eAFK - Oerlikon Barmag - Oerlikon Textile
eAFK - Oerlikon Barmag - Oerlikon Textile
eAFK - Oerlikon Barmag - Oerlikon Textile
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Heating solutions<br />
First heater<br />
Dowtherm*<br />
Dowtherm contact heaters have been successfully used in<br />
<strong>Oerlikon</strong> <strong>Barmag</strong> machines for over 30 years now and are –<br />
even today – state-of-the-art technology, particularly for<br />
multi and microfi laments. Anti-wear nitrated surfaces, deep<br />
V profi le and special pinches for preventing yarn heat-outs<br />
result in high yarn cleanness, extremely even crimping and<br />
excellent dye uptake for the textured yarn.<br />
<strong>Oerlikon</strong> <strong>Barmag</strong> Dowtherm heaters are open close<br />
heaters for easier operation and maintenance, equipped<br />
with manually closing doors. They are available in various<br />
lengths suitable for processing different ranges of products.<br />
Depending on the product portfolio customers can optimize<br />
their production with the right selection and combination<br />
of heater and cooling component. The correct selection of<br />
these components can infl uence<br />
– production speed and capacity<br />
– energy consumption<br />
– yarn quality<br />
*Dowtherm is a trademark of Dow Chemical<br />
8 <strong>eAFK</strong> – <strong>Oerlikon</strong> <strong>Barmag</strong><br />
HTI<br />
The HTI high-temperature heater makes it possible to<br />
achieve high speeds coupled with excellent yarn qualities<br />
due to stable yarn path and uniform heat transfer. The 1 m<br />
long heater consists of two heating zones that, equipped<br />
with special exchangeable inserts – developed and patented<br />
by <strong>Oerlikon</strong> <strong>Barmag</strong> – enable fast and simple replacement<br />
during standard maintenance work.<br />
This increases overall machine effi ciency by minimizing idle<br />
machine time resulting from maintenance and cleaning. The<br />
inserts are cleaned outside the machine, hence eliminating<br />
the customary problems associated with heater cleaning.<br />
Inserts are available for both heating zones, either with<br />
pinches or as full contact inserts. Different inserts can be<br />
combined for optimization of the process, catering to the<br />
special needs of highly critical products.<br />
Due to its design, the <strong>Oerlikon</strong> <strong>Barmag</strong> HTI heater has<br />
signifi cantly lower energy consumption in comparison to<br />
its Dowtherm cousin. This - combined with signifi cant<br />
potential process speed increase – makes the HTI heater is<br />
a worthwhile alternative investment consideration.