HAHN+KOLB-Toolcatalog 2011/12 – Metal Cutting Tools

Metal-cutting tools
Drilling tools
Centre drills
Continued next page
Centre drill sets HSS
in metal box
Execution: shape A, angle of countersinking 60°.
Fitting: each 1x Ø 1.0 / Ø 1.6 / each 2x Ø 2.0 / Ø 2.5 / each 3x Ø 3.15 / 2x Ø 4.0 / 1x Ø 5.0
Version 11001 11002 11004
Ident. No. Set pr. E Set pr. E Set pr. E
HSS 900 O. R. – –
HSSE-TiAlN 900 – O. R. –
HSSE-TiN 900 – – O. R.
i Cut-off tools selection overview from page 20. Prod. Gr. 101
No. 11001 No. 11004
DIN 333
RH cut
Continued next page
Centre drill HSS DIN 333
RH cut
Execution: shape R, angle of countersinking 60°, with radius.
Box qty.: Drill Ø 0.5–2.5 mm = 10 pieces
Sizes
Drill Ø d Body Ø D Overall length L Pilot length l Radius 11010
mm mm mm mm mm Ident. No. U. pr. E
0,5* 3,15 25 2,3–2,6 2 005 O. R.
0,8* 3,15 25 2,6–2,9 2,5 008 O. R.
1,0 3,15 31,5 3,0–3,3 2,9 010 O. R.
1,25 3,15 31,5 3,3–3,6 3,15 012 O. R.
1,6 4 30,3 4,2–4,7 4 016 O. R.
2,0 5 40 5,0–5,4 5 020 O. R.
2,5 6,3 45 6,3–6,8 6,3 025 O. R.
3,15 8 50 8,0–8,5 8 031 O. R.
4,0 10 56 10,0–10,6 10 040 O. R.
5,0 12,5 63 12,5–13,1 12,5 050 O. R.
6,3 16 71 16,0–16,6 16 063 O. R.
Application Steel (N/mm²) Stainless st. Aluminium Brass Bronze Plastics Graphite/ Gray cast Ti Ni Super