Attachment6 - Engineering Projects India Ltd.
Attachment6 - Engineering Projects India Ltd.
Attachment6 - Engineering Projects India Ltd.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
TENDER DOCUMENT<br />
TENDER No.:NRO/CON/ESIC-SEALDAH/502<br />
FOR<br />
RENOVATION AT OLD CMS BUILDINGS CONVERTED TO NURSE TRAINING SCHOOL AT<br />
SEALDEH, KOLKATA<br />
VOLUME – III<br />
PRICE BID<br />
ENGINEERING PROJECTS (INDIA) LIMITED<br />
(A GOVT. OF INDIA ENTERPRISE)<br />
Core-3, Scope Complex, 7, Institutional Area,<br />
Lodhi Road, New Delhi-110003<br />
TEL NO: 011-24361666, 24366226 FAX NO. 011- 24363426
Name of work: Renovation at Old CMS Buildings Converted to Nurse Training School at Sealdeh,Kolkata<br />
NIT NO.:<br />
PRICE SCHEDULE<br />
ESTIMATED<br />
TO BE QUOTED BY TENDERER<br />
SI. No. DESCRIPTION<br />
COST<br />
% (-) Below / At Par Amount ( -) Below / At Par Total Amount( Rs.)<br />
1 2 3 4 5= (3 x 4 ) 3 + 5<br />
In figures In words In figures In words<br />
A. CIVIL WORKS<br />
a) DSR-Items 2132107.6<br />
b) Non-DSR Items 55220<br />
B ELECTRICAL WORKS<br />
a) DSR-Items 237874.725<br />
b) Non-DSR Items 279546<br />
TOTAL TENDER VALUE ( IN WORDS) : Rupees<br />
Seal & Signature of Tenderer<br />
1
DSR Items<br />
NAME OF PROJECT: RENOVATION AT OLD CMS BUILDING CONVERTED TO NURSES TRAINING SCHOOL AT SEALDAH, KOLKATA<br />
SL.No. Schedule/ DESCRIPTION OF WORK UNIT QTY RATE AMOUNT<br />
1 15.56<br />
P-231<br />
Dismantling old plaster or skirting raking out joints & cleaning the surface for plaster including<br />
disposal of rubbish to the dumping ground within 50 meters lead<br />
m 2 4855.54 8.2<br />
39815.43<br />
2 13.5<br />
P-201 15 mm cement plaster on rough side of single or half brick wall of mix:<br />
13.5.2 1:6 (1 cement : 6 Course Sand) m 2 4915.54 84.55 415608.91<br />
3 14.43<br />
P-219<br />
Removing white or colour wash by scrapping & sand papering the surface smooth including<br />
necessary repairs to scratches etc. complete.<br />
m 2 383.55 3.2<br />
1227.36<br />
4 13.37 White washing with lime to give an even shade<br />
P-204<br />
13.37.1 New work (Three or more coats) m 2 4187.79 6.75 28267.58<br />
5 13.47.1<br />
P-205<br />
Finishing wall with Premium Acrylic Smooth exterior paint with Silicone additives of required<br />
shade New work (two or more coat applied@ 1.43 ltr/10 sq mm) over & including base coat of<br />
water proofing cement paint applied<br />
@ 2.20 kg/10 sq mm<br />
m 2 1196.3 60.1<br />
71897.63<br />
6 6.4<br />
P-99<br />
Brick work with FPS bricks of class designation 75 in superstructure above plinth level upto<br />
floor V level in all shapes & all sizes<br />
6.4.1 Cement mortar 1:4 (1 Cement : 4 Course Sand) m 3 19.02 2529.05 48102.53<br />
7 2.6<br />
P-64<br />
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over<br />
areas (excluding 30 cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposa<br />
of excavated earth, lead upto 50 m & lift upto 1.5 m, disposed earth to be levelled& neatly<br />
dressed.<br />
2.6.1 All kinds of soil m 3 17.18 101.85 1749.78<br />
8 16.12<br />
P-241<br />
Dry brick pitching half brick thick in drains including supply of bricks & preparing the surface<br />
complete :16.12.1 With FPS bricks of class designation 75<br />
m 3 7.31 183.55<br />
1341.75<br />
9 4.1<br />
P-79<br />
Providing & laying in position cement concrete of specified grade excluding the cost of cement<br />
& shuttering. All work upto plinth level<br />
4.1.3 1:2:4 ( 1 cement : 2 Course Sand : 4 graded stone aggregate 20 mm nominal size m 3 1.1 3257.45 3583.20<br />
10 5.1<br />
P-88<br />
Providing & laying in position specified grade of reinforced cement concrete excluding the cos<br />
of centering, shuttering, finishing & reinforcement - All work upto plinth level<br />
5.1.3 1:2:4 (1 cement:2 Coarse Sand: 4 grades stone aggregate<br />
20 mm nominal size)<br />
m 3 1.4 3359.6<br />
4703.44<br />
2
11 5.9<br />
P-89 Centering & shuttering including shuttering, propping etc. & removal of form for :<br />
5.9.3 Suspended floors, roofs, landing, balconies & access latform<br />
m 2 16.6 187.35<br />
3110.01<br />
