Attachment6 - Engineering Projects India Ltd.

TENDER DOCUMENT
TENDER No.:NRO/CON/ESIC-SEALDAH/502
FOR
RENOVATION AT OLD CMS BUILDINGS CONVERTED TO NURSE TRAINING SCHOOL AT
SEALDEH, KOLKATA
VOLUME – III
PRICE BID
ENGINEERING PROJECTS (INDIA) LIMITED
(A GOVT. OF INDIA ENTERPRISE)
Core-3, Scope Complex, 7, Institutional Area,
Lodhi Road, New Delhi-110003
TEL NO: 011-24361666, 24366226 FAX NO. 011- 24363426

Name of work: Renovation at Old CMS Buildings Converted to Nurse Training School at Sealdeh,Kolkata
NIT NO.:
PRICE SCHEDULE
ESTIMATED
TO BE QUOTED BY TENDERER
SI. No. DESCRIPTION
COST
% (-) Below / At Par Amount ( -) Below / At Par Total Amount( Rs.)
1 2 3 4 5= (3 x 4 ) 3 + 5
In figures In words In figures In words
A. CIVIL WORKS
a) DSR-Items 2132107.6
b) Non-DSR Items 55220
B ELECTRICAL WORKS
a) DSR-Items 237874.725
b) Non-DSR Items 279546
TOTAL TENDER VALUE ( IN WORDS) : Rupees
Seal & Signature of Tenderer
1

DSR Items
NAME OF PROJECT: RENOVATION AT OLD CMS BUILDING CONVERTED TO NURSES TRAINING SCHOOL AT SEALDAH, KOLKATA
SL.No. Schedule/ DESCRIPTION OF WORK UNIT QTY RATE AMOUNT
1 15.56
P-231
Dismantling old plaster or skirting raking out joints & cleaning the surface for plaster including
disposal of rubbish to the dumping ground within 50 meters lead
m 2 4855.54 8.2
39815.43
2 13.5
P-201 15 mm cement plaster on rough side of single or half brick wall of mix:
13.5.2 1:6 (1 cement : 6 Course Sand) m 2 4915.54 84.55 415608.91
3 14.43
P-219
Removing white or colour wash by scrapping & sand papering the surface smooth including
necessary repairs to scratches etc. complete.
m 2 383.55 3.2
1227.36
4 13.37 White washing with lime to give an even shade
P-204
13.37.1 New work (Three or more coats) m 2 4187.79 6.75 28267.58
5 13.47.1
P-205
Finishing wall with Premium Acrylic Smooth exterior paint with Silicone additives of required
shade New work (two or more coat applied@ 1.43 ltr/10 sq mm) over & including base coat of
water proofing cement paint applied
@ 2.20 kg/10 sq mm
m 2 1196.3 60.1
71897.63
6 6.4
P-99
Brick work with FPS bricks of class designation 75 in superstructure above plinth level upto
floor V level in all shapes & all sizes
6.4.1 Cement mortar 1:4 (1 Cement : 4 Course Sand) m 3 19.02 2529.05 48102.53
7 2.6
P-64
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over
areas (excluding 30 cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposa
of excavated earth, lead upto 50 m & lift upto 1.5 m, disposed earth to be levelled& neatly
dressed.
2.6.1 All kinds of soil m 3 17.18 101.85 1749.78
8 16.12
P-241
Dry brick pitching half brick thick in drains including supply of bricks & preparing the surface
complete :16.12.1 With FPS bricks of class designation 75
m 3 7.31 183.55
1341.75
9 4.1
P-79
Providing & laying in position cement concrete of specified grade excluding the cost of cement
& shuttering. All work upto plinth level
4.1.3 1:2:4 ( 1 cement : 2 Course Sand : 4 graded stone aggregate 20 mm nominal size m 3 1.1 3257.45 3583.20
10 5.1
P-88
Providing & laying in position specified grade of reinforced cement concrete excluding the cos
of centering, shuttering, finishing & reinforcement - All work upto plinth level
5.1.3 1:2:4 (1 cement:2 Coarse Sand: 4 grades stone aggregate
20 mm nominal size)
m 3 1.4 3359.6
4703.44
2

