Eletronic Locking System - Hafele

Locking Systems, Locks, Catches and Safes 

Electronic Locking System 

Locker lock, battery operated 

• Function: Battery operated, intelligent locker lock, free choice of 

locker: Every Dialock key can lock and unlock an open locker, and 

also fixed allocation: Dialock key is allocated to a locker, battery 

status indicator: Locker can be opened, but cannot be locked 

when battery change is indicated, emergency opening through 

master key function possible, integrated real-time clock for logging 

of all processes, cable interface for programming 

• Area of application: For indoor use: For wardrobes, lockers and 

compartment cabinets with doors made of wood or HPL 

• Version: Factory settings for right doors, can be adapted to left 

doors, batteries protected against theft 

• Colour: Plastic housing, operating instructions: Silver coloured in 

the form of pictograms 

• Material: Deadbolt: Stainless steel (quality 1.4310) 

• Degree of protection: IP 40 

Dimensions locker lock 

Technical data 

Ambient temperature (operation) 0 to +70 °C 

Storage temperature –20 to +85 °C 

Relative humidity 10 – 90 % 

(not condensed) 

Batteries (4 pieces) 

Service life of battery 

Number of possible Dialock keys 30 

AA 1.5 V type E91 

approx. 18,000 locking 

and unlocking processes 

4 

Installation with flush doors 

Note 

Can only be used with Dialock keys, key tag and KB key wristband. 

Supplied with 

1 Locker lock 

1 Operating instructions in the form of pictograms, self-adhesive 

1 Number plate without numbering 

We reserve the right to alter specifications without notice (HMA Basic 2011/12). 

Installation with overlay doors (U=door overlay) 

Technology 

Cat. No. 

Tag-it TM ISO 231.90.003 

Packing: 1 set 

Order reference 

Please order separately: 

Batteries, 

at least 1 maintenance tool for changing the battery, 

tool key card (see Dialock System Components catalogue, 

Cat. No. 917.48.XXX) for resetting the battery control. 

New products and systems: www.hafele.com 

HMA 4.11



Locker lock operating instructions 

• Function: Short graphical instructions for using locker lock 

• Area of application: For sticking onto door (inside and outside) 

• Material: Plastic, self-adhesive foil 

Supplied with 

100 sets of operating instructions 

Height 

mm 

Width 

mm 

Colour 

Cat. No. 

65 69 Silver coloured 231.81.200 


Maintenance tool 

4 

• Function: For opening the cover of battery hold of locker lock 

• Material: Plastic 

• Colour: Anthracite 

Cat. No. 

Locker lock maintenance tool 231.80.100 

Packing: 1 piece 

Number plate 


**When ordering, please specify the required number (4 digits) 

for the label. 

Battery 

• Function: To identify lockers when locker lock is used 

• Area of application: For sticking onto door 


• Dimensions: 70 x 37 mm 

• Drill hole Ø: 22.3 mm 

Supplied with 

200 number plates 

Cat. No. 

Number plate, neutral (without number) 231.81.100 

Number plate with number** 231.81.000 


• Version: Alkaline manganese battery 1.5 V Mignon 

Cat. No. 

LR06 910.54.980 

Packing: 4 or 40 pieces 


HMA 4.12 

New products and systems: www.hafele.com



FLC Lock case 

• Function: Electromechanical lock, the compact lock is locked if no 

power is supplied 

• Area of application: Furniture and office equipment (tambour doors, 

hinged doors, flaps and lids, drawers) 

• Finish: Lock case and fixing plate: Nickel plated 

• Colour: Locking bolt: Grey or metal 

• Material: Lock case: Zinc alloy, fixing plate: Zinc 

• Version: Locking bolt is held floating for tolerance compensation, 

connecting cable with AMP plug 


Power supply 

Continuous current consumption 

12 V DC 

≤50 mA 

Tensile load 

(in compliance with DIN 68852) 

Door width 

With door closed with 

plastic bolt metal bolt 

200 N 700 N 

Carry out trial installation: 

With overlay door >240 mm 

With inset door >450 mm 

4 

Note 

A furniture handle (hole centres 32 mm) can be screwed to the 

backside of the fixing plate. 

