cutting tools
Liliput Type 00 Type 00 a
HSSE HSSE-TiN Carbide
Blade shapes and their areas of application:
Shape 122 for Liliput Pull cut Shape 2 for Liliput Shape 3 for Liliput Shape 5 for type 00 and 00 a
With pull cut for sheet, steel and non-ferrous metal
processing up to 5 mm cutting depth.
Available in: HSSE, HSSE-TiN, carbide
For soft plastic, sealing material,
rubber, leather etc. up to 5 mm cutting
depth from 1 side, cut on both sides up
to 10 mm material thickness.
Available in: HSSE
For synthetics such as hard PVC,
Plexiglas, polyamide etc. up to cutting
depth 15 mm of 1 side = 30 mm max.
material thickness cut from both sides.
Available: HSSE, HSSE-TiN, carbide
For soft plastic, sealing material, rubber,
leather etc. up to 5 mm cutting depth from
1 side, cut on both sides up to 10 mm material
thickness.
Available in: HSSE
Shape 422 for type 00 and 00 a Pull cut Shape 6 for type 00 and 00 a Shape 7 for type 00 and 00 a Shape 8 for type 00 a
With pull cut for sheet, steel and non-ferrous metal For synthetics such as hard PVC, Plexiglas,
polyamide etc. up to cutting PVC, pressed materials etc. which
For cutting out synthetics such as rigid
processing up to 5 mm cutting depth.
Available in: HSSE, HSSE-TiN, carbide
depth 15 mm of 1 side = 30 mm max. severely stress the cutter. The blade is
Type
material thickness cut from both sides.
Available: HSSE, HSSE-TiN
Type Liliput
complete with cutter form 122
HSSE
reinforced and therefore very solid.
Cutting depth from one side up to
22 mm.
Available only with carbide cutter.
Type 00
complete with cutter form 422 HSSE
For thicker plates up to approx. 12 mm and
up to 150 mm Ø. Also suitable as counter
blades and re-cutting blades, and for larger
diameters and thicker materials.
Available in: HSSE, HSSE-TiN, carbide
Type 00 a
complete with cutter form 422 HSSE
for Ø range mm 18-80 30-200 30-400
Shank Straight shank Ø 10 mm Straight shank Ø 12 mm – – – – –
11350 Circular cutters Ident. No. 011 121 – – – – –
Unit price E O. R. O. R. – – – – –
Shank – – – Morse taper 2 – – – – –
11350 Circular cutters Ident. No. – – – 131 – – – – –
Unit price E – – – O. R. – – – – –
Shank – – – Morse taper 3 Morse taper 3
11350 Circular cutters Ident. No. – – – 141 241
Unit price E – – – O. R. O. R.
For Form – – – 5 and 6 422 7 5 and 6 422 7 8
11358 Holder for cutter Ident. No. – – – 100 110 120 200 210 220 230
Unit price E – – – (O. R.) (O. R.) (O. R.) (O. R.) (O. R.) (O. R.) (O. R.)
Shape 122 2 3 5 6 422 – 5 6 422 – 8
11370 Cutter HSSE Ident. No. 011 020 030 150 160 141 – 150 160 141 – 280
Unit price E O. R. O. R. O. R. O. R. O. R. O. R. – O. R. O. R. O. R. – O. R.
Shape 122 – 3 – 6 422 – – 6 422 – 8
11371 Cutter HSSE-TiN Ident. No. 011 – 030 – 160 141 – – 160 141 – 280
Unit price E O. R. – (O. R.) – (O. R.) O. R. – – (O. R.) O. R. – (O. R.)
Shape 122 – 3 – 6 422 7 – 6 422 7 8
11373 Cutter carbide Ident. No. 011 – 030 – 160 141 170 – 160 141 170 280
Unit price E O. R. – O. R. – (O. R.) O. R. O. R. – (O. R.) O. R. O. R. O. R.
Prod. Gr. 119
2011/12
91