11 5.9
P-89 Centering & shuttering including shuttering, propping etc. & removal of form for :
5.9.3 Suspended floors, roofs, landing, balconies & access latform
m 2 16.6 187.35
3110.01
12 5.22 Reinforcement for RCC work including straightening, cutting, bandings, placing in position &
P-92 binding all complete.
522.1 Mild steel & Medium Tensile steel bars
kg
158.72 41.5
6586.88
13 15.12
P-227
Dismantling doors, windows & clerestory windows (steel or wood) shutter including
chowkhats, architrave, holdfasts, etc. complete & stacking within 50 m lead. each
57 54.6
3112.20
15.12.1 Areas 3 sq. meters & below
14 9.1
P-136
Providing wood work in frames doors, windows, clerestory windows & other frame, wrought
framed & fixed in position.
9.1.2 Sal Wood
m 3 1.377 30511.9
42014.89
15 15.13 Taking out doors, windows, clerestory windows shutter
P-227 (steel or woods) including stacking within 50 m lead.
15.13.1 of areas 3 sq. meters & below
each
69 21.4
1476.60
16 18.48
P-300
Providing & placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701
marked with cover & suitable locking arrangement & making necessary holes for inlet, outlet &
overflow pipes but without fittings & the base support for tank
liters.
8000 5.25
42000.00
17 9.70
P-146 Providing & fixing IS : 12817 marked stainless steel butt hinges screws complete.
9.70.2 100 x 58 x 1.90 mm each 378 35.25 13324.50
18 9.97
P-149
Providing & fixing aluminum tower bolts ISI marked anodised (anodic coating not less than
grade AC 10 as per ISI:1868) transparent or dyed to required colour or shade with necessary
9.97.1 250 x 10 mm each 51 62.2 3172.20
9.97.3 200 x 10 mm each 36 52 1872.00
19 9.96
P-149
Providing & fixing aluminum door bolts ISI marked anodised (anodic coating not less than
grade AC 10 as per ISI : 1868) transparent or dyed to required colour or shade with necessary
screws etc. complete each
51 158.5
8083.50
20 9.100 Providing & fixing aluminum handles ISI, marked anodised (anodic coating not less than grade each 138 35.3 4871.40
21 9.5
P-136
Providing & fixing panneled or panneled & glassed shutter for doors windows, & clerestory
windows including ISI marked black enamelled MS butt hinges with necessary screws
excluding panneling which will be paid for separately.
9.5.2 Kiln seasoned & chemically treated Hollok Wood
9.5.2.1 35 mm thick shutter m 2 27.6 899.7 24831.72
3

22 13.48
P-205
Finishing wall with Deluxe Multi surface paint system for interiors & exteriors using Primer as
per manufacturer specification :
13.48.2 painting wood work with Deluxe Multi surface paint of required shade. Two or more coat
applied @0.90/ 10 sqm over & under coat of primer applied @ 0.75/ 10 sqm of approved
brand or manufacturer
m 2 365.98 51.55
18866.27
23 9.48
P-143
Providing & fixing M.S. grill of required pattern in framed of windows etc. with M.S. flats,
square or round bars etc. all complete
9.48.2 Fixed to openings / wooden frames with rawl plug screws etc kg 1197.28 64.4 77104.83
24 18.10 Providing & fixingG.I. pipe complete with G.I. fittings complete & clamps, including cutting &
P-292 making good the wall.
18.10.1 15 mm nominal bore m 40 105.85 4234.00
18.10.2 20 mm nominal bore m 15 133.85 2007.75
18.10.3 25 mm nominal bore m 10 179.65 1796.50
18.10.5 40 mm nominal bore m 20 264.05 5281.00
18.10.6 50 mm nominal bore m 20 342.9 6858.00
25 17.1
P-263
Providing & F water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast iron
P or S trap. 10 lt. low level white PVC flushing cistern with manually controlled device ( handle
lever) conforming to I.S. 721, with all fitting & fixture complete including cutting & making
good damages the wall & floors wherever required:
17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with intrigal type foot
rests.
each
7 2304.85
16133.95
26 17.24
P-267
Providing & fixing White Vitreous china squatting plate urinal with intrigral rim longitudinal
flush pipe
each
4 1096.65
4386.60
27 17.7
P-264
Providing & fixing wash basin with CI brackets, 15 mm CP brass pillar taps, 32 mm CP brass
waste of standard pattern, including painting of fittings & making good the walls wherever
required:
17.7.4 White Vitreous china flat wash basin size i.e. 550x400 mm with single 15 mm C.P brass
pillar tap.
each
7 1044.9
7314.30
28 17.32
P-267
Providing & fixing mirror superior glass ( of approved quality) & of reqd.shape & size with
plastic molded frame of approved make & shade with 6 mm thick hard board backing:
17.32.1 Circular shape 450 mm dia each 7 599.15 4194.05
29 Providing & fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP
brass screw with concealed fittings arrangement of approved quality & colour: each
17.73.2. 60 mm long towel rail total length of 496 mm, 78 mm wide & effective height of 88 mm,
weighing not less than 190 grms
7 329.5
2306.50
4