The FLC lock cases (keyed alike) are switched parallel when using 

one DFT furniture terminal and several FLC furniture locks. Several 

FLC lock cases (with different key changes) can be switched 

individually via the OE electronic output extender. 

The drilling template is absolutely necessary for installing the 

FLC lock case. 


Supplied with 

1 FLC lock case with connecting cable 

1 Locking bolt, grey plastic 

1 Locking bolt, metal 

1 Fixing plate 

1 AMP plug 

Version 

FLC without feedback 

contact with plastic bolt 

FLC-C with feedback 

contact with plastic bolt 


Cable length 

m 


Please order drilling template separately. 

Please order metal locking bolt separately. 

Cat. No. 

1 237.56.000 

3 237.56.002 

5 237.56.004 

1 237.56.030 

3 237.56.032 

5 237.56.034 


HMA 4.13



Accessories for FLC lock case 

Locking bolt for glass doors 

• Material: Metal 

• Installation: For glue fixing 

Cat. No. 

Locking bolt for glass doors 237.56.986 


Replacement locking bolt 

Version 

Cat. No. 

Metal, for increased security 237.56.980 

Plastic grey, replacement part 237.56.981 

Packing: 10 pieces 

4 

Replacement fixing plate 

Version 

Cat. No. 

Zinc nickel plated, replacement part 237.56.982 


Drilling template 

Cat. No. 

Drilling template 237.56.990 



Power supply unit (for test purposes) 

• Function: Power supply for short-time use to test/open FLC lock 

cases during installation 


Input voltage 

Output voltage 

230 V AC 

12 V DC 

Cat. No. 

Power supply unit 237.58.140 



HMA 4.14 




RCI Furniture lock 

Drilling pattern hinged door 

and sliding door 

Installation situation sliding door 

15 

31 

38 

20 

22 

10 

73 

60 

15 

29 

Installation situation overlay door 

4 

Note 

The RCI furniture lock is supplied normally closed (fail locked). 

In order to switch from stand-by current to operating current, the 

screws on the rear side must be loosened and the mechanism must 

be turned by 180°. 

Installation situation inset door 

• Area of application: For sliding doors and hinged doors 

• Version: Electromechanical lock, connecting cable with AMP plug, 

stand-by current or operating current, switchable 

• Installation: For screw fixing to inside of cabinet, horizontal and 

vertical installation possible 

• Material: Case: Zinc alloy 



Power supply 

12 V DC 

Continuous current consumption 184 mA 

Holding power 

90 kg 

Temperature range –10°C to 50°C 

Operating mode 

normally closed ("fail locked"), 

or normally open 

("fail unlocked") 

Cable length 

1 m 

Material 

Cat. No. 

Case: Zinc alloy 237.56.062 



HMA 4.15



SDL Sliding door lock 

• Area of application: For indoor use: Furniture and office equipment 

• Version: Electromechanical lock, the lock is locked if no power is 

supplied, connecting cable with AMP plug 

• Material: Housing: Plastic, double running track: Aluminium 

• Installation: Sliding door lock: Groove mounting in base, sliding 

door lock installation: Sliding into Labora runner housing profile 

4 

Installation situation 


Power supply 

min.13 V DC in load operation, 

max. 40 % on period, 

max. 24 V DC in load operation, 

max. 10 % on period 

Note 

The SDL sliding door lock can only be used in combination with the 

Labora sliding door fitting for 6 – 8 mm thick glass. 

Running track length (Labora) 

= internal cabinet dimension – 2 x 110 mm (SDL). 

Only use power supply unit 830.24.010 for supplying power. 

