HAHN+KOLB-Toolcatalog 2011/12 – Metal Cutting Tools

Metal-cutting tools
Threading tools
Tap extractors
Continued next page
M
Combi tapping bits HSSG
for core hole drilling, thread cutting and burr removal with hexagon drive 6.3 ( 1 /4") in accordance with DIN 3126
1xd
In one operation
•core hole drilling with spiral drilling device
•thread cutting
•thread de-burring
•thread cleaning (during reverse run)
Used in
•stationary drilling machines
•hand drilling machines
•accu drilling machines
pre-requisite: clockwise / anti-clockwise rotation
Application:
•steel and non-ferrous metals up to 1 x d (M6 = 6 mm material thickness)
•up to tensile strength 600 N/mm²
Ident. No. 200 = set consisting of 1 piece each M 3–M 10 in box with adapter
Designation M 3 4 5 6 8 10
Inclination mm 0,5 0,7 0,8 1 1,25 1,5
Overall length mm 36 39 41 44 50 59
Bore Ø mm 2,5 3,3 4,2 5 6,8 8,5
Speed (no. of revolutions) for rpm 1600/1900 1200/1500 950/1200 800/950 600/700 450/550
steel/alu
13407 Single Ident. No. 030 040 050 060 080 100
Unit price E O. R. O. R. O. R. O. R. O. R. O. R.
13407 Set with box Ident. No. 200
Set price E O. R.
Tap drilling – thread cutting – deburring
Ident. No. 030-100
Prod. Gr. 105
Ident. No. 200
Continued next page
WALTON tap extractors
Application: for broken taps.
Execution: with 3 or 4 grooves, single or in sets with preserving boxes. The fingers are inserted by pushing
the retaining ring in the tap groove and secured with the guide bush. The broken piece of the tap is then
loosened with a tap wrench and unscrewed. The tool is extremely stable, the fingers are spring-hard.
No. 13510 for tap with 3 grooves
No. 13512 for tap with 4 grooves
No. 13514 spare finger for tap with 3 grooves
No. 13516 spare finger for tap with 4 grooves
Box qty.: No. 13514 and 13516 = 12 pieces
For metr. tap M 3 4 5 6 8 10 12 16
For Whitw. tap W 1
/ 8 5
/ 32 3
/ 16 1
/ 4 5
/ 16 3
/ 8 1
/ 2 5
/ 8
Ident. No. 030 040 050 060 080 100 120 160
13510 Unit price E O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R.
13512 Unit price E – O. R. O. R. O. R. O. R. O. R. O. R. O. R.
13514 Unit price E O. R. O. R. O. R. O. R. O. R. O. R. O. R. O. R.
13516 Unit price E – O. R. O. R. O. R. O. R. O. R. O. R. –
Prod. Gr. 139
Continued next page
WALTON tap extractor sets
Application: for broken taps.
No. 13518 6-piece set for tap with 3 grooves M 4, 5, 6, 8, 10 and 12,
10-piece set for tap with 3 grooves M 3, 4, 5, 6, 8, 10, 12, 14, 16 and 20
No. 13520 6-piece set for tap with 4 grooves M 4, 5, 6, 8, 10 and 12,
10-piece set for tap with 4 grooves M 4, 5, 6, 8, 10, 12, 14, 16, 20 and 22
With storage box each.
Set. 6-piece
Set. 10-piece
Ident. No. 010 020
13518 Set price E O. R. O. R.
13520 Set price E O. R. O. R.
h Light arc erosion devices on request. Prod. Gr. 139
192 2011/12