30 17.71
P- 274
Providing & fixing PTMT liquid soap container 109 mm wide, 125 mm height, 112 mm
distance from the wall of standard shape with bracket of the same material with snap fittings
of approved quality & colour weighing not less than 190 grms
each
7 164.65
1152.55
31 18.74
P-305
Providing & fixing unplasticised PVC connection pipe with PTMT nuts collar & bush of
approved quality & colour:
18.74.1 15 mm nominal bore with 30 cm length each 30 45.55 1366.50
32 17.28
P-267
Providing & fixing PVC waste pipe for sink or wash basin including PVC waste fitting
complete:
17.28.2.1 32 mm dia each 14 46.8 655.20
33 19.30
P-322
Constructing brick masonry chamber for underground C.I. inspection chamber & bends with
75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) CI cover with
frame light duty) 455 x 610 mm internal dimension, total weight of with frame to be not less
19.30.3 Inside dimension 600 x 850 mm & 45 mm deep for single pipe line each 2 4068.5 8137.00
34 13.62
P-206
Painting with synthetic enamel paint of approved brand & manufacture of required colour to
give an even shade.
13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of
approved & manufacturer.
m 2 188.06 51.3
9647.48
35 14.5 Renewing glass panes with putty & nails wherever necessary
P-215
14.5.1 Float glass panes of thickness of 4 mm m 2 57.12 427.6 24424.51
36 9.117
P-152
Providing & fixing factory made UPVC door frame made of UPVC extruded section having an
overall dimension as below (tolerance +/- 1mm) with wall thickness of 2.0 mm +/- 0.2 mm,
corners of the door frame to be mitred & welded of plastic, galvanized brackets & stainless
steel screws. The hinge side vertical of the frames reinforced by galvanized stainless steel
hinges fixed to be the frame complete as per manufacturer pecification & direction of engineer
in Charge.
9.117.1 Extruded section profile size 48 x 40 mm m 30.4 141 4286.40
5