Power consumption 

Tensile load (in compliance 

with DIN 68852) 

1.75 W with 13 V DC (135 mA) 

3.0 W with 17 V DC (175 mA) 

6.0 W with 24 V DC (250 mA) 

> 200 N 

Feedback contact: 

Max. operating voltage 30 V DC 

Max. operating current 300 mA 

Max. switching capacity 5 W 

Sensor resistance 

180 Ohm 

Temperature range 0 °C to 50 °C 

Operating mode 

Normally closed ("fail safe"), function 

mode "permanent open" not permitted 

(overheating) 

Cable length 

3 m 

Supplied with 

1 Locking unit mounted beneath Labora double running track 

110 mm with connecting cable 3 m and AMP plug 

1 Runner catch for installation in Labora runner housing profile 

1 Notched end cap 

Cat. No. 

SDL Sliding door lock 237.56.970 



HMA 4.16 




DFT Furniture terminal 

Keyed alike 

The Dialock furniture locking system can be ordered as set for the 

following solution: 

• For up to 11 keyed alike FLC lock cases which can be controlled, 

unlocked and locked centrally via an antenna module. 

All components can be ordered separately 

• Version: With deadbolt lock function (unlocking and locking with 

electronic key) or spring bolt lock function (unlocking with 

electronic key, automatic locking after 3 seconds) 

• Area of application: Lockers, PO boxes, shopfitting solutions, 

cabinet units with max. 11 keyed alike FLC lock cases 

Supplied with 

1 DFT furniture terminal 

1 DFANT 2 antenna 

1 Flat transformer with 2 AMP sockets 

1 Distributor with 6 AMP sockets 

Technology 

Cat. No. 

Tag-it-ISO processor 237.58.171 


4 


• The Dialock electronic key and the FLC lock case are not included 

in the set. Please order separately. 

• If you want to connect more than 6 keyed alike FLC lock cases, 

please order an additional distributor. 

• For the DFT furniture terminal with spring bolt lock function, please 

also order the Dialock OPEN TIME 74 configuration key card for 

setting the locking time span of up to 120 seconds. 


Circuit diagram, keyed alike 



3 Distributor 

4 Flat transformer 

5 FLC lock case 

Deadbolt function 

In order to activate the deadbolt function, the jumper of connections 

3 and 4 on the terminal strip of the DFT must be removed. 

Now reset using the “reset key card” (Cat. No. 917.42.027). 

For deactivating alternating mode and switching to locking cycle, the 

jumper must be reinserted and a “simple reset” must be carried out. 

Please also refer to the notes in the installation instructions. 


HMA 4.17




With different key changes 

4 



• For max. 8 FLC lock cases with different key changes 

• With an additional electronic output extender, units can be 

controlled, unlocked and locked individually. Higher-level functions, 

well known from master key locking systems, can be set up 

without any problems. 

All components can be ordered separately. 




• Area of application: e.g. lockers, PO boxes, medicine cabinets and 

shopfitting solutions, cabinets, for up to 8 FLC lock cases with 

different key changes 

Supplied with 




1 OE output extender with 8 AMP sockets 

1 Connecting cable (cascading cable) length 1,000 mm, with RJ11 

plugs 

Technology 

Cat. No. 









Circuit diagram, with different key changes 

1 DFT Furniture Terminal 

2 DFANT 2 Antenna 

3 Connecting Cable 

4 OE Electronic Output Extender 

5 Flat Transformer 

6 FLC Lock Case 









HMA 4.18 





Keyed alike and with different key changes 



• Combination of locking authorisations keyed alike and with different 

key changes 

• For max. 11 keyed alike FLC lock cases and max. 8 FLC lock 

cases with different key changes 

All components can be ordered separately. 




• Area of application: E.g. for cabinet units where one part is 

accessible for all employees (up to 11 locking points), and another 

part is accessible only for particular employees (up to 8 locking 

points) 

Supplied with 

1 DFT Furniture terminal with deadbolt lock function 

1 DFANT 2 Antenna 


1 OE electronic output extender with 8 AMP sockets 

1 Connecting cable (cascading cable) length 1,000 mm, 

with RJ11 plugs 

1 Distributor with 6 AMP sockets 

4 

Technology 

Cat. No. 










