New SunWize Grid-Tie Systems

Battery Chargers
Battery Chargers
SENS NRG Battery Charger system
Stored Energy Systems (SENS)
NRG Battery Charger
SENS’ NRG offers high accuracy, outstanding dependability and unmatched field configurability.
NRG instantly adapts to any common lead-acid battery. NRG is simple to install and when used
with a large battery creates a reliable non-stop DC power system for low current loads. Automatically
adjusts its output to meet constantly changing battery needs.
Should battery problems ever occur, the exclusive Battery SENS system cuts downtime and field
service expense. By detecting battery problems like high resistance cables and open battery cells,
service personnel can be sent to the site before commercial power outage causes a crisis.
UL, cUL, CE listed. 3-year warranty.
Features include:
• All-electronic operation with generous component de-rating
• Disconnected/reversed/incorrect voltage battery alarm and protection
• Protection of connected equipment against load dump transients
• Over temperature protection • Superior lightning and voltage transient protection
• Demonstrated field MTBF >1 million hours • Wide operating temperature range: -25°C to +50°C
Part # Model Output Output Input Dimensions Weight
Voltage (Vdc) Current (Adc) Voltage (Vac) (W x L x H)
350011 NRG-22-10-RC 24/12 10 110 – 120 / 208 – 240 6.5 x 12.5 x 5.6 24
350037 NRG-22-20-RC 24/12 20 110 – 120 / 208 – 240 13.1 x 13.9 x 7.4 42
Xantrex TRUECHARGE2
Schneider Electric (Xantrex)
Truecharge 10/10TB and TRUECHARGE2 battery chargers
Truecharge battery chargers feature wide AC input voltage range (90-135 VAC), adjustable
temperature compensation and independent settings prevent battery damage due to overcharging
and also help extend the life of expensive batteries. Microprocessor controlled, multistage charging,
10 amp DC output. 1-year warranty.
Protection Features:
• Over-temperature and overload protection • Ignition protected (10TB) • Transformer isolated for
safety • Reverse polarity protection • Short-circuit and surge protection
TRUECHARGE2 battery chargers feature low electrical interference and efficient, power factor corrected multistage charging.
Designed primarily for marine and commercial applications worldwide, TRUECHARGE2 battery chargers are available in three 12-volt
models versatile enough to be used in a wide variety of conditions and locations. Settings for flooded, gel, AGM or lead-calcium
batteries. Installation is facilitated by AC and DC wiring compartments and reverse-polarity battery protection. An optional remote
display panel and battery temperature sensor is available. 2-year warranty.
Features include: • 12 volt models available in 20A, 40A and 60A • Battery-equalization feature • Microprocessor-controlled,
multistage charging algorithms • Settings for two and three-stage charging • Temperature-compensated charging • Power factor
corrected for efficient charging • Ability to charge ‘dead’ batteries • Auto-ranging AC input voltage capability (90 – 265 volts AC)
Protection Features:
• Reverse battery polarity • Over and under-temperature, • DC over-voltage • Battery overcharging • Ignition, drip-proof design
Part # Model Output Vdc Output Amps Input Vac Dimensions Weight
350010TC10 804-0100 Truecharge 10 13.8 - 14.8 10 90-135 9.0 x 6.5 x 2.8 3.0
350010TC10TB 804-0111 Truecharge 10TB 13.1 - 14.2 10 90-135 15.1 x 6.7 x 2.8 3.0
350041 804-1240 TRUECHARGE2 – 20A 14.2 -15.5 20 90-265 9.8 x 6.7 x 2.8 4.8
350047 804-1220 TRUECHARGE2 – 40A 14.2 -15.5 40 90-265 9.8 x 6.7 x 2.8 4.8
350050 804-1260 TRUECHARGE2 – 60A 14.2 -15.5 60 90-265 13.4 x 6.7 x 3.5 4.8
Xantrex Truecharge Accessories
350055 808-0232-01 - Battery Temperature Sensor (BTS)
94