37 9.118.2
P-153
30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles & rails of a
UPVC hollow section of size 60 x 30 mm & wall thickness 2 mm +/- 0.2 mm with inbuilt
decorative moulding edging on one side. The styles & rails mitred & joined at the corners by
means of MS galvanized / plastic bracket of size 75 x 220 mm having wall thickness of 1.0
mm & stainless steel screws. The styles of the shutter reinforced by inserting galvanized MS
tube of size 25 x 20 mm & 1 mm +/- 0.1 mm wall thickness. The lock rail made up of H
section a UPVC hollow section of sixe 100 x 30 mm & 2 mm +/- 0.2 mm wall thickness fixed
to the shutter styles by means of plastic / galvanised MS U cleats. The shutter frame filled
with a UPVC multi chamber single panel of size not less than 620 mm, having overall
thickness of 20 mm & 1 mm +/- 0.1 mm wall thickness, the panels filled vertically & tie bar at
two places by inserting horizontally 6 mm galvanised MS rod & fastened with nuts & washer,
complete as per manufacturer specification & direction of engineer-in-Charge
m 2 14.7 2271.8
33395.46
38 16.12
P-241
Dry brick pitching half thick in drains including supply of bricks & preparing the surface
40 183.55
complete m 2
7342.00
16.12.1 With FPS bricks of class designation 75
39 4.1
P-241
Providing & laying in position cement concrete of specified grade
excluding the cost of centering & shuttering -all work upto the plinth
level:
4.1.3 1:2:4 (1 cement:3 coarse sand: 4 graded stone aggregate m 3 16 3257.45 52119.20
20 mm nominal size)
40 11.3
P-172
Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 floating
coat of neat cement including cement slurry, but excluding the cost
of nosing of steps etc. complete.
11.3.1. 40 mm thick with 20 mm nominal size stone aggregate m 2 128 192.95 24697.60
41 22.14 Grading roof for water proofing treatment with:
P-348
22.14.2 Cement mortar 1:3 (1 cement 3 coarse sand m 3 13.48 5045.35 68011.32
42 22.8
P-347
Providing & laying four courses water proofing treatment with bitumen felt over roof consisting
of first & third courses of blown bitumen 85/25 or 95/15 conforming to IS : 702 applied hot@
1.45 kg/sqm of area for each course, second course of roofing felt type 3 grade-I (hessain
based self finished bitumen felt) and fourth & and final course of stone grit 6 mm & down size
or pea sized gravel spread at 6 cubic dia/sqm including preparation of surface but excluding
grading complete with:
22.8.1 Bitumen felt (hessain based) type 3 grade Conforming to IS : 1322 m 3 384.2 184.8 71000.16
6

43 22.8
P-347
Demolishing cement concrete manually by mechanical
means including disposal of material within a 50 meters
as per the direction of Engineer in Charge
15.2.1 1:3:6 or richer mix m 3 16 368.48 5895.68
44 6.4
P-99
Brick work with FPS bricks of class designation 75 in superstructure above plinth level upto
floor V level in all shapes & sizes.
6.4.1 Cement mortar 1:4 ( 1 cement : 4 coarse sand) m 3 5 2357.4 11787.00
45 6.5
P-99
Extra for brick work in super structure above floor V level for each four floor or part thereof by
mechanical means by lifting material using mobile crane
m 3 5 190
950.00
46 13.5
P-201 15 mm cement plaster on rough side or half brick wall of mix:
13.5.2 1:6 ( 1 cement: 6 course sand) m 2 206 84.55 17417.30
47 13.39
P-204 Colour washing such as green, blue or buff to given an even shade:
13.39.1 New work (two or more coat colour) with a base coat with cement prime m 2 206 9.3 1915.80
48 17.4
P-263
Fixing white vitrioviding & fixing white vitreous china flat back or wall concern type lipped front
urinal basin of 430x260x350 mm & 340x260x350 mm sizes respectively with automatic
flushing cistern with standard flush pipe & CP brass spreader with brass brackets, cutting &
making good the wall & floor as reqd..
17.4.1 One urinal basin with 5 liter white PVC automatic flushing cistern. each 4 2018.7 8074.80
49 2.10
P-65 Excavation trenches of required width for pipes, cables, etc including excavation for sockets &
dressing of sides ramming of bottoms, depth upto 1.5 m including getting out the excavated
soil, and then returning the soil as required, in layer by ramming, watering, etc & depositing of
surplus excavated soil as directed with in a lead of 50 mm:
2.10.1 all kinds of soil
2.10.1.2 Pipes cables etc exceeding 80 mm dia but not exceeding 300 mm dia m 25 115.05 2876.25
50 19.1
P-315 Providing laying & jointing glazed stoneware pipe grade A with stiff mixture of cement mortar
in the proportion of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete
19.1.1 100 mm diameter each 25 105.05 2626.25
7

