HAHN+KOLB-Toolcatalog 2011/12 – Metal Cutting Tools

Metal-cutting tools
Lathe tools
A-CUT grooving and cut-off tools
Continued next page
A-Cut blade system
Application: the A-cut grooving system has been designed for the following machining tasks: Cutting off
and recessing, copy turning and groove milling. The versatile range of tool inserts with specifically developed
chip breaker geometries ensure process reliability for a large application spectrum.
Advantages:
•high-precision clamping between the holder and the indexable insert for process reliability
•large application spectrum due to innovative cutter geometry
•indexable inserts can also be mounted to disk milling cutters.
Continued next page
A-CUT blade carriers AH 101
Application: cutting off and deep recessing. For cutting inserts AIMC, AIMJ and AIPV. Cutting inserts are not suited for turning or copy turning operations.
Scope of delivery: with ejector, without cutting inserts
7°
W
B
H
D max
L
A
150°
Designation Cutting insert width Sizes Max. workpiece Ø Suitable clamping shafts
W A H B L 17665
AH 101 mm mm mm mm mm D max Ident. No. U. pr. E
19 1,6 1,6 1,2*
32
010 O. R.
ATBR 19-2
15,7 19 86
19 2,2 2,2 1,6 38 ATBN 16-2
015 O. R.
26 1,6 1,6 1,2*
26 2,2 2,2 1,6 50 025 O. R.
ATBR 25-6
21,4 26 110
26 3,1 3,1 2,4 75 ATBN 16-5/19-5/20-5 030 O. R.
35
020 O. R.
26 4,1 4,1 3,2 80 035 O. R.
32 2,2 2,2 1,6**
32 4,1 4,1 3,2 24,8 32 150
100 ATBN 20-6/25-6/32-6 050 O. R.
50
040 O. R.
32 3,1 3,1 2,4 100 045 O. R.
32 5,1 5,1 4 125 055 O. R.
32 6,4 6,4 5,2 125 060 O. R.
* A = 1.2 mm only in the range of the cutting depth. The total thickness is 1.6 mm.
* A = 1.6 mm only in the range of the cutting depth. The total thickness is 2.4 mm.
Prod. Gr. 181
370 2011/12