Waste Bins, Kitchen Cabinet Accessories - Hafele

Organisational Kitchen Fittings 

Waste Bins 

Kitchen waste bin systems 

Single waste bin, capacity 15 litres 

• Carcase width: Min. 400 mm 

• For door mounting: For left and right hand use 

• Installation: Screw fixing to side panel 

Housing: Steel, plastic coated white 

Bin: Light grey plastic 

Lid: White plastic 

Housig: Stainless steel 

Bin: Light grey plastic 

Lid: White plastic 

Cat. No. 

502.12.729 

502.12.023 

Packing: 1 pc. 

Single waste bin, capacity 20 litres 

• Finish: Galvanized bin is fire-retardant 


• For door mounting: For left and right hand use 

• Installation: Screw fixing to side and front panel 

5 

Housing: Stainless steel 

Bin: Steel galvanized 

Lid: Aluminium polished 

Housing: Steel, plastic coated white 

Bin: Dark grey plastic 

Lid: Aluminium polished 

Cat. No. 

502.23.062 

502.23.740 


Double waste bin, capacity 2 x 15 litres 


• Type of pull-out: Full extension (manual) 

• Installation: Screw fixing to bottom 

Double waste bin, capacity 1 x 19 and 1 x 30 litres 

Bracket: Steel plastic coated grey 

Bin and lid: Plastic grey 



• Type of pull-out: Full extension (manual) 

• Installation: Screw fixing to bottom 

Frame: Steel 



Cat. No. 

502.70.252 

Cat. No. 

502.70.522 

We reserve the right to alter specifications without notice (HMA Basic 2011/12). 

HMA 5.36 

New products and systems: www.hafele.com



Accessories for waste bins with hinged doors 

Door opener set 

Spring-rolling element 

• Area of application: To open the door of the waste bin with 

the foot 

• Material: Kick touch plate and spring-rolling element 

plastic, opposite plate steel 

• Finish: Kickplate black, spring-rolling element white, 

opposite plate black lacquered 

• Basement high: Min. 100 mm 

Kick touch plate 

Opposite plate 


Cat. No. 

502.15.033 

Function 

5 

Kick touch plate 

Spring-rolling element, 

closed door 

Spring-rolling element, 

opend door 

Double waste bin, capacity 1 x 15 and 1 x 8 litres 


• Version: Runners for extension base are not included 

• Installation: Screw fixing to extension base 


Bracket: Steel powder coated grey 



Cat. No. 

502.72.761 

Order reference 

Please order GRASS NOVA PRO runners separately. 

New products and systems: www.hafele.com 

HMA 5.37



Triple waste bin, capacity 1 x 22 and 2 x 10 litres 

• Carcase width: 600 mm 

• Type of pull-out: Full extension with soft close device 

• Installation: Screw fixing to side panel with easy fixing device 

• Version: With pull-out cover shelf 

• Supplied with: Fixing material 

For cabinet width 

Cat. No. 

450 mm 2 x 21 litre bins 503.04.514 

600 mm 2x 10 litre and 1 x 22 litre bins 503.04.507 

Packing: 1 set 

Note 

Very easy and fast installation with a template jig. No measurements 

to make for the runner. 

The smart solution for a clean waste disposal: 

Front pull-out system for waste separation available in two different 

heights. 

Application and installation 

5 

The pull-out with damping 

guarantees gentle and soft 

closing. 

As an important requisite 

for hygienic waste disposal, 

the double powdercoated 

metal lid ensures 

long lasting protection 

against damages. 


HMA 5.38 




Stand alone waste bins 

Capacity 35 litres 

• Material: Powder coated steel/ 

Stainless Steel 

• Dimension: 970 x 415 mm 

Finish 

Cat. No. 

Red 502.95.960 

New Silver 502.95.260 

Almond 502.95.460 

Orange 502.95.961 


• Material: Powder coated steel/ Stainless Steel 


Finish 

Cat. No. 

Red 502.95.950 

Stainless Steel 502.95.051 

Orange 502.95.951 

5 




• Material: Powder coated steel/ 

Stainless Steel 


• Material: Powder coated steel/ Stainless Steel 


Finish 

Cat. No. 