51 19.3
P-315
Providing laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone
aggregate 40 mm nominal size) upto haunches of SW pipes including bed concrete as per
standard design.
19.3.1 100 mm dia S.W. pipe m 25 157.4 3935.00
52 18.17 Providing & fixing gun metal gate valve with C.I. wheel of approved
P-293 quality (screwed end)
18.17.1 25 mm nominal bore each 7 285.5 1998.50
18.17.4. 50 mm nominal bore each 1 578.2 578.20
0.00
53 18.19
P-293
Providing & fixing gun metal non return valve of approved quality (screwed end)
18.19.4 50 mm nominal bore
18.19.4. 1 Vertical each 1 847.2 847.20
54 18.76 Cutting holes upto 30x30 cm in walls including making holes good the same
P-305
18.76.1 With FPS bricks each 100 90.9 9090.00
55 18.78
P-306
Making chases upto 7.5x 7.5 cm in walls including making good & finishing with matching
surface after housing G.I pipe etc.
m
120 36.65
4398.00
58 10.30
P-163
Providing & fixing in position collapsible steel shutter with vertical channels 20x10x2 mm &
braced with flat iron diagonals 20x5 mm size with top & bottom rail of T iron 40x40x6 mm
dia steel pulleys complete with bolts nuts locking arrangement stopper, handle, including
applying primer coat of approved steel primer
m 2 8.4 2592.7
21778.68
59 17.38.1
P-268
Providing & fixing bend of required degree with access door, insertion rubber washer 3 mm
thick, bolts & nuts complete 100 mm
Nos
56 255
14280.00
60 17.41.1.1
P-269
Providing & fixing double equal junction of required degree with access door, insertion rubber
washer 3 mm thick, bolts & nuts complete Sand cast iron S & S as per IS- 1729
Nos
12 513.85
6166.20
61 17.60.1
P-272
Providing & fixing trap of self cleansing design with screwed down or hinged grating with or
without vent arm complete including cost of cutting & making good the wall & floors :
100 mm inlet & 100 mm outlet.
Nos
7 544.3
3810.10
62 17.41.1.1
P-269
Providing & fixing double equal junction of required degree with access door, insertion rubber
washer 3 mm thick, 100x100x100x100 mm
Nos
2 513
1026.00
8

63 10.11
P-164
Providing & fixing factory made ISI marked steel glassed doors, windows & ventilators
side/top/centre hung with beading and all members such as K12B & K12 B etc. complete
standard rolled steel sections, joints mitred & flash butt welded & sah bars tenoned & riveted
with 15x3 mm lungs, 10 cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6
(1cement :3 course sand : 6 graded stone aggregate 20 mm nominal size) or with wooden
plugs & screws or rowel plugs & screws or with fixing clips of hinges or with bolts & nuts as
required, including providing & fixing of hinges, pivots, float glass panes with glazing clips &
special metal sash putty of approved makes & a priming coat of approved steel primer
excluding the cost of metal beading & other fitting except necessary hinges or pivots complete
as per approved design
kg
823 178.9
147234.70
64 17.37
P-268
Providing & fixing M.S holder bat clamps of approved design to Sand Cast iron/cast iron
embadded in 7 including cement concrete blocks 10x10x10 cc of 1:2:4 mix (1 cement : 2
course sand : 4 graded stone aggregate 20 mm nominal sizes) including cost of cutting holes
& making good the walls etc.
17.37.1 for 100 mm dia pipe Nos. 83 65.35 5424.05
65 18.46 Providing & fixing G.I pipe including cutting & threading the pipe &
P-299 making long screw ete complete (New work)
18.46.1 15 mm dia nominal bore Nos 46 75.9 3491.40
18.46.2 20 mm dia nominal bore Nos 55 96.8 5324.00
18.46.3 25 mm dia nominal bore Nos 57 107.25 6113.25
18.46.5 40 mm dia nominal bore Nos 70 123.55 8648.50
18.46.6 50 mm dia nominal bore Nos 55 235.6 12958.00
66 18.50 Providing & fixing C.P bras nose bib cock of approved quality conforming to IS standards &
18.50.1 15 mm dia nominal bore Nos. 14 262.05 3668.70
67 2.33
P-68
Felling trees of the grith (measured at a height of 1 m above ground level) including cutting of
trunks & branches removing the roots & stacking of serviceable material & disposal of
unserviceable material .
2.33.1 Beyond 30 cm grith upto & including 60 cm grith Nos 77 81.7 6290.90
68 19.19
P-320
Providing & fixing inposition pre cast R.C.C manhole cover & frame of required shape &
approved quality.
19.19.3.2 Circular shape 560 mm internal diameter Nos 4 1110.3 4441.20
69 17.35 Providing & fixing soil, waste & vent pipe
P-268
17.35.1.1 Sand cast iron S&S pipe as per I.S. 1729 m 62.22 451 28061.22
9