12 5.22 Reinforcement for RCC work including straightening, cutting, bandings, placing in position &<br />
P-92 binding all complete.<br />
522.1 Mild steel & Medium Tensile steel bars<br />
kg<br />
158.72 41.5<br />
6586.88<br />
13 15.12<br />
P-227<br />
Dismantling doors, windows & clerestory windows (steel or wood) shutter including<br />
chowkhats, architrave, holdfasts, etc. complete & stacking within 50 m lead. each<br />
57 54.6<br />
3112.20<br />
15.12.1 Areas 3 sq. meters & below<br />
14 9.1<br />
P-136<br />
Providing wood work in frames doors, windows, clerestory windows & other frame, wrought<br />
framed & fixed in position.<br />
9.1.2 Sal Wood<br />
m 3 1.377 30511.9<br />
42014.89<br />
15 15.13 Taking out doors, windows, clerestory windows shutter<br />
P-227 (steel or woods) including stacking within 50 m lead.<br />
15.13.1 of areas 3 sq. meters & below<br />
each<br />
69 21.4<br />
1476.60<br />
16 18.48<br />
P-300<br />
Providing & placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701<br />
marked with cover & suitable locking arrangement & making necessary holes for inlet, outlet &<br />
overflow pipes but without fittings & the base support for tank<br />
liters.<br />
8000 5.25<br />
42000.00<br />
17 9.70<br />
P-146 Providing & fixing IS : 12817 marked stainless steel butt hinges screws complete.<br />
9.70.2 100 x 58 x 1.90 mm each 378 35.25 13324.50<br />
18 9.97<br />
P-149<br />
Providing & fixing aluminum tower bolts ISI marked anodised (anodic coating not less than<br />
grade AC 10 as per ISI:1868) transparent or dyed to required colour or shade with necessary<br />
9.97.1 250 x 10 mm each 51 62.2 3172.20<br />
9.97.3 200 x 10 mm each 36 52 1872.00<br />
<br />
19 9.96<br />
P-149<br />
Providing & fixing aluminum door bolts ISI marked anodised (anodic coating not less than<br />
grade AC 10 as per ISI : 1868) transparent or dyed to required colour or shade with necessary<br />
screws etc. complete each<br />
51 158.5<br />
8083.50<br />
20 9.100 Providing & fixing aluminum handles ISI, marked anodised (anodic coating not less than grade each 138 35.3 4871.40<br />
21 9.5<br />
P-136<br />
Providing & fixing panneled or panneled & glassed shutter for doors windows, & clerestory<br />
windows including ISI marked black enamelled MS butt hinges with necessary screws<br />
excluding panneling which will be paid for separately.<br />
9.5.2 Kiln seasoned & chemically treated Hollok Wood<br />
9.5.2.1 35 mm thick shutter m 2 27.6 899.7 24831.72<br />
3
22 13.48<br />
P-205<br />
Finishing wall with Deluxe Multi surface paint system for interiors & exteriors using Primer as<br />
per manufacturer specification :<br />
13.48.2 painting wood work with Deluxe Multi surface paint of required shade. Two or more coat<br />
applied @0.90/ 10 sqm over & under coat of primer applied @ 0.75/ 10 sqm of approved<br />
brand or manufacturer<br />
m 2 365.98 51.55<br />
18866.27<br />
23 9.48<br />
P-143<br />
Providing & fixing M.S. grill of required pattern in framed of windows etc. with M.S. flats,<br />
square or round bars etc. all complete<br />
9.48.2 Fixed to openings / wooden frames with rawl plug screws etc kg 1197.28 64.4 77104.83<br />
24 18.10 Providing & fixingG.I. pipe complete with G.I. fittings complete & clamps, including cutting &<br />
<br />
P-292 making good the wall.<br />
18.10.1 15 mm nominal bore m 40 105.85 4234.00<br />
18.10.2 20 mm nominal bore m 15 133.85 2007.75<br />
18.10.3 25 mm nominal bore m 10 179.65 1796.50<br />
18.10.5 40 mm nominal bore m 20 264.05 5281.00<br />
18.10.6 50 mm nominal bore m 20 342.9 6858.00<br />
25 17.1<br />
P-263<br />
Providing & F water closet squatting pan (<strong>India</strong>n type W.C. pan) with 100 mm sand cast iron<br />
P or S trap. 10 lt. low level white PVC flushing cistern with manually controlled device ( handle<br />
lever) conforming to I.S. 721, with all fitting & fixture complete including cutting & making<br />
good damages the wall & floors wherever required:<br />
17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with intrigal type foot<br />
rests.<br />
each<br />
7 2304.85<br />
16133.95<br />
26 17.24<br />
P-267<br />
Providing & fixing White Vitreous china squatting plate urinal with intrigral rim longitudinal<br />
