HAHN+KOLB-Toolcatalog 2011/12 – Metal Cutting Tools

Continued next page
Filling level indication
Can be used for commercial 60 and 210 litre drums.
Suited for non-corrosive fluids such as coolant concentrates, emulsions, oils, anti-freezing agents, heating
fuel etc. and other fluids. Ideally suited for more transparency when handling drums. The float lies on the
fluid in the drum and permanently shows the drum contents on the volume scale. Since the filling level indication
is installed on the 3 /4"-opening, a pump can be simultaneously placed onto the 2"-bung opening in
order to extract the define quantity.
Drum volume l 60 to 210
Air line to the body M 40
Voltage V/Hz 7-11
18300 Filling level indication Ident. No. 175
Unit price E O. R.
Prod. Gr. 147
Coolants and lubricants
Accessories and care
Metal-cutting tools
Continued next page
Drum key
Application: secure opening of commercial drums.
18300 Drum key Ident. No. 180
Unit price E O. R.
Prod. Gr. 147
Continued next page
Oil belt skimmer Rapid 2.1
High requirements are put on cooling lubricants with regard to lifetime, industrial hygiene and disposal.
Tramp oil and floating contaminants stop the supply of oxygen, the fluid dies. This will provide ideal
breading grounds for bacteria, fungi and yeasts.
The fluid has to be replaced and disposed of.
Advantages:
•very compact device
•oil discharge possible in two directions
•large 3 /4" oil-sludge discharge
•higher capacity thanks to belt stripping on both sides
Model Rapid 2.1
Discharge capacity l/hour 3-12
Blade width mm 60
Belt length mm 600
Penetration depth mm 185
Temperature max. °C 40
Working area PH 7-11
Voltage V/Hz 230/50
18300 Oil belt skimmer (without belt) Ident. No. 190
Unit price E (O. R.)
18300 Belt for oil skimmer 60x600 mm
Ident. No. 195
immersion depth 185 mm
Unit price E (O. R.)
RAPID 2.1
A
50 mm 10 mm
Prod. Gr. 186
2011/12
477