Circuit diagram, keyed alike and with different key changes 



3 Connecting cable 

4 OE electronic output extender 

5 Flat transformer 

6 FLC lock case 

7 Distributor 









HMA 4.19



DFT/B Furniture terminal 

• Function: Intelligent furniture terminal for controlling electric 

lockings with Dialock keys, standard setting: With spring bolt lock 

function for unlocking with a Dialock key and automatic locking 

after 3 seconds, other settings: Deadbolt lock function for 

unlocking and locking with Dialock key, acoustic feedback for 

confirming the locking action, indication of unlocked doors, for 

example, via external acoustic or optical signal generators 

(optional), indication of the locking status via external LED (optional) 

• Area of application: For indoor use: Shopfitting, equipment and 

furniture. 

• Version: Integrated antenna or connection for external DFANT 2 

antenna, plastic anthracite/light grey housing, with 4 screw straps 

for attachment 


4 

Technical reference 

Not suitable for installation in metal or metal coated furniture. 

The opening time is set to 3 seconds as standard with the spring bolt 

lock function. 

The opening time can be changed to up to 120 seconds with the 

Open Time 74 configuration card. 

The distance between two furniture terminals must be at least 25 cm 

in order to avoid inductive interferences. 


Power supply 

Power supply connection 


Output current 

Connection for electric locking 

Signal input ports 

12 – 17 V DC, 11 – 14 V AC 

Cable with AMP plug, length: 

100 mm 

10.6 V DC 

≤500 mA 

AMP socket 

2 Optocoupler input ports, e.g. 

for FLC-C or reed contact for 

door monitoring 

Note 

A macro is required when installing a signal generator or LED. 

Available on request, if required. 

Antenna Technology Cat. No. 

For external antenna Tag-it TM -ISO processor 237.58.111 


Relay output port 

1 x change over 

Protection class IP 20 

Number of possible lockings 11 FLC per DFT/B, keyed alike 

and with different key changes* 

1 compact lock (model 1049.10 

(RR)/1048.10 (RR)) per DFT/B 

Number of possible Dialock keys 199 

* via additional OE output extender 


HMA 4.20 




Accessories for electronic control sets 

DFANT 2 Antenna 

• Function: Offset reader unit with integrated red/green LEDs for 

indication of the activation status 

• Area of application: For indoor use: For installation in furniture 

• Version: With connecting cable to DFT furniture terminal and 

coaxial plug 

• Colour: Housing: Anthracite, connecting cable: Black 


Dimensions DFANT 2 antenna 

Installation example (A= antenna) 

Note 

Not suitable for installation in metal or metal coated furniture. 

Minimum distance between 2 antennas: 250 mm. 

Mounting example 

Cable length 

Cat. No. 

m 

1 237.58.130 

3 237.58.129 

5 237.58.128 


4 

For recess installation in 35mm cup drilling 

Power supply unit 



Power supply 

230 V AC 


11.5 V AC 

Mains lead length 

3,000 mm 

Cable length secondary side 

150 mm 


For systems with more than 100 lock cases please contact the 

Dialock specialists. 

• Function: Power supply for DFT furniture terminals, MOT wall 

terminals with FLC lock cases and OE electronic output extender 

• Version: Plastic housing: Black, with cable and AMP socket 

(secondary side), with mains lead, suitable for permanent 

operation, short-circuit proof 

• Standard: In compliance with EN 60742, VDE 055 

Wattage 

W 

Output 

current 

A 

Dimensions 

mm 

20 1.67 85 x 68 x 

33 

30 – 35 3.30 103 x 69 x 

35 

40 – 50 4.33 103 x 69 x 

36 

70 – 80 6.60 126 x 89 x 

45 


Suitable for 

max. 25 

FLC lock cases 

max. 45 


max. 60 


max. 100 


Cat. No. 