flush pipe<br />
each<br />
4 1096.65<br />
4386.60<br />
27 17.7<br />
P-264<br />
Providing & fixing wash basin with CI brackets, 15 mm CP brass pillar taps, 32 mm CP brass<br />
waste of standard pattern, including painting of fittings & making good the walls wherever<br />
required:<br />
17.7.4 White Vitreous china flat wash basin size i.e. 550x400 mm with single 15 mm C.P brass<br />
pillar tap.<br />
each<br />
7 1044.9<br />
7314.30<br />
28 17.32<br />
P-267<br />
Providing & fixing mirror superior glass ( of approved quality) & of reqd.shape & size with<br />
plastic molded frame of approved make & shade with 6 mm thick hard board backing:<br />
17.32.1 Circular shape 450 mm dia each 7 599.15 4194.05<br />
29 Providing & fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP<br />
brass screw with concealed fittings arrangement of approved quality & colour: each<br />
17.73.2. 60 mm long towel rail total length of 496 mm, 78 mm wide & effective height of 88 mm,<br />
weighing not less than 190 grms<br />
7 329.5<br />
2306.50<br />
4
30 17.71<br />
P- 274<br />
Providing & fixing PTMT liquid soap container 109 mm wide, 125 mm height, 112 mm<br />
distance from the wall of standard shape with bracket of the same material with snap fittings<br />
of approved quality & colour weighing not less than 190 grms<br />
each<br />
7 164.65<br />
1152.55<br />
31 18.74<br />
P-305<br />
Providing & fixing unplasticised PVC connection pipe with PTMT nuts collar & bush of<br />
approved quality & colour:<br />
18.74.1 15 mm nominal bore with 30 cm length each 30 45.55 1366.50<br />
32 17.28<br />
P-267<br />
Providing & fixing PVC waste pipe for sink or wash basin including PVC waste fitting<br />
complete:<br />
17.28.2.1 32 mm dia each 14 46.8 655.20<br />
33 19.30<br />
P-322<br />
Constructing brick masonry chamber for underground C.I. inspection chamber & bends with<br />
75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) CI cover with<br />
frame light duty) 455 x 610 mm internal dimension, total weight of with frame to be not less<br />
19.30.3 Inside dimension 600 x 850 mm & 45 mm deep for single pipe line each 2 4068.5 8137.00<br />
34 13.62<br />
P-206<br />
Painting with synthetic enamel paint of approved brand & manufacture of required colour to<br />
give an even shade.<br />
13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of<br />
approved & manufacturer.<br />
m 2 188.06 51.3<br />
9647.48<br />
35 14.5 Renewing glass panes with putty & nails wherever necessary<br />
P-215<br />
14.5.1 Float glass panes of thickness of 4 mm m 2 57.12 427.6 24424.51<br />
36 9.117<br />
P-152<br />
Providing & fixing factory made UPVC door frame made of UPVC extruded section having an<br />
overall dimension as below (tolerance +/- 1mm) with wall thickness of 2.0 mm +/- 0.2 mm,<br />
corners of the door frame to be mitred & welded of plastic, galvanized brackets & stainless<br />
steel screws. The hinge side vertical of the frames reinforced by galvanized stainless steel<br />
hinges fixed to be the frame complete as per manufacturer pecification & direction of engineer<br />
in Charge.<br />
9.117.1 Extruded section profile size 48 x 40 mm m 30.4 141 4286.40<br />
5
37 9.118.2<br />
P-153<br />
30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles & rails of a<br />
UPVC hollow section of size 60 x 30 mm & wall thickness 2 mm +/- 0.2 mm with inbuilt<br />
decorative moulding edging on one side. The styles & rails mitred & joined at the corners by<br />
means of MS galvanized / plastic bracket of size 75 x 220 mm having wall thickness of 1.0<br />
mm & stainless steel screws. The styles of the shutter reinforced by inserting galvanized MS<br />
tube of size 25 x 20 mm & 1 mm +/- 0.1 mm wall thickness. The lock rail made up of H<br />
section a UPVC hollow section of sixe 100 x 30 mm & 2 mm +/- 0.2 mm wall thickness fixed<br />
to the shutter styles by means of plastic / galvanised MS U cleats. The shutter frame filled<br />
with a UPVC multi chamber single panel of size not less than 620 mm, having overall<br />
thickness of 20 mm & 1 mm +/- 0.1 mm wall thickness, the panels filled vertically & tie bar at<br />