Total 1579338.96
Add escalation@ 35.0 % (Memo No.14(2)/95- Works dated 17.07.08 552768.64
TOTAL RUPEES 2132107.60
10

NAME OF PROJECT: RENOVATION AT OLD CMS BUILDING CONVERTED TO NURSES TRAINING SCHOOL AT SEALDAH,
KOLKATA
NON DSR Items
SL.No. DESCRIPTION OF WORK UNIT QTY RATE
(Rs.)
AMOUNT
(Rs.)
1
Removal of rubbish earth etc. from the working site & disposal of thesame
beyond the compound, in conformity with the Municipal Corporation Rule for
such as disposal loading into truck & cleaning the site in all respect as per the
direction of the Engineer in Charge.
3.1 Hire charge of lorry/trip...................................Rs. 400.00
3.3 3.2 Loading unloading of material/trip...........Rs.150.00
trip 14 550.00 7700.00
2 Renewing cournice ( with moulding but without floral or similar intricate
patterns) including necessary masonry work and 12 mm thick cement plaster
(4:1) complete
Projection (400x4500) mm
Depth 325 to 400 mm
m 132 360.00 47520.00
TOTAL Rs. 55220.00
11

NAME OF PROJECT: RENOVATION AT OLD CMS BUILDING CONVERTED TO NURSES TRAINING SCHOOL AT SEALDAH, KOLKATA
DSR 2007 Items
SL.
No.
1
Schedule/
Pg No.
WGPVC
P-3
DESCRIPTION OF WORK
UNIT QTY RATE
(Rs.)
AMOUNT
(Rs.)
Point wiring in PVC conduit, with piano type switch,
Wiring for light point/fan point/exhuast fan/ call bell point with1.5 sq.mm. Fr PVC insulated copper
conductor single core cable in surface/ recessed PVC Conduit with piano switch, phenolic laminated sheet, Nos. 170 305.00 51850.00
suitable size MS box & earthing the point 1.5 sq. mm. FR PVC insulated copper conductor single core
cable etc. as required
2
3
WGPVC
P-4
LPACCPT
P-9
Circuit/sub main wiring in PVC conduiteWiring for circuit/sub main/wiring alongwith earth wire the following
sizes of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required:
1.14.1 2x1.5 sq.mm. +1x2.5 sq.mm. earth wire m 190 71.00 13490.00
1.14.2 2x2.5 sq.mm. +1x2.5 sq.mm. earth wire m 400 81.00 32400.00
1.14.3 2x4 sq.mm. +1x4 sq.mm. earth wire m 80 97.00 7760.00
1.14.4 4x6 sq.mm. + 2x6 sq.mm. earth wire m 50 207.00 10350.00
S/F light plug point piano type accessories
Supply & fixing metal box of 150 mix 75mmx60mm deep ( nominal size) on surface or recessed with
suitable size phenolic laminated sheet in front including pf & f 3pin 15/16 amp. Socket outlet & 15/15 amp.
piano type switch connection as required
Nos 50.00 102.00 5100.00
4
PPACCPT
P-9
S/F power plug point piano type accessories
Supply & fixing metal box of 150 mix 75mmx60mm deep ( nominal size) on surface or recessed
with suitable size phenolic laminated sheet in front including pf & f 6pin 15/16 amp. Socket outlet & 15/15
amp. piano type switch connection asrequired
Nos 22.00 161.00 3542.00
5
CREB
P-9
S/F Ceiling Rose
Supplying & fixing 3 pin 5 amp ceiling rose on the existing junction box / wooden block including connection Nos 170 19.00 3230.00
as required
6
MODFREB
P-8
S/F modular type electronic fan regulator.
Supply & fixing stepped type electronic fan regulator on the existing modular plate switch box excluding
modular plate as required.
Nos. 36 247.00 8892.00
12

