eAFK - Oerlikon Barmag - Oerlikon Textile
eAFK - Oerlikon Barmag - Oerlikon Textile
eAFK - Oerlikon Barmag - Oerlikon Textile
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Tube<br />
Cooling tubes have been developed by <strong>Oerlikon</strong> <strong>Barmag</strong> in response to rising requirements in downstream texturing<br />
in regard to process speed and friction. By using specially treated tubes <strong>Oerlikon</strong> <strong>Barmag</strong> developed cooling<br />
components that cover a wide range of products, eliminate cool-outs and offer improved process speeds due to<br />
reduced texturing zone length. The tubes are cooled by ambient air, but can also be connected to an air conditioning<br />
system to increase their cooling effect – so called active cooling – for an even wider range of applications.<br />
Cooling<br />
length<br />
Titer range<br />
den<br />
Preferred<br />
operational<br />
range<br />
Yarn treatment Usually in<br />
combination<br />
with heater<br />
0.80 m 20 – 300 20 – 200 ++ 1.5 m DT*<br />
1.0 m HTI*<br />
Typically used<br />
for polymer/<br />
den<br />
PET, PA, PP,<br />
PTT<br />
20 – 200<br />
1.20 m 30 – 600 70 – 300 O 1.0 m HTI* PET, PA, PP,<br />
PTT<br />
70 – 300<br />
Typical<br />
application<br />
Fine yarn, micro and<br />
multifi lament<br />
High speed<br />
Low friction<br />
Fine yarn, micro and<br />
multifi lament<br />
Commodities,<br />
High speed<br />
<strong>eAFK</strong> – <strong>Oerlikon</strong> <strong>Barmag</strong><br />
11