HAHN+KOLB-Toolcatalog 2011/12 – Metal Cutting Tools

Continued next page
A-CUT cutting inserts AIPV
for AH 101, AHR/L 201, AHR/L 211 and AHR/L 619
Execution: shape V
Application: ideal for the processing of precision recessions, free turning and for sectional work (width
tolerance 0.02 mm). Available with available edge radii. The V-shape has a multi-directional chip breaker.
(E-design * + Seegerring**).
Box qty.: 10 pieces
Surface
coated
Carbide types HC 3635
Application
steel, VA,
cast
Material group
Designation
Sizes
W
(± 0,02)
R 17666
AIPV mm mm Ident. No. U. pr. E
3,00E 0,40 3,00
202 O. R.
4,00E 0,40 4,00 0,40
207 O. R.
6,00E 0,40 6,00 217 O. R.
3,00E 1,50 3,00 1,50 222 O. R.
4,00E 2,00 4,00 2,00 227 O. R.
6,00E 3,00 6,00 3,00 237 O. R.
1,85 0,10 1,85 0,10 302 O. R.
2,00 0,20 2,00 0,20 307 O. R.
2,15 0,15 2,15 0,15 312 O. R.
2,65 0,15 2,65 0,15 317 O. R.
3,00 0,20 3,00 0,20 322 O. R.
4,00 0,20 4,00 0,20 327 O. R.
4,15 0,15 4,15 0,15 332 O. R.
Lathe tools
A-CUT grooving and cut-off tools
R
R = 0.5 x W
for cutting inserts with full radius
W
R
Metal-cutting tools
* Cutting inserts, E version, rounded.
** Seeger circlip ring cutting inserts Ident. No. 302-332.
Prod. Gr. 181
Continued next page
A-CUT cutting inserts AIMF
for AH 106
Execution: shape F
Application: especially for axial and frontal recessing. The cutting edge height for smaller diameters was
designed centred, in order to make it possible to extend the grooves by means of a series of overlapping
recessions. (Insert are not interchangeable with AIMC, AIMJ or AIPV inserts), after the first recession, the
recession width can be increased in both directions.
Box qty.: 10 pieces
Surface
coated
Carbide types HC 3630
Application
steel, VA,
cast
Material group
Designation
Sizes
W Version R Ø D
(± 0,1)
(range)
17666
AIMF mm mm mm Ident. No. U. pr. E
2N 2,1 Neutral 0,20 from 35 410 O. R.
3N 3,0 Neutral 0,30 from 54 420 O. R.
4N 4,0 Neutral 0,25 from 35 430 O. R.
5N 5,0 Neutral 0,25 From 40 440 O. R.
6N 6,0 Neutral 0,25 from 44 450 O. R.
R
W
7°
N
Prod. Gr. 181
Continued next page
Lathe cutting tool set
for external and internal grooves (right)
Application: for groove widths 1.1/1.3/1.6/1.85/2.15 mm
Set consisting of:
•1 clamping holder with shank 16 x 16 mm, right side
•1 boring bar Ø 16 mm, right, for holes from Ø 17.8 mm
•5 x 2 indexable inserts, 2-edge blade, HM-type K10/20, TiN coated
•1 Torx screwdrivers
17670 Set Ident. No. 001
Set price E O. R.
Prod. Gr. 119
2011/12
375