New SunWize Grid-Tie Systems

Module Mounts
Zomeworks
Universal Track Rack
Tracking can increase electrical output of modules by 25% over that of a fixed rack. The sun’s
heat moves liquid from side to side, allowing gravity to turn the Track Rack and follow the sun.
Tracking mounts are cost-effective components for domestic and industrial PV power systems, utility
applications and water pumping and cathodic protection systems. The UTR comes in 6 standard
sizes for holding 2 to 16 modules and accommodates most PV modules. The numeric values in each
model number refer to the square feet of module space on that rack (i.e. UTRK040 has 40 sq. ft. of
module space). All Zomeworks racks are guaranteed for 10 years.
Universal Track Rack
SunWize Grid-Tie Systems
Zomeworks Model: UTR-020 Model UTRK-040 Model UTRF-64 Model UTRF-90 Model UTRF-120 Model UTRF-168 Model
Pole Size: 2.5” 3” 6” 6” 6” 8”
SW Part # 951TRU020UNITRA 951UNITRU040 954UTRF64 954UTRF90 951UTRF120 951UTRF168
Module Mounts
Kaneka 60 1 2-3 4-6 8 10*-12* 14**-16**
Mitsubishi 125 1 2-3 4-6 8 10 12-14
Mitsubishi 175/180 N/A 2 3-4 5*-6* 8* 10
SANYO HIP-190/195/200 1 2-3 4 6 8 9*-10-12H
SANYO N -205/210/215 1 2-3 4 6 8 10
SANYO HIT Double
Call for details
Sharp 80 1-2 3-4-5 6-8 10-12 14-16 18*-20*-21*-22*-24*
Sharp 130 1 2-3 4-6* 8 10 12-14*-15*
Sharp 170/175 1 2 3-4 6 8 9*-10
Sharp 208/216/224 1 2 3 4 6 8-9*
Yingli 80/85 1-2 3-4-5 6-8 10-12 14-16 18*-20*-21*-22*-24*
SunWize SW50A/55A/60A 1-2 3-4-5 NA NA NA NA
SunWize SW85/90/90C/95C/100C 1-2 3-4 6* 8-9* 10-12 14-15*-16*
SunWize SW110 2 4 6 10 12 16, 18*
SunWize 175/180 1 2 4 6 8 12
SOLON Blue 220 1 2 3 4-5* 6* 8-9*
* Denotes extra rail set is required. 951UTRF_RAILS, Extra rail set, specify either: 64, 90, 120 or 168
S-5! Solar Mount
S-5-Z mini and S-5-U mini clamps (l to r)
PV Anchor Kit
S-5!
S-5! clamps attach to the panel seam of standing seam metal roofing by the tightening of two
“bullet-nosed” stainless steel setscrews against the seam material. The round point setscrews
compress the seam material against the opposite wall of the clamp. They will “dimple” the seam
material, but will not penetrate it. Threaded holes in the clamp (stainless hardware is provided)
enable the easy attachment of various ancillary structural items to the clamps. S-5! clamps can be
used to attach mounting rails to standing seam roofs.
The S-5-PV Kit mounts to any of the S-5! Mini clamps (sold separately) and can be used to
mount modules directly to the roof without rails. The S-5-PV Kit also comes in a version for edge
applications where one clamp arm is broken off and a flange nut is added for the edge condition.
The S-5! VersaBracket is a penetrating attachment that can be used to mount virtually anything
to a face-fastened (non-standing seam) metal roof system. It is compatible with almost any
trapezoidal, face-fastened profile. The VersaBracket comes with factory-applied sealant
already in the base for a water-tight attachment. Mounting hardware is not provided.
Part # Model Item Weight
704018 S-5-U Metal Roof Clamp-Universal, 10mm Bolt 0.46
704045 S-5-U mini Metal Roof Clamp- 8mm Bolt 0.18
950029 S-5-Z Metal Roof Clamp-Bulb Seam, 10mm Bolt 0.58
704072 S-5-Z mini Metal Roof Clamp-Bulb Seam, 8mm Bolt 0.56
704063 PV Anchor Kit PV Grab 41-60mm w/8mm Stud, Flange Nut & Disc 0.18
951058 PV Anchor Kit (edge) PV Grab 41-60mm w/8mm Stud, Flange Nut & Disc 0.20
704066 Versabracket 3 Mounting Holes, Slotted Flange, 1.86” Height 0.16
SunWize Grid-Tie Systems
SunWize Grid-Tie Systems
SunWize Grid-Tie Systems
40