aquadere® aquadere® stick - Soprema
aquadere® aquadere® stick - Soprema
aquadere® aquadere® stick - Soprema
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Bituminous waterproofing solutions<br />
primer<br />
substrate<br />
aquadere ® solvent-free<br />
&<br />
aquadere ®<br />
<strong>stick</strong>
+<br />
Aquadere<br />
aquadere &<br />
aquadere <strong>stick</strong><br />
n Solvent free<br />
n No carrying issue<br />
n Not flammable<br />
n Easy to apply<br />
n Perfect adherence<br />
to the support<br />
n Easy management of waste<br />
n Tools can be clean with water<br />
Aquadere ®<br />
® is a ready-to-use cold-applied bitumen emulsion primer<br />
(solvent free). Aquadere ® is used as cold-applied primer, to increase<br />
adherence for bitumen-based waterproofing membranes. It’s also used as<br />
a bituminous coating for buried walls and foundations.<br />
Aquadere ® Stick<br />
Installation: Aquadere or Aquadere Stick in 3 steps<br />
Apply a sufficient quantity of Aquadère ® or Aquadère ® Stick on the surface, approximately:<br />
0.250 l/m² to 0.350 l/m² (depending on substrate).<br />
Aquadere ® Stick is a ready-to-use cold-applied bitumen emulsion<br />
primer (solvent free). Aquadere ® Stick is specially used for self-adhesive<br />
waterproofing membranes.<br />
Export Department Communication service DC-13/065_EN replace DC-10/093-EN<br />
1 2 3<br />
Surface must be clean<br />
without rust.<br />
Use flam if required or mechanical methods.<br />
Product must be applied with a brush or<br />
roller or sprayed onto dry, clean surfaces,<br />
free of non-adhesive materials.<br />
Metal surfaces must be degreased beforehand.<br />
Aquadere ® or Aquadere ® <strong>stick</strong><br />
must be well mixed to obtain a proper<br />
homogenization of components.<br />
Ensure that the tools are clean and free<br />
of any substances that may hinder the<br />
emulsion process.<br />
Apply the product removing air bubbles<br />
and wrinkles with a roller or a brush.<br />
Do not wet the surface until product<br />
is not completely dry. Product must be dry<br />
before applying waterproofing membranes.<br />
Visual inspection: Aquadere ®<br />
or Aquadere ® <strong>stick</strong> form a perfect black<br />
film finish. The presence of brown traces<br />
shows incomplete drying.<br />
Approximate consumption:<br />
On rough and absorbent substrate (i.e. concrete, wood):<br />
5 L can covers about 20 m², 25 L can covers about 100 m².<br />
On smooth, non-absorbent substrate (i.e. metal), the approximate<br />
consumption may be lower.<br />
1 x<br />
1 x<br />
0.20<br />
0.25<br />
l/m 2 l/m 2<br />
Average drying time on concrete substrate<br />
3h<br />
2h30<br />
2h<br />
1h30<br />
1h<br />
0h30<br />
Summer<br />
Winter<br />
5-10 min 30-45 min 1 hour 2 - 3 hours<br />
Metal<br />
Wood<br />
Concrete<br />
Dry weather<br />
Wet weather<br />
SOPREMA GROUP at your service<br />
Looking for a sales contact in oder to discuss a future project or a project<br />
that is under way? Any questions about the implementation of our product range?<br />
Contact <strong>Soprema</strong> Export Department<br />
Tel.: +33 (0)3 88 79 84 84 - Fax: +33 (0)3 88 79 84 85<br />
Email: export@soprema.com Find all the information on www.soprema.com<br />
e-mail: contact@soprema.com - www.soprema.com<br />
SOPREMA GROUP - 14 rue de Saint-Nazaire - CS 60121 - 67025 STRASBOURG Cedex - FRANCE - Tel: +33 3 88 79 84 00 - Fax: +33 3 88 79 84 01SOPREMA SAS with a Capital of 50,000,000 e- Headquarters: 14 RUE DE SAINT-NAZAIRE - 67100 STRASBOURG - Post code:<br />
CS 60121 67025 STRASBOURG CEDEX - RCS STRASBOURG: 314 527 557 - Due to the continuous evolution of the SOPREMA product range, please consult our Technical Data Sheets for exact and up to date specific technical information - SOPREMA reserves the right to modify<br />
the composition and conditions of use of its materials and their price without warning, depending on developments in know-how and technology. Orders will be accepted only on the conditions and according to the specifications in force on the date when the order is received.