HAHN+KOLB-Toolcatalog 2011/12 – Metal Cutting Tools

Metal-cutting tools
Milling tools
Cutters with indexable inserts
Continued next page
Box qty.: 10 units.
Carbide indexable inserts
for angled cutter No. 16107
Coating Uncoated Coated Uncoated Coated
Carbide types HW4620 HC4410 HW4410 HC4620
Use steel cast, non-ferrous, steel, non-ferrous, VA steel cast
VA
Material group
Indexable inserts Indexable inserts
for milling
s L r d M w Indexable inserts 16109 16109 16109 16109
Designation mm mm mm mm mm Type Ident. No. U. pr. E Ident. No. U. pr. E Ident. No. U. pr. E Ident. No. U. pr. E
TCMT 110202 2,4 11 0,2 6,35 9,322 7° 1 601 O. R. – – 600 O. R. 603 O. R.
TCMT 16T304 3,97 16,5 0,4 9,525 13,891 7° 2 611 O. R. – – 610 O. R. 613 O. R.
SDMW 090308 3,18 9,52 0,8 – 1,64 15° 3 621 O. R. 623 O. R. – – 625 O. R.
SDMT 090308 3,18 9,52 0,8 – 1,64 15° 4 626 O. R. – – 627 O. R. 629 O. R.
SPMW 120408 4,76 12,7 0,8 – 2,299 11° 5 651 O. R. 653 O. R. – – 655 O. R.
SPMT 120408 4,76 12,7 0,8 – 2,299 11° 6 661 O. R. 663 O. R. 660 O. R. 665 O. R.
Prod. Gr. 156
Continued next page
Die and mould making products
The large Kieninger range of die and mould making products is tailored to meet the requirements of users
in the high-performance sector. Continuous further development of the support and indexable insert geometry
ensure high process stability and cost efficiency.
Advantages of the support: Particularly high concentricity due to manufacturing in a clamping device.
Advantages of indexable inserts:
WPR-AF – WBR-AR: twisted tool cutting edge with positive chip breaker for smoother running and reduced
cutting forces, thus less vibrations during milling. Improved viscosity and resistance to wear through direct
pressing, for improved rate of metal removal and extended tool life. The ball profile milling insert with optimised
cutting centre improves the chipping output. The direct air cooling integrated on the tool insert (Air-
Jet) protects the cutter against "breakage at chip impact".
WPB-AF: combines the geometrical advantages of ball inserts and toric inserts and thus improves the surface
quality and extends the tool life. Optimised insert geometry for reduced runtimes. Suitable for use in
the existing mill holder, thus reduced storage. Improved dimensional accuracy and improved process reliability,
no cutting speed in the centre.
WPR-AF
WPR-AR
WPB-AF
288 2011/12