7
SPMCBDB
CO/ P-16
Supplying & fixing following way single pole & nutural, sheet steel MCB distribution board, 240 Volt on
surface / recessed complete with tinned copper bus ba rearthbar, din bar, detachable gland plate,
interconnection, phospetis & powder painted including earthing etc. as required. (but without MCB / RCCB
/ Isolator)
2.32.3 2+8 way, single door Nos 10 654.00 6540.00
8
MCBC
P-20 Supplying & fixing 5 amp. To 32 amps. Rating, 240 Volts 'C' series MCB suitable for iv\inductive load of
following poles in the existing MCB DB complete with connection testing & commissioning as required
Nos 64 94.00 6016.00
9
CADIS
P-20
Supplying & fixing following rating four pole 415 V insulators in the existing MCB DB complete with
connection & commissioning as required 2.54.1 40 Amps
Nos 10 166.00 1660.00
10
ITCFFDR
P-11
Installation, testing,& commissioning of prewired fluorescent fitting / compact fluorescent fitting of all types,
complete with all accessories and tube etc. including supply & fixing ball & socket arrangement,2 no. down
rod of 20 mm dia x 1.6 mm thick steel conduite upto 30 cm lem\ngth, painting & wiring the down rod and
connection with 1.5 mm FR PVC insulated copper wire single core
cable & earthing etc.
Nos 63 126.00 7938.00
11
CARFAN
P-12 Carriage of ceiling fan & regulator / exhaust fan from store to site as required
Nos 36 10.00 360.00
12
EARPIPCH
AR/P-23
Earthing with GI earth pipe 4.5 m long, 40 mm dia including accessories, and providing masonry enclosure
with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required.
Set 2 1971.00 3942.00
13
EARGIST
PIP/P-24
Providing & fixing 25x5 mm G.I. strip in 40 mm dia G.i pipe from the earth electrode as required
m 8 218.00 1744.00
14
EARBUS
P-25
Providing & fixing earth busbar of 50 mm x 5mm Aluminium strip on the surface for connection etc. as
required
m 1.50 665.00 997.50
15
PWTPMEB
DB/ P-18
Supplying & fixing following way three pole & nutural prewired & sheet steel, MCB distribution board, 415 V
on surface /recess complete with loose wire box, terminal box, duly prewired with suitable size blocks,
tinned copper busbar, nutral link, earth bar, detachable gland plate, reconnections,phospetised & powder
painted including earthing etc. as required (But without MCB/RCCb/Isolators 4 Way (4+ 12), Single Door
Nos 2 4834.00 9668.00
13

16
MCBTPIS
P-20
Supplying & fixing following rating 4 pole 415 V isolator in the existing MCB DB complete with connective
testing & commissioning etc. as required
2.55.2 63 amps
Nos 2 362.00 724.00
Total Sum of DSR Items (A) 176203.50
Add escalation @ 35%(B) 61671.225
Total Sum (A+B=C) 237874.73
14

NAME OF PROJECT: RENOVATION AT OLD CMS BUILDING CONVERTED TO NURSES TRAINING SCHOOL AT SEALDAH, KOLKATA
Non DSR Items
SL.
No.
DESCRIPTION OF WORK UNIT QTY RATE
(Rs.)
AMOUNT
(Rs.)
1
Providing fitting, fixing of fluorescent light fittings ( Make Phillips, of following Type)
with supply of 1/2 Nos. as required 40 Watts tube light, 2 Nos. round block etc in
the wall including end connection including the labor of cutting the housing of false
ceiling.
(I) TMC 100/136 NW 1x36W/TL40W Nos. 35 485.00 16975.00
(II) TMC 501/136/HF (EBW) 1xTLD 36W Nos. 63 1136.00 71568.00
2
Providing street light luminate with single piece die cast alluminium housing POT
optics reflector & acrylic cover ( Make : PHILIPS, Type SRP- 51/150. 1x SON t 150
W) & fixing only outdoor street light type fluorescent or MV light fittings with all
accessories to be fixed / projected from the wall of the building including making
holes/ providing clamping arrangement & necessary GI reducers supply & fixing
40mm (1.5" dia) dia G.I. pipe class -B medium quality 1.5m average length having
suitable band supply & fixing necessary length of PVC wire & making connection
as required & mending good damages to wall including painting.
Nos. 3 7726.00 23178.00
3
Providing and fitting fixing of call bell of approved make including end connection
Nos. 3 215.00 645.00
4
5
Supply installation & commissioning of 2 H.P monoblock pump (Make : Kirloskar or
approved brand Type: single phase, 1.5 KW, suction 50mm & delivery 40mm)
including supply of installation & commissioning of direct on line starter (make :
Havalls or equivalent Type: DO ;HE-1) including installation of suitable size M.S
angle frame, !.5" check valve with electrical & plumbing connection.
Providing fitting fixing of 12" dia exhaust fan of approved make (Make EPC or
equivalent) of 920 RPM
Nos. 1 11700.00 11700.00
Nos. 9 2750.00 24750.00
15