two places by inserting horizontally 6 mm galvanised MS rod & fastened with nuts & washer,<br />
complete as per manufacturer specification & direction of engineer-in-Charge<br />
m 2 14.7 2271.8<br />
33395.46<br />
38 16.12<br />
P-241<br />
Dry brick pitching half thick in drains including supply of bricks & preparing the surface<br />
40 183.55<br />
complete m 2<br />
7342.00<br />
16.12.1 With FPS bricks of class designation 75<br />
39 4.1<br />
P-241<br />
Providing & laying in position cement concrete of specified grade<br />
excluding the cost of centering & shuttering -all work upto the plinth<br />
level:<br />
4.1.3 1:2:4 (1 cement:3 coarse sand: 4 graded stone aggregate m 3 16 3257.45 52119.20<br />
20 mm nominal size)<br />
40 11.3<br />
P-172<br />
Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 floating<br />
coat of neat cement including cement slurry, but excluding the cost<br />
of nosing of steps etc. complete.<br />
11.3.1. 40 mm thick with 20 mm nominal size stone aggregate m 2 128 192.95 24697.60<br />
41 22.14 Grading roof for water proofing treatment with:<br />
P-348<br />
22.14.2 Cement mortar 1:3 (1 cement 3 coarse sand m 3 13.48 5045.35 68011.32<br />
42 22.8<br />
P-347<br />
Providing & laying four courses water proofing treatment with bitumen felt over roof consisting<br />
of first & third courses of blown bitumen 85/25 or 95/15 conforming to IS : 702 applied hot@<br />
1.45 kg/sqm of area for each course, second course of roofing felt type 3 grade-I (hessain<br />
based self finished bitumen felt) and fourth & and final course of stone grit 6 mm & down size<br />
or pea sized gravel spread at 6 cubic dia/sqm including preparation of surface but excluding<br />
grading complete with:<br />
22.8.1 Bitumen felt (hessain based) type 3 grade Conforming to IS : 1322 m 3 384.2 184.8 71000.16<br />
6
43 22.8<br />
P-347<br />
Demolishing cement concrete manually by mechanical<br />
means including disposal of material within a 50 meters<br />
as per the direction of Engineer in Charge<br />
15.2.1 1:3:6 or richer mix m 3 16 368.48 5895.68<br />
44 6.4<br />
P-99<br />
Brick work with FPS bricks of class designation 75 in superstructure above plinth level upto<br />
floor V level in all shapes & sizes.<br />
6.4.1 Cement mortar 1:4 ( 1 cement : 4 coarse sand) m 3 5 2357.4 11787.00<br />
45 6.5<br />
P-99<br />
Extra for brick work in super structure above floor V level for each four floor or part thereof by<br />
mechanical means by lifting material using mobile crane<br />
m 3 5 190<br />
950.00<br />
46 13.5<br />
P-201 15 mm cement plaster on rough side or half brick wall of mix:<br />
13.5.2 1:6 ( 1 cement: 6 course sand) m 2 206 84.55 17417.30<br />
47 13.39<br />
P-204 Colour washing such as green, blue or buff to given an even shade:<br />
13.39.1 New work (two or more coat colour) with a base coat with cement prime m 2 206 9.3 1915.80<br />
48 17.4<br />
P-263<br />
Fixing white vitrioviding & fixing white vitreous china flat back or wall concern type lipped front<br />
urinal basin of 430x260x350 mm & 340x260x350 mm sizes respectively with automatic<br />
flushing cistern with standard flush pipe & CP brass spreader with brass brackets, cutting &<br />
making good the wall & floor as reqd..<br />
17.4.1 One urinal basin with 5 liter white PVC automatic flushing cistern. each 4 2018.7 8074.80<br />
49 2.10<br />
P-65 Excavation trenches of required width for pipes, cables, etc including excavation for sockets &<br />
dressing of sides ramming of bottoms, depth upto 1.5 m including getting out the excavated<br />
soil, and then returning the soil as required, in layer by ramming, watering, etc & depositing of<br />
surplus excavated soil as directed with in a lead of 50 mm:<br />
<br />
2.10.1 all kinds of soil<br />
2.10.1.2 Pipes cables etc exceeding 80 mm dia but not exceeding 300 mm dia m 25 115.05 2876.25<br />
50 19.1<br />
P-315 Providing laying & jointing glazed stoneware pipe grade A with stiff mixture of cement mortar<br />
in the proportion of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete<br />
19.1.1 100 mm diameter each 25 105.05 2626.25<br />
7
51 19.3<br />
P-315<br />