821.80.041 

821.80.042 

821.80.043 

821.80.045 


HMA 4.21



Power supply unit 110 - 230 V 

• Function: Power supply for DFT furniture terminals, MOT wall 

terminals with FLC lock cases, SDL sliding door lock and OE 

electronic output extender 

• Version: Plug-in connection to connection lead via AMP plug, cable 

length: Primary side 2 m, secondary side: 1.5 m 

• Primary side: 100 – 240 V, 50/60 Hz 

• Secondary side: 5 A, 12 V DC 

Wattage W 

Cat. No. 

50 830.24.010 


DFT relay unit 

4 

• Function: DFT Furniture terminal: For controlling loads with a power 

consumption of more than 500 mA or for controlling devices that 

require potential free contact 

• Area of application: For indoor use (furniture) 

• Material: Housing: Plastic 

• Colour: Housing: Anthracite/light grey 

• Dimensions: 65.5 x 50 x 30 mm 


Note 

The DFT relay unit can be connected directly to the output port 

of the DFT. 

Relay 

Connection to DFT 

1 x UM; potential-free 

Cable with AMP 

plug, length 300 mm 

Contact rating Voltage ≤60 V 

Switching current ≤5 A 

Switching capacity ≤30 W or ≤60 VA 

Cable cross section 

0.2 – 1.5 mm2 

(AWG 24-16) 

Cat. No. 

DFT relay unit 237.56.132 


Extension lead for secondary side 

• Function: For FLC furniture lock, power supply for OE electronic 

output extender 

• Version: Black, with AMP plug and socket 


Power handling capability 

12 V/6 A 

Cable length 

m 

Cat. No. 

1 823.28.318 

2 823.28.327 

5 823.28.351 

10 823.28.360 



HMA 4.22 




Cascading cable 

• Area of application: For connecting the OE electronic output 

extender to the DFT furniture terminal 

• Version: With RJ 11 plugs 

Cable length 

Cat. No. 

m 

5 910.51.093 


Distributor 

• Area of application: For connecting up to 6 FLC lock cases to the 

DFT furniture terminal 

• Version: With 1 AMP plug and 6 AMP sockets 

• Length: 155 mm 


• Colour: White 

4 

Cat. No. 

Distributor 823.28.780 


OE Electronic output extender 

• Function: Port extension from DFT/B furniture terminal, ports can 

be controlled separately by the DFT/B furniture terminal 

• Area of application: For hinged doors and drawers within 

shopfitting and office furniture construction 

• Colour: Plastic housing: Anthracite, cable: Black 

• Version: With AMP plug for connection to the flat transformer, with 

RJ11 plug for connection to DFT/B furniture terminal 


Supplied with 

1 OE electronic output extender 

1 Connecting cable to the electronic control module (500 mm) 

With 8 Open Collector output ports 

(for FLC lock case) 


Cat. No. 

910.51.081 


Power supply 

Continuous current 

consumption 

Contact rating of relays 

Switching voltage 

Continuous current 

Mains lead length 

OE electronic output extender 

relay 

12 V AC 

250 mA 

50 V 

500 mA 

500 mm 

Note 

For use only in combination with Dialock DFT/B furniture terminal. 

Please order DFT/B data cable for connecting DFT/B furniture 

terminal to OE electronic output extender separately. 


HMA 4.23



Signal generator 

Audible 

• Function: For audible indication for DFT Tag-itTM-ISO furniture 

terminal 

• Colour: Plastic housing: Black 

• Version: Connecting cable: 100 mm, piezo sound generator 

4 

Cat. No. 

Signal generator, audible 237.56.140 


Visual 

• Function: For visual red/green indication for DFT Tag-itTM-ISO 

furniture terminal 

• Colour: Housing: Chrome coloured 

• Version: Connection cable 100 mm 

Cat. No. 