6
Finishing end of the following cable by crimping method including supply & fixing
dowells, solderless socket, tapes and joints materials:
(a) 6 Sq.mm PVC Ai. Cable.
Nos. 8 16.00 128.00
7
Supply & fixing of compression gland complete with brass gland, rubber ring, for
dust & moister proof entry of PVC armoured cable as below : 2 core 6 sqm.
(Rate derived from PWD schedule 2001, P-f-3/ lt-6 a)
Nos. 8 22.70 181.60
8
9
10
Supplying & laying of the following size cable : 1.1 KV grade alluminium armoured
cable (size: 6 sq.mm, 2 core) with alluminium conductor (I.P.) conforming I.S. 1554
part 1/1982
Providing, fitting fixing of 5 in 1/16 Amp combined switch socket (Anchor Make)
including supply of base box & end connection.
Fabrication of following size triple pole and nutral bus bar made with 16
SWGCRCA sheet and required size copper bar and duly paint with two coats of
red oxide and finish paint including irrection and end connection.
(ii) 18" x 10" x 6" for 100A TPN bus bar
m 25 162.00 4050.00
Nos. 22 128.00 2816.00
Nos. 1 2050.00 2050.00
11
12
Providing, fitting, fixing of 48" dia ceiling fan of approved make including wiring the
down rod of standard length (upto 30 cm) with 1.5 sq mm Fr PVC insulated copper
conductor single core cable as required.
Extra for suspension exceeding 25 cm with S& f additional 2 x 20 mm dia E.I.
conduite (14 SWG) supports & necy. 1/1.40 twin flat or 2 x 1/1.40 PVC wire &
painting (Rate derived from PWD schedule 2001, P-C-3/ lt-18
Nos. 36 2059.00 74124.00
m 60 86.00 5160.00
13
Providing, fitting, fixing of 63 Amp triple pole FSU, 415V, with nutral link, switch fuse
unit mount on iron frame (TYPE : SRTE 4063, Make - Havalls) including
commissioning & testing including fabrication of iron structure & grouting.
Nos. 2 3150 6300.00
16

14
15
16
Providing, fitting, fixing of 100 Amp triple pole FSU, 415V, with nutral link, switch
fuse unit mount on iron frame (TYPE : SRTE 4063, Make - Havalls) including
commissioning & testing including fabrication of iron structure & grouting.
Supply, Fabrication & making C.I. board made of 24 SWG C.O. sheet of minimum
7" depth of following size glow sign board with channels etc. with front side open
for fixing poly carbonate sheet including painting etc. as required. (Approved rate:
Crash Progremme)
Supplying & fitting 1.8 mm thick poly carbonate sheet including coloured lettering
with venyl sheet. (Approved rate : Crash Progremme)
Nos. 1 4200 4200.00
sft. 70 160.00 11200.00
sft. 70 196.00 13720.00
17 Supplying & fixing 4'-0" 40 watt fluorescent tube light fitting with Philips make fuse
choke & starter including connection with 2x1.5 sq.mm. wire etc. as required
Nos 20 340 6800.00
Total Sum for Non-DSR Items 279545.60
Total Sum ,Say 279546
17