New SunWize Grid-Tie Systems

Switchgear
FW1000-DC
Enclosure allows wiring the DC side of three or four FX series inverters. Unit has 11 spaces for
3/4” wide PNL breakers, nine 1” wide spaces for 100A breakers or six 1.5” wide spaces for 175A -
250A breakers and supports up to eight terminal bus bars and up to three shunt assemblies.
Includes: Ground bus bar, 1000 Amp DC shunt assembly, positive bus, breaker mounting
hardware, enclosure mounting hardware, two FW-SBUS and one FW breaker bus.
Unit size - inches (H x W x D) = 38.5 x 11.4 x 12.1
FLEXware Mounting Panel FW - MP
Integrates OutBack FX series inverters to FLEXware 500 & 1000 enclosures A one-piece, silver
powder-coated aluminum plate, one needed for mounting FW500 and two FW1000 enclosures.
Unit size - inches (H x W x D) = 20.3 x 46.3 x 0.8
Switchgear
FLEXware Surge Protector
FW-SP-ACA
The FLEXware Surge Protector was designed specifically for OutBack FX Series Inverter/Chargers
(required for GVFX, GTFX models). The FW-SP-ACA replaces the FW-ACA (AC Conduit Adapter)
for FW500 & FW1000 systems and provides multiple levels of protection in the event of an
electrical surge or nearby lightning strike. The sophisticated design allows for both AC and DC
protection on multiple circuits (two AC and one DC) via thermally fused Metal Oxide Varistors
(MOVs). LED visual indicators provide at-a-glance status monitoring allowing system users to
determine operational status in real-time. The FW-SP-ACA is designed to operate between 120-
240 Vac at 50/60 Hz and 12-48 Vdc.
FW-MP Mounting Panel
Part # Model Item Shipping Size Weight
715198 FW 250 Enclosure - AC/DC, Single FX 9.8 x 8.4 x 11.6 5
715186 FW 500-AC Enclosure - AC, Dual FX 14.5 x 13.4 x 20.3 15
715187 FW 500-DC Enclosure - DC, Dual FX 14.5 x 13.4 x 20.3 15
715188 FW1000-AC Enclosure - AC, 3 - 4 FX 14.5 x 13.6 x 40.8 21
715189 FW1000-DC Enclosure - DC, 3 - 4 FX 14.5 x 13.6 x 40.8 21
715190 FW-MP Mounting Panel - one FW500 1.2 x 22.9 x 48.4 14
715065 FW-ACA AC Conduit Adaptor - FX series – 2
715066 DCA DC Conduit Adaptor - FX series – 27
15213 FW-SP-ACA Surge Protector AC/DC - for FW500 and FW1000 8.5 x 6.75 x 2.5 2.2
715220 FW-SP-250 Surge protector for FLEXware250 5.5 x 6.5 x 7.5 2.0
FW Surge Protector
FLEXware AC Input/Output-Bypass Assemblies FW-IOB
Field installable kit for bypassing the inverter, connecting the AC (utility or generator) input to the
AC (load) output, for inverter maintenance. Also provides required over-current protection. FW-IOB
assemblies include all of the circuit breakers and interconnect wiring needed for installation into
FLEXware AC enclosures.
For FLEXware 250
FW-IOB-S-120Vac Includes: Three 60A 120 Vac single pole PANEL mount breakers, sliding
bypass interlock plate, wire and hardware. System Rating: Bypass Input/Output Breaker - Single-
Phase 120 Vac One Pole @ 60 Amps 7.2 kW.
FW-IOB-S-230Vac Includes: Three 30A 230 Vac single pole PANEL mount breakers, sliding
bypass interlock plate, wire and hardware kit. System Rating: Bypass Input/Output Breaker -
Single-Phase 230 Vac One Pole @ 30 Amps 6.9 kW.
FW ACA Conduit Adaptor
For FLEXware 500
FW-IOB-D-120Vac Includes: Four 60A 120 Vac single pole DIN mount breakers, one 60A 120 Vac dual pole DIN mount breaker,
sliding bypass interlock plate, wire and hardware kit.
System Rating: Bypass Input/Output Breaker - Single-Phase 120 Vac Two Poles @ 60 Amps 14.4 kW.
FW-IOB-D-120/240Vac Includes: Six 60A 120 Vac single pole DIN mount breakers, sliding bypass interlock plate, wire and hardware
kit. System Rating: Bypass Input/Output Breaker - Split Phase 120/240 Vac Two Poles @ 60 Amps 14.4 kW.
FW-IOB-D-230Vac Includes: Six 30A 230VAC single pole DIN mount breakers, sliding bypass interlock plate, wire and hardware kit.
System Rating: Bypass Input/Output Breaker - Single-Phase 230 Vac Two Poles @ 30 Amps 13.8 kW.
110