Red 502.95.970 

Orange 502.95.971 

Finish 

Cat. No. 

White 502.95.780 


Brown Chocolate 502.95.180 



HMA 5.39


Kitchen Cabinet Accessories 

Wine rack 

• Material: Steel 

• Finish: Silver coloured coated 

• Installation: Screw fixing to panel 

Dim. (W x D x H) Number of levels Number of bottles Cat. No. 

260 x 185 x 490 mm 4 12 541.92.904 

260 x 185 x 624 mm 5 15 541.92.200 


Towel rail with extending runner, 1 or 2 arms 

5 

• Material: With steel runner and plastic cover 

• Finish: Chrome plated rods and cover, galvanized runner 

• Version: Extending 

• Runner length: 260 mm 

• Extension length: 165 mm 

• Fitting: For left and right hand use 

• Installation: 

1-Arm holder for top or lateral screw fixing, 

2-Arm holder for lateral screw fixing 

Length 

Cat. No. 

1 Arm 

325 mm 510.36.214 

410 mm 510.36.223 

2 Arm 

325 mm 510.55.241 

410 mm 510.36.241 

1 Arm 2 Arm 



HMA 5.40 




IRONFIX Ironing board for drawer mounting 

• Fit into a cupboard drawer for optimum space savings 

• Infinitely variable width adjustment for built-in widths 

between 362 and 500 mm 

• Inside cupboard depth 500 mm 

• Integrated spring mechanism 

• Hinging front section permits trousers, shirts to be 

pulled easily over the board 

• Hard-wearing finish – all hardware components made of 

powder-coated metal 

• Automatically extending support for the ironing surface 

when the drawer is opened 

• Operating and assembly instructions are included 

with every ironing board 

• Finish: Steel, powder-coated, white RAL 9016; 

fabric ironing board cover in striped design 

Inside width 362 – 500 mm 


Cat. No. 

568.60.710 

Cupboard inside 

depth 500 mm 

5 

If you require the ironing board to be 

at the same height as the worktop, 

observe the following dimensions: 

Dim. D 20 mm 30 mm 40 mm 50 mm 

Dim. E 86 mm 76 mm 66 mm 56 mm 



HMA 5.41



IRONFIX Ironing board for wall mounting 

Installation 

• Easy to mount on walls 

• Completely assembled 

• Can be folded out for use 

• Equipped with turning mechanism 

• Can be turned steplessly to the left or to the right up to 90° 

• Can be locked in the left, right and inclined position 

• Operating and assembly instructions are included with every 

ironing board 

• Finish: Steel, powder-coated, white RAL 9016; fabric ironing board 

cover in striped design 

Cover hood 

Version 

Cat. No. 

Without cover hood 568.66.700 

With cover hood 568.66.710 


Front Cover: 

Slightly structured surface Finish: Polystyrene, white RAL 9016 

5 

Ironing board for IRONFIX for installation behind doors 

Accessories for ironing board IRONFIX 

Iron cloth for ironing board Ironfix 

• Version: Foldable, 180° turnable with positioning every 15°, 

complete pre-assembled 

• Finish: Steel powder coated, white RAL 9016 

• Fit into cupboard on a shelf, for optimum space savings 

• Built in width: Min. 520 mm 

• Inside cupboard depth: 350 mm 

• Cupboard height: Min. 125 mm 

• Hardwearing finish-all hardware components made of powder 

coated metal 

Version 

Cat. No. 

Ironfix ironing board, crossways 568.60.780 


• Material: Cotton with foam on back 

• Finish: Natural white with grey stribes 

• Version: With elastic band 


Cat. No. 

568.60.907 


HMA 5.42 




Folding steps 


• Version: With 2 steps 200 x 300 mm and non slip rubber threads 

Colour 

Cat. No. 

Silver/black 505.04.210 

White/grey 505.04.704 


5 

Folding bracket 

• Area of application: For attaching to the folding steps 

• Installation: The folding bracket is fitted with mounting plates for 

fastening a baseboard 

Material 

Cat. No. 