Providing laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone<br />
aggregate 40 mm nominal size) upto haunches of SW pipes including bed concrete as per<br />
standard design.<br />
19.3.1 100 mm dia S.W. pipe m 25 157.4 3935.00<br />
52 18.17 Providing & fixing gun metal gate valve with C.I. wheel of approved<br />
<br />
<br />
P-293 quality (screwed end)<br />
18.17.1 25 mm nominal bore each 7 285.5 1998.50<br />
18.17.4. 50 mm nominal bore each 1 578.2 578.20<br />
0.00<br />
53 18.19<br />
P-293<br />
Providing & fixing gun metal non return valve of approved quality (screwed end)<br />
18.19.4 50 mm nominal bore<br />
18.19.4. 1 Vertical each 1 847.2 847.20<br />
54 18.76 Cutting holes upto 30x30 cm in walls including making holes good the same<br />
P-305<br />
18.76.1 With FPS bricks each 100 90.9 9090.00<br />
55 18.78<br />
P-306<br />
Making chases upto 7.5x 7.5 cm in walls including making good & finishing with matching<br />
surface after housing G.I pipe etc.<br />
m<br />
120 36.65<br />
4398.00<br />
58 10.30<br />
P-163<br />
Providing & fixing in position collapsible steel shutter with vertical channels 20x10x2 mm &<br />
braced with flat iron diagonals 20x5 mm size with top & bottom rail of T iron 40x40x6 mm<br />
dia steel pulleys complete with bolts nuts locking arrangement stopper, handle, including<br />
applying primer coat of approved steel primer<br />
m 2 8.4 2592.7<br />
21778.68<br />
59 17.38.1<br />
P-268<br />
Providing & fixing bend of required degree with access door, insertion rubber washer 3 mm<br />
thick, bolts & nuts complete 100 mm<br />
Nos<br />
56 255<br />
14280.00<br />
60 17.41.1.1<br />
P-269<br />
Providing & fixing double equal junction of required degree with access door, insertion rubber<br />
washer 3 mm thick, bolts & nuts complete Sand cast iron S & S as per IS- 1729<br />
Nos<br />
12 513.85<br />
6166.20<br />
61 17.60.1<br />
P-272<br />
Providing & fixing trap of self cleansing design with screwed down or hinged grating with or<br />
without vent arm complete including cost of cutting & making good the wall & floors :<br />
100 mm inlet & 100 mm outlet.<br />
Nos<br />
7 544.3<br />
3810.10<br />
62 17.41.1.1<br />
P-269<br />
Providing & fixing double equal junction of required degree with access door, insertion rubber<br />
washer 3 mm thick, 100x100x100x100 mm<br />
Nos<br />
2 513<br />
1026.00<br />
8
63 10.11<br />
P-164<br />
Providing & fixing factory made ISI marked steel glassed doors, windows & ventilators<br />
side/top/centre hung with beading and all members such as K12B & K12 B etc. complete<br />
standard rolled steel sections, joints mitred & flash butt welded & sah bars tenoned & riveted<br />
with 15x3 mm lungs, 10 cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6<br />
(1cement :3 course sand : 6 graded stone aggregate 20 mm nominal size) or with wooden<br />
plugs & screws or rowel plugs & screws or with fixing clips of hinges or with bolts & nuts as<br />
required, including providing & fixing of hinges, pivots, float glass panes with glazing clips &<br />
special metal sash putty of approved makes & a priming coat of approved steel primer<br />
excluding the cost of metal beading & other fitting except necessary hinges or pivots complete<br />
as per approved design<br />
kg<br />
823 178.9<br />
147234.70<br />
64 17.37<br />
P-268<br />
Providing & fixing M.S holder bat clamps of approved design to Sand Cast iron/cast iron<br />
embadded in 7 including cement concrete blocks 10x10x10 cc of 1:2:4 mix (1 cement : 2<br />
course sand : 4 graded stone aggregate 20 mm nominal sizes) including cost of cutting holes<br />
& making good the walls etc.<br />
17.37.1 for 100 mm dia pipe Nos. 83 65.35 5424.05<br />
65 18.46 Providing & fixing G.I pipe including cutting & threading the pipe &<br />
<br />
P-299 making long screw ete complete (New work)<br />
18.46.1 15 mm dia nominal bore Nos 46 75.9 3491.40<br />
18.46.2 20 mm dia nominal bore Nos 55 96.8 5324.00<br />
18.46.3 25 mm dia nominal bore Nos 57 107.25 6113.25<br />
18.46.5 40 mm dia nominal bore Nos 70 123.55 8648.50<br />
18.46.6 50 mm dia nominal bore Nos 55 235.6 12958.00<br />
