Attachment6 - Engineering Projects India Ltd.
Attachment6 - Engineering Projects India Ltd.
Attachment6 - Engineering Projects India Ltd.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
30 17.71<br />
P- 274<br />
Providing & fixing PTMT liquid soap container 109 mm wide, 125 mm height, 112 mm<br />
distance from the wall of standard shape with bracket of the same material with snap fittings<br />
of approved quality & colour weighing not less than 190 grms<br />
each<br />
7 164.65<br />
1152.55<br />
31 18.74<br />
P-305<br />
Providing & fixing unplasticised PVC connection pipe with PTMT nuts collar & bush of<br />
approved quality & colour:<br />
18.74.1 15 mm nominal bore with 30 cm length each 30 45.55 1366.50<br />
32 17.28<br />
P-267<br />
Providing & fixing PVC waste pipe for sink or wash basin including PVC waste fitting<br />
complete:<br />
17.28.2.1 32 mm dia each 14 46.8 655.20<br />
33 19.30<br />
P-322<br />
Constructing brick masonry chamber for underground C.I. inspection chamber & bends with<br />
75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) CI cover with<br />
frame light duty) 455 x 610 mm internal dimension, total weight of with frame to be not less<br />
19.30.3 Inside dimension 600 x 850 mm & 45 mm deep for single pipe line each 2 4068.5 8137.00<br />
34 13.62<br />
P-206<br />
Painting with synthetic enamel paint of approved brand & manufacture of required colour to<br />
give an even shade.<br />
13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of<br />
approved & manufacturer.<br />
m 2 188.06 51.3<br />
9647.48<br />
35 14.5 Renewing glass panes with putty & nails wherever necessary<br />
P-215<br />
14.5.1 Float glass panes of thickness of 4 mm m 2 57.12 427.6 24424.51<br />
36 9.117<br />
P-152<br />
Providing & fixing factory made UPVC door frame made of UPVC extruded section having an<br />
overall dimension as below (tolerance +/- 1mm) with wall thickness of 2.0 mm +/- 0.2 mm,<br />
corners of the door frame to be mitred & welded of plastic, galvanized brackets & stainless<br />
steel screws. The hinge side vertical of the frames reinforced by galvanized stainless steel<br />
hinges fixed to be the frame complete as per manufacturer pecification & direction of engineer<br />
in Charge.<br />
9.117.1 Extruded section profile size 48 x 40 mm m 30.4 141 4286.40<br />
5