Steel 505.04.419 



Hanging bracket 

Hanging bracket 

• Finish: White plastic coated 

• Size (W x D x H): 140 x 30 x 30 mm 

Material 

Cat. No. 

Steel 505.04.722 



HMA 5.43



Drag hinge for refrigerator door panel 

• Area of application: For connecting built-in refrigerator door to 

cabinet door panel 

• Material: Plastic 

• Colour: Brown 

Packing: 1pc 

Cat. No. 

568.16.007 

Supplied with 

4 Fixing screws 

Note 

Please check with manufacturer that your refrigerator is available or 

not. 

Dimension 

5 

Installation 

Attach the guide to the outer side of 

the refrigerator door. 

Open the refrigerator door to 90° and insert 

the rail into the guide. Now screw on the rail 

perfectly level to the inner side of the cabinet door. 

Max. 8 

Depending on the size of appliance door 

either one or two fittings may be inquired. 


HMA 5.44 




Cabinet hanger 

Knock-in version, load bearing capacity 130 kg/pair 

Depth adjustment 


• Finish: Galvanized 

• Concealed mounting of cabinet hanger behind the rear panel 

(Min. 16 mm free space required) 

Mounting 

Cat. No. 

Right 290.21.900 

Left 290.21.901 

Packing: 1pc. 

Vertical adjustment 17 mm 

Screw-in version, load bearing capacity 130 kg/pair 

Depth adjustment 



• Concealed mounting of cabinet hanger behind the rear panel 

(Min. 16 mm free space required) 

5 

Cat. No. 

Cabinet hanger for screw fixing 290.21.930 

Packing: 1 or 100 pcs. 

Vertical adjustment 17 mm 


Cover cap for cabinet hanger 

Nickel plated 

Cream 

• Installation: Plug-in to Ø 18 mm hole in front of rear panel 

Material 

Cat. No. 

Plastic cream, RAL 9001 290.28.992 

Plastic nickel plated 290.28.993 



HMA 5.45



Cabinet hanger screw-on version 

13 mm 

17 mm 

Screw-in version, load bearing capacity 130 kg/pair 


• Colour: White 

• Vertical adjustment: 13 mm 

• Depth adjustment: 17 mm 

• Lateral adjustment: 8 mm 

Mounting 

Cat. No. 

Right 290.27.910 

Left 290.27.911 

5 

Packing: 1pc. 

Cover cap for cabinet hanger 

• Installation: Slide-in 

Material Left Right 

Plastic white 290.27.981 290.27.980 

Plastic brown 290.27.983 290.27.982 

Plastic grey 290.27.985 290.27.984 

Plastic oak 290.27.989 290.27.988 

Plastic nickel 290.27.987 290.27.986 

Packing: 1pc. 


HMA 5.46 




Press fixing, load bearing capacity 150 kg/pair 

Top panel 

• Material: White plastic 




Side 

Rear panel 

Mounting 

Cat. No. 

Right 290.00.710 

Left 290.00.711 

Packing: 1 or 50 pc. 

Top panel 

Carcase side panel 

Rear panel 

Screw fixing, load bearing capacity 150 kg/pair 

Side 

Top panel 

Rear panel 





Mounting 

Cat. No. 

Right 290.00.700 

Left 290.00.701 


5 

Top panel 


Rear panel 


Screw fixing, load bearing capacity 150 kg/pair 

Top panel 

Side 

Rear panel 

Top panel 






Mounting 

Cat. No. 

Can be used on the left, on the right or in the centre 290.00.720 



HMA 5.47



Wall rail for cabinet hanger 



• Installation: Screw fixing 

Cat. No. 

290.08.900 

Packing: 1, 20 or 250 pcs. 


• Version: Wall rail can be broken in two pieces 

• Installation: Screw fixing 

Finish 

Cat. No. 

Zinc plated 290.15.930 


5 


HMA 5.48 




Adjustable plinth foot, plastic 

• Colour: Black 

• Adjusting range: -5 to +10 mm 

• Installation: With M10 fixing screw or 3 chipboard screws with 

countersunk head Ø 3.5 mm 

Plinth height 

For plinth height 

Cat. No. 