66 18.50 Providing & fixing C.P bras nose bib cock of approved quality conforming to IS standards &<br />
18.50.1 15 mm dia nominal bore Nos. 14 262.05 3668.70<br />
67 2.33<br />
P-68<br />
Felling trees of the grith (measured at a height of 1 m above ground level) including cutting of<br />
trunks & branches removing the roots & stacking of serviceable material & disposal of<br />
unserviceable material .<br />
2.33.1 Beyond 30 cm grith upto & including 60 cm grith Nos 77 81.7 6290.90<br />
68 19.19<br />
P-320<br />
Providing & fixing inposition pre cast R.C.C manhole cover & frame of required shape &<br />
approved quality.<br />
19.19.3.2 Circular shape 560 mm internal diameter Nos 4 1110.3 4441.20<br />
69 17.35 Providing & fixing soil, waste & vent pipe<br />
P-268<br />
17.35.1.1 Sand cast iron S&S pipe as per I.S. 1729 m 62.22 451 28061.22<br />
9
Total 1579338.96<br />
Add escalation@ 35.0 % (Memo No.14(2)/95- Works dated 17.07.08 552768.64<br />
TOTAL RUPEES 2132107.60<br />
10
NAME OF PROJECT: RENOVATION AT OLD CMS BUILDING CONVERTED TO NURSES TRAINING SCHOOL AT SEALDAH,<br />
KOLKATA<br />
NON DSR Items<br />
SL.No. DESCRIPTION OF WORK UNIT QTY RATE<br />
(Rs.)<br />
AMOUNT<br />
(Rs.)<br />
1<br />
Removal of rubbish earth etc. from the working site & disposal of thesame<br />
beyond the compound, in conformity with the Municipal Corporation Rule for<br />
such as disposal loading into truck & cleaning the site in all respect as per the<br />
direction of the Engineer in Charge.<br />
3.1 Hire charge of lorry/trip...................................Rs. 400.00<br />
3.3 3.2 Loading unloading of material/trip...........Rs.150.00<br />
trip 14 550.00 7700.00<br />
2 Renewing cournice ( with moulding but without floral or similar intricate<br />
patterns) including necessary masonry work and 12 mm thick cement plaster<br />
(4:1) complete<br />
Projection (400x4500) mm<br />
Depth 325 to 400 mm<br />
m 132 360.00 47520.00<br />
TOTAL Rs. 55220.00<br />
11
NAME OF PROJECT: RENOVATION AT OLD CMS BUILDING CONVERTED TO NURSES TRAINING SCHOOL AT SEALDAH, KOLKATA<br />
DSR 2007 Items<br />
SL.<br />
No.<br />
1<br />
Schedule/<br />
Pg No.<br />
WGPVC<br />
P-3<br />
DESCRIPTION OF WORK<br />
UNIT QTY RATE<br />
(Rs.)<br />
AMOUNT<br />
(Rs.)<br />
Point wiring in PVC conduit, with piano type switch,<br />
Wiring for light point/fan point/exhuast fan/ call bell point with1.5 sq.mm. Fr PVC insulated copper<br />
conductor single core cable in surface/ recessed PVC Conduit with piano switch, phenolic laminated sheet, Nos. 170 305.00 51850.00<br />
suitable size MS box & earthing the point 1.5 sq. mm. FR PVC insulated copper conductor single core<br />
cable etc. as required<br />
2<br />
3<br />
WGPVC<br />
P-4<br />
LPACCPT<br />
P-9<br />
Circuit/sub main wiring in PVC conduiteWiring for circuit/sub main/wiring alongwith earth wire the following<br />
sizes of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required:<br />
1.14.1 2x1.5 sq.mm. +1x2.5 sq.mm. earth wire m 190 71.00 13490.00<br />
1.14.2 2x2.5 sq.mm. +1x2.5 sq.mm. earth wire m 400 81.00 32400.00<br />
1.14.3 2x4 sq.mm. +1x4 sq.mm. earth wire m 80 97.00 7760.00<br />
1.14.4 4x6 sq.mm. + 2x6 sq.mm. earth wire m 50 207.00 10350.00<br />
S/F light plug point piano type accessories<br />
Supply & fixing metal box of 150 mix 75mmx60mm deep ( nominal size) on surface or recessed with<br />
suitable size phenolic laminated sheet in front including pf & f 3pin 15/16 amp. Socket outlet & 15/15 amp.<br />
piano type switch connection as required<br />
Nos 50.00 102.00 5100.00<br />
4<br />
PPACCPT<br />
P-9<br />
S/F power plug point piano type accessories<br />
Supply & fixing metal box of 150 mix 75mmx60mm deep ( nominal size) on surface or recessed<br />
with suitable size phenolic laminated sheet in front including pf & f 6pin 15/16 amp. Socket outlet & 15/15<br />
amp. piano type switch connection asrequired<br />
Nos 22.00 161.00 3542.00<br />
5<br />
CREB<br />
P-9<br />
S/F Ceiling Rose<br />
Supplying & fixing 3 pin 5 amp ceiling rose on the existing junction box / wooden block including connection Nos 170 19.00 3230.00<br />
as required<br />
6<br />
MODFREB<br />
P-8<br />
S/F modular type electronic fan regulator.<br />
