HAHN+KOLB-Toolcatalog 2011/12 – Metal Cutting Tools

Metal-cutting tools
Milling tools
Solid carbide end mills
Continued next page
Possible applications: solid carbide chamfering cutter
V slot milling Countersinking Angle cutting Face milling Combined face and angle cutting Spot drilling* Drilling*
* Drilling and spot drilling only in cast and nonferrous
metals.
Continued next page
Solid carbide quarter circle concave milling cutters
Typ
N
Z
2
Execution: straight shank in conformity with DIN 6535 HA, straight flutes, micro-fine grain K15.
Application: quarter circle milling cutter for the machining of complex shapes, for small radii on holes from
D=1mm.
With reduced Ø on the radius runoff so it can be used even under cramped working conditions.
Radius R ± 0.02 mm 0,25 0,30 0,40 0,50 0,60 0,70 0,80 0,90
Ø d1 ±0.01 mm 0,5 0,5 0,5 0,5 0,5 0,5 0,8 0,8
d 2 h 6 mm 3 3 3 3 3 3 3 3
d3 mm 1,0 1,2 1,4 1,6 1,8 2,1 2,5 2,9
l mm 2,5 2,5 2,5 2,5 3,0 3,0 4,0 4,0
Length L mm 50 50 50 50 50 50 50 50
16711 Ident. No. 625 630 640 650 660 670 680 690
Unit price E O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R.
HA
d1
L
R d3
d2
d2
Radius R ± 0.02 mm 1,00 1,25 1,50 1,75 2,00 2,25 2,50
Ø d1 ±0.01 mm 0,8 0,8 1,5 1,5 1,5 1,5 1,5
d2 h6 mm 3 5 5 6 6 8 8
d 3 mm 2,9 3,4 4,6 5,6 5,6 6,6 6,6
l mm 4,0 4,0 6,0 6,0 8,0 10,0 10,0
Length L mm 50 50 50 50 50 50 50
16711 Ident. No. 700 725 750 775 800 825 850
Unit price E O. R. O. R. O. R. O. R. O. R. O. R. O. R.
d3
R
10°
d1
80°
0,05
Application Steel (N/mm²) Stainless st. Aluminium Brass Bronze Plastics Graphite/ Gray cast Ti Ni Super