Cardholder for Mounting Circuit Boards for Euro Card - Bosch Rexroth
Cardholder for Mounting Circuit Boards for Euro Card - Bosch Rexroth
Cardholder for Mounting Circuit Boards for Euro Card - Bosch Rexroth
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Electric Drives<br />
and Controls<br />
Hydraulics<br />
Linear Motion and<br />
Assembly Technologies Pneumatics Service<br />
<strong><strong>Card</strong>holder</strong> <strong>for</strong> <strong>Mounting</strong><br />
<strong>Circuit</strong> <strong>Boards</strong> <strong>for</strong> <strong>Euro</strong> <strong>Card</strong><br />
RA 30108/11.03<br />
1/4<br />
Model CH64-G<br />
Series 1X<br />
Table of contents<br />
Features<br />
Contents Page – Fastens to 35mm DIN rail or directly screws to panel<br />
Ordering details ......................................................................................... 2<br />
Technical data............................................................................................ 2<br />
Unit dimensions ......................................................................................... 3<br />
– Loose adapter included <strong>for</strong> DIN rail mounting to<br />
mount horizontally or vertically<br />
– Sturdy base and card guide assembly<br />
– <strong>Circuit</strong> board hold downs<br />
– Ejector buttons release card smoothly<br />
– Compression screw terminals <strong>for</strong> wire connections<br />
– Terminal connections on both sides of the cardholder<br />
– Fits <strong>Bosch</strong> <strong>Rexroth</strong> 64-pin type G plug-in <strong>Euro</strong> card<br />
<strong>for</strong>mat cards<br />
<strong><strong>Card</strong>holder</strong> CH64-G is a 64-pin single card holder <strong>for</strong> mounting<br />
<strong>Euro</strong> cards (per DIN 41612, type G).<br />
The card is secured by hold downs to prevent disconnection due<br />
to vibration. Both ejector buttons should be pushed to release<br />
the card. The cardholder may be mounted on DIN rail or screwed<br />
down (panel mount).
2/14 <strong>Bosch</strong> <strong>Rexroth</strong> Corp. | Industrial Hydraulics Model VT-VSPA2-1-2X | RA 30 110/06.05<br />
<strong>Card</strong> installation and removal<br />
Push both ejector buttons down to prepare the hold down levers. Inserting card will close hold downs. To remove card,<br />
depress both red ejector buttons.<br />
Ordering details<br />
CH – 64G – PH – 1X<br />
<strong><strong>Card</strong>holder</strong><br />
= CH<br />
1X = Series 10 to 19<br />
Mating connector<br />
per IEC 603/DIN 41612<br />
64 contacts, type G = 64G<br />
PH =<br />
Style<br />
Technical data<br />
Mating connector, female epr DIN41612 Type G:<br />
CH64-G 64 contacts (rows z, b, d & f 2-32 even)<br />
<strong>Mounting</strong>:<br />
– Guiderail 35 mm (1.38 in) horizontal or vertical (NS35/7.5)<br />
– M4 x 30mm (6-32 x 1-1/4") screws, hole diameter 4.2 mm<br />
(0.17 in). Tightening torque 0.5 Nm<br />
Technical data:<br />
– Conection according to standard IEC/DIN VDE<br />
– Nominal current In 1A<br />
– Nominal voltage Un 250V<br />
– Stripping length 8 mm (0.35 in)<br />
Connection data in AWG (mm 2 ):<br />
Minimum conductor cross section rigid 0.2 (24)<br />
Maximum conductor cross section rigid 4.0 (12)<br />
Minimum conductor cross section fl exible 0.2 (24)<br />
Maximum conductor cross section fl exible 2.5 (14)<br />
Recommended box depth with card inserted:<br />
225 mm (9 in) or larger<br />
Weight in kg (lbs):<br />
CH64 type G 0.34 (0.75)
RA 30 110/06.05 | Model VT-VSPA2-1-2X Industrial Hydraulics | <strong>Bosch</strong> <strong>Rexroth</strong> Corp. 3/14<br />
Unit dimensions: – dimensions in millimeters (inches)<br />
CH64-G<br />
z<br />
b<br />
2<br />
z b d f<br />
d<br />
1<br />
z<br />
b<br />
d<br />
f<br />
209 (8.24)<br />
197 (7.76)<br />
184 (7.28)<br />
162 (6.38)<br />
118 (4.6)<br />
111 (4.37)<br />
1<br />
4.2 (.17)<br />
55 (2.17)<br />
1 Ejector Buttons<br />
66 (2.60)<br />
* Adapter <strong>for</strong><br />
DIN rail<br />
mounting<br />
Bottom View<br />
May be rotated 90° on rail<br />
5 (.20)<br />
Adapter <strong>for</strong><br />
DIN rail mounting<br />
(supplied<br />
unassembled)<br />
* Adapter <strong>for</strong> DIN rail mounting is supplied unassembled with<br />
mounting hardware.
<strong>Bosch</strong> <strong>Rexroth</strong> Corp. | Industrial Hydraulics 4WRP ..EA.. | RA 29020/01.05<br />
Notes<br />
<strong>Bosch</strong> <strong>Rexroth</strong> Corp.<br />
Industrial Hydraulics<br />
2315 City Line Road<br />
Bethlehem, PA 18017-2131<br />
USA<br />
Telephone (610) 694-8300<br />
Facsimile (610) 694-8467<br />
www.boschrexroth-us.com<br />
© 2004 <strong>Bosch</strong> <strong>Rexroth</strong> Corporation<br />
All rights reserved. Neither this document nor any part of it may be reproduced,<br />
duplicated circulated or disseminated, whether by copy, electronic <strong>for</strong>mat or<br />
any other means, without the prior consent and authorization of <strong>Bosch</strong> <strong>Rexroth</strong><br />
Cor po ra tion.<br />
The data and illustrations in this brochure/data sheet are intended only to<br />
describe or depict the products. No representation or warranty, either express<br />
or implied, relating to merchantability or fi tness <strong>for</strong> intended use, is given or<br />
intended by virtue of the in<strong>for</strong>mation contained in this brochure/data sheet. The<br />
in<strong>for</strong>mation contained in this brochure/data sheet in no way relieves the user of it<br />
obligation to insure the proper use of the products <strong>for</strong> a specifi c use or application.<br />
All products contained in this brochure/data sheet are subject to normal<br />
wear and tear from usage.<br />
Subject to change.