Supply & fixing stepped type electronic fan regulator on the existing modular plate switch box excluding<br />
modular plate as required.<br />
Nos. 36 247.00 8892.00<br />
12
7<br />
SPMCBDB<br />
CO/ P-16<br />
Supplying & fixing following way single pole & nutural, sheet steel MCB distribution board, 240 Volt on<br />
surface / recessed complete with tinned copper bus ba rearthbar, din bar, detachable gland plate,<br />
interconnection, phospetis & powder painted including earthing etc. as required. (but without MCB / RCCB<br />
/ Isolator)<br />
2.32.3 2+8 way, single door Nos 10 654.00 6540.00<br />
8<br />
MCBC<br />
P-20 Supplying & fixing 5 amp. To 32 amps. Rating, 240 Volts 'C' series MCB suitable for iv\inductive load of<br />
following poles in the existing MCB DB complete with connection testing & commissioning as required<br />
Nos 64 94.00 6016.00<br />
9<br />
CADIS<br />
P-20<br />
Supplying & fixing following rating four pole 415 V insulators in the existing MCB DB complete with<br />
connection & commissioning as required 2.54.1 40 Amps<br />
Nos 10 166.00 1660.00<br />
10<br />
ITCFFDR<br />
P-11<br />
Installation, testing,& commissioning of prewired fluorescent fitting / compact fluorescent fitting of all types,<br />
complete with all accessories and tube etc. including supply & fixing ball & socket arrangement,2 no. down<br />
rod of 20 mm dia x 1.6 mm thick steel conduite upto 30 cm lem\ngth, painting & wiring the down rod and<br />
connection with 1.5 mm FR PVC insulated copper wire single core<br />
cable & earthing etc.<br />
Nos 63 126.00 7938.00<br />
11<br />
CARFAN<br />
P-12 Carriage of ceiling fan & regulator / exhaust fan from store to site as required<br />
Nos 36 10.00 360.00<br />
12<br />
EARPIPCH<br />
AR/P-23<br />
Earthing with GI earth pipe 4.5 m long, 40 mm dia including accessories, and providing masonry enclosure<br />
with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required.<br />
Set 2 1971.00 3942.00<br />
13<br />
EARGIST<br />
PIP/P-24<br />
Providing & fixing 25x5 mm G.I. strip in 40 mm dia G.i pipe from the earth electrode as required<br />
m 8 218.00 1744.00<br />
14<br />
EARBUS<br />
P-25<br />
Providing & fixing earth busbar of 50 mm x 5mm Aluminium strip on the surface for connection etc. as<br />
required<br />
m 1.50 665.00 997.50<br />
15<br />
PWTPMEB<br />
DB/ P-18<br />
Supplying & fixing following way three pole & nutural prewired & sheet steel, MCB distribution board, 415 V<br />
on surface /recess complete with loose wire box, terminal box, duly prewired with suitable size blocks,<br />
tinned copper busbar, nutral link, earth bar, detachable gland plate, reconnections,phospetised & powder<br />
painted including earthing etc. as required (But without MCB/RCCb/Isolators 4 Way (4+ 12), Single Door<br />
Nos 2 4834.00 9668.00<br />
13
16<br />
MCBTPIS<br />
P-20<br />
Supplying & fixing following rating 4 pole 415 V isolator in the existing MCB DB complete with connective<br />
testing & commissioning etc. as required<br />
2.55.2 63 amps<br />
Nos 2 362.00 724.00<br />
Total Sum of DSR Items (A) 176203.50<br />
Add escalation @ 35%(B) 61671.225<br />
Total Sum (A+B=C) 237874.73<br />
14
NAME OF PROJECT: RENOVATION AT OLD CMS BUILDING CONVERTED TO NURSES TRAINING SCHOOL AT SEALDAH, KOLKATA<br />
Non DSR Items<br />
SL.<br />
No.<br />
DESCRIPTION OF WORK UNIT QTY RATE<br />
(Rs.)<br />
AMOUNT<br />
(Rs.)<br />
1<br />
Providing fitting, fixing of fluorescent light fittings ( Make Phillips, of following Type)<br />
with supply of 1/2 Nos. as required 40 Watts tube light, 2 Nos. round block etc in<br />
the wall including end connection including the labor of cutting the housing of false<br />
ceiling.<br />
(I) TMC 100/136 NW 1x36W/TL40W Nos. 35 485.00 16975.00<br />
(II) TMC 501/136/HF (EBW) 1xTLD 36W Nos. 63 1136.00 71568.00<br />
2<br />
Providing street light luminate with single piece die cast alluminium housing POT<br />
optics reflector & acrylic cover ( Make : PHILIPS, Type SRP- 51/150. 1x SON t 150<br />
W) & fixing only outdoor street light type fluorescent or MV light fittings with all<br />
accessories to be fixed / projected from the wall of the building including making<br />
