HAHN+KOLB-Toolcatalog 2011/12 – Metal Cutting Tools

Continued next page
Continued next page
M-left
MF
Selection overview - taps, M-left, M-fine, pipe threads, trapezoidal threads, etc.
Metr. ISO standard thread,
left-handed
Metr. ISO fine thread
Art. no.
Art. no.
Set of
Machine taps
manual
taps
Through hole
Blind hole
13012 13108
13109
13020 13144 13143 13332 13335
13023 13320 13324
W Withworth thread Art. no. 13040 13334
G
13045 13378
Pipe thread
Art. no.
13046 13207 13379
UNC Unified coarse thread Art. no. 13030 13348
UNF Unified fine thread Art. no. 13035 13358
PG Steel-armoured pipe thread Art. no. 13228
NPT
Americ. standard pipe thread Art. no.
Tr Trapezoidal thread Art. no. 13229
Threading tools
Taps – selection overview
Through hole and
blind hole
13359 13360
13361
Metal-cutting tools
Material
P
M
2.
N
K
4.
S
5.
H
6.
1. Steel materials
1.1 Machining steel
1.2 Construction steel
1.3 Construction steel
1.4 Hardened and tempered steel
1.5 Steel casting
1.6 Case-hardened steel
1.7 Stainless and acid-resistant steel,
ferritic, martensitic
1.8 Hardened and tempered steel
1.9 Nitrided steel, hardened and
tempered
1.10 Tool steel (up to 45 HRC)
Non-rusting steel
2.1 Stainless and acid-resistant
steel, austenitic
3. Non-ferrous metals
3.1 Aluminium alloys, long-chipping
3.2 Aluminium alloys, short-chipping
3.3 Copper alloys (bronze), long-chipping
3.4 Copper alloys (bronze), short-chipping
3.5 Copper alloys (brass), long-chipping
3.6 Copper alloys (brass), short-chipping
3.7 Thermoplastic
3.8 Thermosetting plastics, Bakelite,
Melamine
3.9 Fibre-reinforced synthetics
3.10 Graphite
3.11 Pure metals
3.12 Magnesium alloy
Cast materials
4.1 Alloyed grey cast
4.2 Spheroidal cast
4.3 Malleable iron
Difficult-to-machine materials
5.1 Titanium alloys
5.2 Nickel-based alloys
5.3 Super alloys
Hard materials
6.1 45–65 HRC HSSE-PM
6.2 55–65 HRC VHM
Main application:
Secondary application:
Test
2011/12
139