80 mm 637.45.308 

100 mm 637.45.326 

120 mm 637.45.344 

150 mm 637.45.371 


Plinth clip 


Screw Fixing 

Groove mounting 

Installation 

Cat. No. 

Screw fixing 637.45.906 

Groove mounting 637.45.915 


5 

M10 x 33 mm fixing screw 



Length 

Cat. No. 

33 mm 637.45.997 



Cover cap 

Adjusting screw with steel foot plate 

SW 17 hexagon 


• Colour: White 

Diameter 

Cat. No. 

24 mm 637.45.791 

Packing: 1, 100 or 1,000 pcs. 

• Material: Plastic glide 

• Finish/Colour: Nickel plated, glide black 

• Installation: With M10 screw, steel galvanized 

Thread length 

Cat. No. 

20 mm 651.02.909 



HMA 5.49



Adjustable plinth foot, plastic 


• Version: Square or triangular glide 

• Adjusting range: -10 to +18 mm 

• Installation: Press fitting or screw fixing 

With square mounting plate 

Drilling dimensions 

For socket height 60 mm 

For socket height 80 – 200 mm 

Supplied with 

1 Mounting plate 

1 Tube 

1 Adjustable foot 

5 

Mounting height Press fitting Screw fixing 

60 mm 637.80.320 637.80.310 

80 mm 637.80.321 637.80.311 

100 mm 637.80.322 637.80.312 

120 mm 637.80.323 637.80.313 

150 mm 637.80.325 637.80.315 

200 mm 637.80.327 637.80.317 


Plinth panel clip with panel holder 

Installation 

Knocking-in with 

2 pre-mounted nails 

Disassembly ring 

Press fitting into groove 



Installation For rectangular glide For triangular glide 

Knocking-in 637.81.341 637.81.342 

Press fitting 637.81.343 637.81.344 



• Colour: Natural coloured 

Installation 

Cat. No. 

Clamping on 637.81.331 



HMA 5.50 




Adjustable plinth set for extending side panel 

• Material: Plastic mounting plate, connecting piece and adjustable 

foot, steel counterplate and screw 

• Finish/Colour: Mounting plate, connecting piece and adjustable 

foot black 

• Height adjustment: 28 mm 

Supplied with 

1 Mounting plate 

1 Connecting piece 

1 Adjustable foot with M8 screw 

1 Counterplate 

Installation 

5 

Adjustable plinth set 

Mounting plate 

Rectangular Triangular 

Press fitting 637.82.302 637.82.304 

Screw fixing 637.82.301 637.82.303 



Felt, height 10 mm 

• Area of application: For plain floors, e. g. for stone floors, floors 

made of PVC 

• Material: Felt glide cotted with plastic base element 

• Colour: Base element natural coloured, glide grey 

Diameter 

Cat. No. 

20 mm 650.20.206 

24 mm 650.20.242 

28 mm 650.20.304 

Packing: 100 or 1,000 pcs. 


HMA 5.51



Adjusting screw with M10 thread 

• Drive: SW 4 hexagon socket or slot recess 

• Version: With swivelling base plate 

Length L Hexagon socket Slot recess 

60 mm 637.03.009 637.02.009 

70 mm 637.03.018 637.02.018 

80 mm 637.03.027 637.02.027 

90 mm – 637.02.036 

100 mm 637.03.045 637.02.045 

120 mm 637.03.054 637.02.054 

Packing: 100,150 or 200 pcs. 

Protective cap for adjusting screw with M10 thread 


• Colour: Transparent 

Installation 

Cat. No. 

Pushing onto base plate 637.02.090 


Fixing elements with M10 internal thread 

5 

• Finish: Galvanized screw on bracket and plate, bright knock-in T-nut and screw in socket 

Screw on bracket 

Cat. No. 

Screw on bracket 637.07.004 


Screw on plate 

Cat. No. 

Screw on plate 637.09.008 

Knock-in T-nut 

Screw in socket 


Cat. No. 

Knock-in T-nut 031.00.301 


Cat. No. 

Screw in socket 030.00.502 



HMA 5.52

Waste Bins, Kitchen Cabinet Accessories - Hafele

Create successful ePaper yourself

Delete template?

Save as template?