HAHN+KOLB-Toolcatalog 2011/12 – Metal Cutting Tools

Continued next page
Thread-cutting die stock and tap adaptor sets
features in accordance with No. 13535
Delivery:
Size 1:
•adaptor size 1 for thread-cutting die 20 x 7
•packing ring for thread-cutting die 20 x 5
•1 adaptor size 1 each for thread-cutting die 16 x 5 and for tap
•arbour size 1 either with MT 2 or 3
•plastic case
Size 2:
•adaptor size 2 for thread-cutting die 38 x 14
•1 packing ring for each thread-cutting die 38 x 10 and 20 x 5
•1 reducing piece for each thread-cutting die 30 x 11, 25 x 9, 1 and 20 x 7
•arbour size 2 either with MT 2, 3 or 4
•plastic case
•Ident. No. 120-140 with additional holder, Size 2, for taps
Size 3:
•1 adaptor size 3 for each thread-cutting die 45 x 18 and 55 x 22
•1 packing ring for each thread-cutting die 45 x 14 and 55 x 16
•arbour size 3 either with MT 3 or 4
•plastic case
•Ident. No. 170 with additional holder, Size 3, for taps
Size 1* 2 3
For external threads M 1-6 1-6 3-14 3-14 3-14 3-14 16-24
For internal threads M 1-6 1-6 3-16 3-16 3-16 4-24
Arbour MT 2 3 3 2 3 4 3
13541 Ident. No. 060 080 100 120 130 140 170
Set price E O. R. (O. R.) O. R. O. R. O. R. O. R. (O. R.)
* Mandrel without guiding groove (must be held by hand). Prod. Gr. 139
Threading tools
Ratchets and inserts
Metal-cutting tools
Continued next page
Tool holder sets
for taps and thread-cutting dies
Application: for installation on conventional lathes. For supporting internal– and external tap and die tool
with only one tool holder.
Size 2 4
For threads M 3–M 12 M 12–M 24
Max. outside thread length mm 100 110
Power consumption MT 2 MT 3
13544 Ident. No. 010 020
Set price E O. R. O. R.
h On request, size 2 with MT 3; size 4 with MT 4 and also as set for M 14 - M 24 available. The set can
be used same as for MF, UNC, UNF, G or W.
Prices on request.
Prod. Gr. 109
Continued next page
Ratchet sets
in wooden box
Application: for holding taps, thread-cutting dies and hand reamers, with quick-change inserts and extensions,
for cutting internal and external threads even in hard to reach places. Single-handed operation with
easy right/left adjustment.
For threads M 3-M 12 / G 1 /8" + 1 /4" M 12-M 14 / G 1 /4" - G 3 /4"
Reversible ratchet Size 1 2
Support for thread-cutting dies mm 20x5, 20x7, 25x9, 30x11, 38x14 and
extension
38x14, 45x18, 55x22
and extension
Extension for interchangeable inserts MT 2 MT 3
Adjustable inserts for taps size 1= M 3-M 10; size 2= M 5-M 12 size 3= M 12- M 24
13543 Ident. No. 010 020
Set price E O. R. O. R.
Prod. Gr. 109
2011/12
203