LED signal generator 237.56.141 



HMA 4.24 




Programming card 

• Function: For granting access authorisations without software and 

programming station 

• Area of application: Small projects with few Dialock keys 


• Dimensions: 54 x 85 mm, (credit card size) 

Technology 

Cat. No. 



Dialock Clearing card 

• Function: For deleting Dialock keys without software and 





4 

Technology 

Cat. No. 



Open Time 74 Configuration card 

• Function: Changing the opening period at DFT/B furniture terminal 

to up to 120 sec. (standard setting 3 sec.) 

• Area of application: For use in combination with DFT/B furniture 

terminal with Tag-itTM-ISO processor 




Parameter card for locker lock 

Technology 

Cat. No. 



• Function: For transferring configuration parameters from the 

programming station to the locker lock (from version 7 onwards) 

• Area of application: For use in combination with locker lock 



Technology 

Cat. No. 




HMA 4.25



Programming fob 

• Function: For programming access authorisations without software 

and programming station 



• Dimensions: 28 x 56 x 1.7 mm 

Supplied with 

1 Programming fob 

Technology 

Cat. No. 



4 

Dialock Clearing fob 

• Function: For deleting access authorisations without software and 




• Dimensions: 28 x 56 x 1.7 mm 

Supplied with 

1 Clearing fob 

Technology 

Cat. No. 



Reset card (7C) 

• Function: For resetting with the programming card 

• Area of application: Can be used for all Tag-itTM-ISO systems 

• Version: Plastic 


Supplied with 

1 Reset card (7C) 

Technology 

Cat. No. 




HMA 4.26 




KC Key card 


Ambient temperature (operation) –35 to +50 °C 

Data storage 

≥10 years 

• Function: Electronic key for Dialock, 4 independent locking 

authorisations per key card possible 

• Version: Wear and tear free (contactless data transfer), 

maintenance free (without batteries), insensitive to external 

influences such as wetness, moisture, magnetic fields, mechanical 

vibrations, dust, can be reprogrammed at least 100,000 times, 

forgery-proof unique number 


• Colour: White 

• Dimensions: 54 x 85 mm (credit card size) 

Technology 

Cat. No. 


Packing: 1 or 50 or 250 pieces 

KT Key tag 

4 

• Function: Electronic key for Dialock in form of a key tag, 4 

independent locking authorisations per key tag possible 

• Version: Sensitive to moisture, wetness 


• Diameter: 31 mm 



Data storage 

≥10 years 

Technology Colour Cat. No. 

Tag-it TM ISO Red 917.44.099 

Blue 917.44.098 


Key fob 



Ambient temperature (operation) –25 – +60 °C 

Data storage 

≥10 years 

Supplied with 

1 Key fob 

• Function: Electronic key for Dialock, 4 independent locking 

authorisations per key fob possible 

• Version: Wear and tear free (contactless data transfer), 

maintenance free (without batteries), insensitive to external 

influences such as wetness, moisture, magnetic fields, mechanical 

vibrations, dust, forgery-proof unique number 


• Colour: Grey or white 


Tag-it TM ISO Grey 917.44.085 

White 917.44.087 



Customised imprint on request: Print and customise. 


HMA 4.27



Key wristband 

• Function: Electronic key for Dialock, 1 locking authorisation per key 

wristband possible 

• Area of application: In combination with locker lock 

• Material: Polyamide 

• Colour: Housing: Black with white insert, wristband available in 

different colours 



Data storage 

≥10 years 

4 


Tag-it TM ISO Black 917.44.203 

Yellow 917.44.206 

Blue 917.44.208 

Red 917.44.209 

Green 917.44.200 


Number plate 

• Area of application: For attaching to KB key wristband 

• Version: With 4-digit number 

• Material: Polyamide 

Colour 

Cat. No. 

Black 231.81.013 

Yellow 231.81.016 

Blue 231.81.018 

Red 231.81.019 

Green 231.81.010 



When ordering, specify the required number (4 digits) for the label. 


HMA 4.28

Eletronic Locking System - Hafele

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?