New SunWize Grid-Tie Systems

Inverters
OutBack Power Systems
Grid Interactive Inverters
GTFX and GVFX inverters provide automatic backup power when utility outages occur. The FX
inverter from OutBack Power has established itself in the off-grid world. Now they bring their
expertise to the multi-purpose grid-tie market place with the GTFX and the GVFX models that provide
automatic back-up power when utility outages occur. The GTFX is sealed and includes a turbo fan kit.
GVFX models are vented and have no fan. Use of an MPPT controller such as the OutBack’s MX60
will greatly increase the energy harvested from the PV array. Maximum of two GTFX or GVFX inverters
can be connected in series for 240 Vac split phase output. All models are ETL listed to UL-1741.
5-year warranty. Extended warranty available direct from manufacturer.
VFX Inverter
VFX Inverter, cover removed
FX Series Inverters
OutBack Power’s line-up of inverters has grown considerably over the past few years. Now six
different power levels are offered at a variety of voltages ranging from 12 to 48 Vdc. All FX inverters
offer pure sinewave output, a high current battery charger and AC transfer switch. Multiple pairs of
FX inverters can be connected together (using HUB) configured for 220/240 Vac split phase output
(using MATE) for a maximum of 10 inverters. Three FX inverters can be connected in parallel for
120 Vac single phase output or configured for 208 Vac three-phase output. All models have a single
60 Amp AC input and transfer relay. The gasketed die-cast aluminum chassis protects and keeps the
power conversion components cool. Sealed units are water proof to IEC529 IP65 standards and have
an operational temperature range of -40ºC to -60ºC. FX sealed inverters include external TURBO
cooling system. “Bug-proof” vented version has stainless steel screens to protect the air intake
and internal fan. The air inlet comes with a removable, washable foam filter insert. FX inverters are
compatible with OutBack FLEXware enclosures and racks. Available in 120 Vac/60 Hz single phase,
230 Vac/50 Hz versions and mobile versions with built-in AC neutral/ground switching system. FX
series can surge two times their power rating. Call for more information.
Part # Model Peak DC Voltage Continuous Charger Dimensions Shipping
Efficiency% Input Power (Watts) Current (Amps) Weight
Inverters
Sealed
715120 GTFX2524 91 24 2500 55 16.3 x 8.3 x 9.7 67
715122 GTFX3048 91 (CEC) 48 3000 35 16.3 x 8.3 x 9.7 67
715029 FX2012T 90 12 2000 80 16.3 x 8.3 x 13 67
715152 FX2524T 92 24 2500 55 16.3 x 8.3 x 13 67
715153 FX3048T 93 48 3000 35 16.3 x 8.3 x 13 67
Vented
715121 GVFX3524 91 24 3500 85 16.3 x 8.3 x 9.7 62
715123 GVFX3648 91 (CEC) 48 3600 45 16.3 x 8.3 x 9.7 62
715096 VFX2812 90 12 2800 125 16.3 x 8.3 x 12 64
715097 VFX3524 92 24 3500 85 16.3 x 8.3 x 12 64
715098 VFX3648 93 48 3600 45 16.3 x 8.3 x 12 64
Sealed – 230Vac/50Hz
715137 FX2012ET 90 12 2000 100 16.3 x 8.3 x 13 67
715037 FX2024ET 92 24 2000 55 16.3 x 8.3 x 13 67
715105 FX2348ET 93 48 2300 35 16.3 x 8.3 x 13 67
Vented – 230Vac/50Hz
715061 VFX2612E 90 12 2600 120 16.3 x 8.3 x 12 64
715127 VFX3048E 92 24 3000 85 16.3 x 8.3 x 12 64
715132 VFX3024E 93 48 3000 45 16.3 x 8.3 x 12 64
OutBack HUB System
OutBack Inverter Accessories
HUB System Communications Managers
The HUB system communications managers are the backbone of your networked OutBack power
conversion system. The OutBack HUB communicates stacking, load share and power save off/on
signals. Interconnection cabling is standard Ethernet CAT5 with RJ45 modular jacks. Through the
use of a HUB, your system is completely coordinated and managed by the MATE. HUB4 allows four
combined inputs of inverter with charge controllers, HUB10 permits up to 10 combined inputs.
66