HAHN+KOLB-Toolcatalog 2011/12 – Metal Cutting Tools

Continued next page
Maxiflex ® segmented hoses
magnetic legs, distributor block
Execution: with interchangeable individual plastic segments connected to hose Length and position
variable according to need.
•coolant supplied precisely where needed
•hold shape, no wandering under pressure or vibration
•chemically resistant, electrically non-conductor
•suitable for high coolant pressure in CNC machines
•universal snap-on system with various nozzles, branch pieces and screw fittings
Ident. No. 010 magnetic base R 1 /4" version, 6.35 mm orifice. With ball valve, nozzle LW13 and
locking screw R 3 /8. Outlet can be set either vertical or horizontal, complete with hose,
nipple R 3 /8", reducer 12/6 mm, 22 segments, nozzle Ø 3.2 mm
Ident. No. 020 magnetic base R 1 /2" version, 12.7 mm orifice. With ball valve, nozzle LW13 and
locking screw R 3 /8. Outlet can be set either vertical or horizontal, complete with hose,
nipple R 3 /8", 12 segments, nozzle Ø 10 mm
Ident. No. 030 magnetic base R 1 /4" version, 6.35 mm orifice. With ball valve, nozzle LW10 and
locking screw R 1 /4". Outlet can be set either vertical or horizontal, complete with hose,
nipple R 1 /4", 22 segments, nozzle Ø 3.2 mm
Ident. No. 040 magnetic base R 1 /4" version, 6.35 mm orifice, with nozzle LW10, but without ball valve
and sealing plug, 1 each R 1 /4" vertical and horizontal outputs, complete with 2 hoses.
2 nipples each R 1 /4", 22 segments, nozzle Ø 3.2 mm (2x)
Ident. No. 100 distributor block R 1 /4"version, 6.35 -mm orifice. With adhesive magnet. Outlets vertical
with 3 ball valves, LW13 nozzles. Design with 3 outlets R 1 /4" for magnetic foot, Ident.
No. 010
Designation magnetic foot Distributor block
Version R 1 / 4" R 1 / 4" R 1 / 4" R 1 / 2" R 1 / 4"
Passage Ø mm 6,35 6,35 6,35 12,7 6,35
56501 Ident. No. 040 030 010 020 100
Unit price E O. R. O. R. O. R. O. R. O. R.
Prod. Gr. 575
Coolants and lubricants
Accessories and care
Ident. No. 010 and 020 Ident. No. 030
Ident. No. 040
Metal-cutting tools
Ident. No. 100
Continued next page
Coolant equipment
For coolant equipment with pump please refer to page page 1363.
Design: coolant equipment with pump, coolant hose and tank for any types of tool machines.
Advantages:
•conveyed volume of 16 - 50 l/min
•tank capacity of 15 - 50 litres
For coolant hoses made in steel please refer to page page 1363.
Design: self-sealing, nickel-plated coolant hoses made of steel. Hold shape under pressure in any position.
Advantages:
•for oils and lubricants
•self-sealing and with kink protection
No. 56490 No. 56491
Continued next page
Hand-held refractometer
Easy and exact check of coolants, cutting coolants and lubricants to ensure optimum concentration of the
liquid.
This results in: better utilisation of machine tools, higher life expectancy of tools, avoid corrosion through
low emulsion.
Measuring range 0-32 %, graduation 0.2 %
Delivery: in a case with operating manual
Measuring range 0-32 % 0-15 %
41580 Hand-held refractometer Ident. No. 010 020
Unit price E O. R. O. R.
41580 Spare flap Ident. No. 040 050
Unit price E O. R. O. R.
h Emulsion care case for the chemical testing of the coolants, cutting coolants and lubricants (test on
nitrite and nitrate contents, ph value, water hardness) No. 18300 160-169 see page 476.
Prod. Gr. 454
31
32
30
29
27
28
26
25
23
24
21
22
20
19
18
17
16
15
13
14
11
12
10
9
7
8
5
6
3
4
2
1
0
Brix%20C
2011/12
475