holes/ providing clamping arrangement & necessary GI reducers supply & fixing<br />
40mm (1.5" dia) dia G.I. pipe class -B medium quality 1.5m average length having<br />
suitable band supply & fixing necessary length of PVC wire & making connection<br />
as required & mending good damages to wall including painting.<br />
Nos. 3 7726.00 23178.00<br />
3<br />
Providing and fitting fixing of call bell of approved make including end connection<br />
Nos. 3 215.00 645.00<br />
4<br />
5<br />
Supply installation & commissioning of 2 H.P monoblock pump (Make : Kirloskar or<br />
approved brand Type: single phase, 1.5 KW, suction 50mm & delivery 40mm)<br />
including supply of installation & commissioning of direct on line starter (make :<br />
Havalls or equivalent Type: DO ;HE-1) including installation of suitable size M.S<br />
angle frame, !.5" check valve with electrical & plumbing connection.<br />
Providing fitting fixing of 12" dia exhaust fan of approved make (Make EPC or<br />
equivalent) of 920 RPM<br />
Nos. 1 11700.00 11700.00<br />
Nos. 9 2750.00 24750.00<br />
15
6<br />
Finishing end of the following cable by crimping method including supply & fixing<br />
dowells, solderless socket, tapes and joints materials:<br />
(a) 6 Sq.mm PVC Ai. Cable.<br />
Nos. 8 16.00 128.00<br />
7<br />
Supply & fixing of compression gland complete with brass gland, rubber ring, for<br />
dust & moister proof entry of PVC armoured cable as below : 2 core 6 sqm.<br />
(Rate derived from PWD schedule 2001, P-f-3/ lt-6 a)<br />
Nos. 8 22.70 181.60<br />
8<br />
9<br />
10<br />
Supplying & laying of the following size cable : 1.1 KV grade alluminium armoured<br />
cable (size: 6 sq.mm, 2 core) with alluminium conductor (I.P.) conforming I.S. 1554<br />
part 1/1982<br />
Providing, fitting fixing of 5 in 1/16 Amp combined switch socket (Anchor Make)<br />
including supply of base box & end connection.<br />
Fabrication of following size triple pole and nutral bus bar made with 16<br />
SWGCRCA sheet and required size copper bar and duly paint with two coats of<br />
red oxide and finish paint including irrection and end connection.<br />
(ii) 18" x 10" x 6" for 100A TPN bus bar<br />
m 25 162.00 4050.00<br />
Nos. 22 128.00 2816.00<br />
Nos. 1 2050.00 2050.00<br />
11<br />
12<br />
Providing, fitting, fixing of 48" dia ceiling fan of approved make including wiring the<br />
down rod of standard length (upto 30 cm) with 1.5 sq mm Fr PVC insulated copper<br />
conductor single core cable as required.<br />
Extra for suspension exceeding 25 cm with S& f additional 2 x 20 mm dia E.I.<br />
conduite (14 SWG) supports & necy. 1/1.40 twin flat or 2 x 1/1.40 PVC wire &<br />
painting (Rate derived from PWD schedule 2001, P-C-3/ lt-18<br />
Nos. 36 2059.00 74124.00<br />
m 60 86.00 5160.00<br />
13<br />
Providing, fitting, fixing of 63 Amp triple pole FSU, 415V, with nutral link, switch fuse<br />
unit mount on iron frame (TYPE : SRTE 4063, Make - Havalls) including<br />
commissioning & testing including fabrication of iron structure & grouting.<br />
Nos. 2 3150 6300.00<br />
16
14<br />
15<br />
16<br />
Providing, fitting, fixing of 100 Amp triple pole FSU, 415V, with nutral link, switch<br />
fuse unit mount on iron frame (TYPE : SRTE 4063, Make - Havalls) including<br />
commissioning & testing including fabrication of iron structure & grouting.<br />
Supply, Fabrication & making C.I. board made of 24 SWG C.O. sheet of minimum<br />
7" depth of following size glow sign board with channels etc. with front side open<br />
for fixing poly carbonate sheet including painting etc. as required. (Approved rate:<br />
Crash Progremme)<br />
Supplying & fitting 1.8 mm thick poly carbonate sheet including coloured lettering<br />
with venyl sheet. (Approved rate : Crash Progremme)<br />
Nos. 1 4200 4200.00<br />
sft. 70 160.00 11200.00<br />
sft. 70 196.00 13720.00<br />
17 Supplying & fixing 4'-0" 40 watt fluorescent tube light fitting with Philips make fuse<br />
choke & starter including connection with 2x1.5 sq.mm. wire etc. as required<br />
Nos 20 340 6800.00<br />
Total Sum for Non-DSR Items 279545.60<br />
Total Sum ,Say 279546<br />
17