Attachment6 - Engineering Projects India Ltd.

More documents

Recommendations

Info

43 22.8 P-347 Demolishing cement concrete manually by mechanical means including disposal of material within a 50 meters as per the direction of Engineer in Charge 15.2.1 1:3:6 or richer mix m 3 16 368.48 5895.68 44 6.4 P-99 Brick work with FPS bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes & sizes. 6.4.1 Cement mortar 1:4 ( 1 cement : 4 coarse sand) m 3 5 2357.4 11787.00 45 6.5 P-99 Extra for brick work in super structure above floor V level for each four floor or part thereof by mechanical means by lifting material using mobile crane m 3 5 190 950.00 46 13.5 P-201 15 mm cement plaster on rough side or half brick wall of mix: 13.5.2 1:6 ( 1 cement: 6 course sand) m 2 206 84.55 17417.30 47 13.39 P-204 Colour washing such as green, blue or buff to given an even shade: 13.39.1 New work (two or more coat colour) with a base coat with cement prime m 2 206 9.3 1915.80 48 17.4 P-263 Fixing white vitrioviding & fixing white vitreous china flat back or wall concern type lipped front urinal basin of 430x260x350 mm & 340x260x350 mm sizes respectively with automatic flushing cistern with standard flush pipe & CP brass spreader with brass brackets, cutting & making good the wall & floor as reqd.. 17.4.1 One urinal basin with 5 liter white PVC automatic flushing cistern. each 4 2018.7 8074.80 49 2.10 P-65 Excavation trenches of required width for pipes, cables, etc including excavation for sockets & dressing of sides ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layer by ramming, watering, etc & depositing of surplus excavated soil as directed with in a lead of 50 mm: 2.10.1 all kinds of soil 2.10.1.2 Pipes cables etc exceeding 80 mm dia but not exceeding 300 mm dia m 25 115.05 2876.25 50 19.1 P-315 Providing laying & jointing glazed stoneware pipe grade A with stiff mixture of cement mortar in the proportion of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete 19.1.1 100 mm diameter each 25 105.05 2626.25 7
51 19.3 P-315 Providing laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) upto haunches of SW pipes including bed concrete as per standard design. 19.3.1 100 mm dia S.W. pipe m 25 157.4 3935.00 52 18.17 Providing & fixing gun metal gate valve with C.I. wheel of approved P-293 quality (screwed end) 18.17.1 25 mm nominal bore each 7 285.5 1998.50 18.17.4. 50 mm nominal bore each 1 578.2 578.20 0.00 53 18.19 P-293 Providing & fixing gun metal non return valve of approved quality (screwed end) 18.19.4 50 mm nominal bore 18.19.4. 1 Vertical each 1 847.2 847.20 54 18.76 Cutting holes upto 30x30 cm in walls including making holes good the same P-305 18.76.1 With FPS bricks each 100 90.9 9090.00 55 18.78 P-306 Making chases upto 7.5x 7.5 cm in walls including making good & finishing with matching surface after housing G.I pipe etc. m 120 36.65 4398.00 58 10.30 P-163 Providing & fixing in position collapsible steel shutter with vertical channels 20x10x2 mm & braced with flat iron diagonals 20x5 mm size with top & bottom rail of T iron 40x40x6 mm dia steel pulleys complete with bolts nuts locking arrangement stopper, handle, including applying primer coat of approved steel primer m 2 8.4 2592.7 21778.68 59 17.38.1 P-268 Providing & fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts & nuts complete 100 mm Nos 56 255 14280.00 60 17.41.1.1 P-269 Providing & fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts & nuts complete Sand cast iron S & S as per IS- 1729 Nos 12 513.85 6166.20 61 17.60.1 P-272 Providing & fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete including cost of cutting & making good the wall & floors : 100 mm inlet & 100 mm outlet. Nos 7 544.3 3810.10 62 17.41.1.1 P-269 Providing & fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, 100x100x100x100 mm Nos 2 513 1026.00 8
Page 1 and 2: TENDER DOCUMENT TENDER No.:NRO/CON/
Page 3 and 4: DSR Items NAME OF PROJECT: RENOVATI
Page 5 and 6: 22 13.48 P-205 Finishing wall with
Page 7: 37 9.118.2 P-153 30 mm thick factor
Page 11 and 12: Total 1579338.96 Add escalation@ 35
Page 13 and 14: NAME OF PROJECT: RENOVATION AT OLD
Page 15 and 16: 16 MCBTPIS P-20 Supplying & fixing
Page 17 and 18: 6 Finishing end of the following ca

Attachment6 - Engineering Projects India Ltd.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?