eAFK - Oerlikon Barmag - Oerlikon Textile

More documents

Recommendations

Info

HTI upper structures Optimized operation window and versatility, highest process speed, PET/PP/PTT/PLA eAFK HTI: V 1.0 HT/ 1.75 P To widen the operation window the electrical HTI heater can be used. With its temperature range of up to 550°C in addition to fl exibility provided by Barmag’s patented insert technology it allows to process yarns at potentially higher process speeds. In order to compensate for the temperature increase the cooling capacity has to be adapted proportionally. The conventional HTI version comprises a 1.75 m cooling plate which provides a cooling capacity that allows to process fi ne to mid denier at highest possible process speeds. Versatility for effi cient and high quality production at highest process speeds is achieved by… – – – – increased heating capacity increased cooling capacity opening the operational window while shortening the texturing zone to 2.75 m straight yarn path Suitable for fi ne to mid and coarse denier in the range of 30 – 300 den with an optimized operational window 22 eAFK – Oerlikon Barmag
eAFK HTI coolfl ex 1.0/1.2 active: V 1.0 HT/ 1.2 T To further widen the operation window the HTI heater is paired with Barmag’s cooling tube technology, that while shortening the texturing zone increases the cooling capacity beyond the capacity of the 1.75 m plate for the most demanding products. The ambient air cooling effect can be boosted with activation of air conditioned cooling thus allowing to optimally process products with different processing requirements fl exibly and by elimination of all bottle necks with the highest possible process speed exceeding the conventional HTI version. Versatility for effi cient and high quality production at highest process speeds is achieved by… – increased heating capacity – increased cooling capacity with active air cooling option – opening the operational window while shortening the texturing zone to 2.2 m – straight yarn path Suitable for fi ne to mid and coarse denier in the range of 30 – 300 den with an optimized operational window eAFK HTI coolfl ex 1.0/0.8 active: V 1.0 HT/ 0.8 T Similarly to the Dowtherm heater coolfl ex version the HTI heater can be paired with the shorter cooling tube of 0.8 m length. Although decreasing the cooling capacity limits the operation window the shortening of the texturing zone leads to optimization for very fi ne denier and super micro yarns. The limitation is partially compensated with the also in this version available active cooling technology. Versatility for effi cient and high quality production at highest process speeds is achieved by… – – – – – increased heating capacity optimized cooling capacity with active air cooling option optimizing the operational window while shortening the texturing zone to 1.8 m straight yarn path Suitable for very fi ne to mid denier in the range of 20 – 200 den with an optimized operational window eAFK – Oerlikon Barmag 23
Page 1 and 2: eAFK Solutions for automatic draw t
Page 3 and 4: Table of contents eAFK 4 Feed syste
Page 6 and 7: Feed systems Godet feed unit The si
Page 8 and 9: Heating solutions First heater Dowt
Page 10 and 11: Cooling solutions Depending on prod
Page 12 and 13: Twist insertion Oerlikon Barmag has
Page 14 and 15: Intermingling Intermingling of yarn
Page 16 and 17: Take up solutions With the further
Page 18 and 19: Cross sections… Although the eAFK
Page 20 and 21: Dowtherm* upper structures Fine to
Page 24 and 25: Plant Operation Center POC - Plant
Page 26 and 27: SUN - Service Unlimited Getting you
Page 28: Oerlikon Barmag Zweigniederlassung

eAFK - Oerlikon Barmag - Oerlikon Textile

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?