Brocade® DCX, DCX 8510-8, DCX-4S and DCX 8510-4 Backbones ...

More documents

Recommendations

Info

Figure 1 and Figure 2 illustrate representative configurations of the DCX and DCX 8510 cryptographic modules. These are not the only possible configurations. Other possible configurations can be created by utilizing the blade and support matrix information in Table 4 and Table 5. Figure 1 DCX-4S and DCX Brocade Communications FOS 7.0.0b or FOS 7.0.0b1 DCX Security Policy v2.0 8
Figure 2 DCX 8510-4 and DCX 8510-8 Figure 3 and Figure 4 illustrate the Brocade 6510 and Brocade 7800 cryptographic modules, Figure 3 Brocade 6510 Figure 4 Brocade 7800 Brocade Communications FOS 7.0.0b or FOS 7.0.0b1 DCX Security Policy v2.0 9
Page 1 and 2: Brocade® DCX, DCX 8510-8, DCX-4S a
Page 3 and 4: Table of Tables Table 1 Firmware Ve
Page 5 and 6: ` DCX Backbone Part Number Brief De
Page 7: The name of a backbone-based valida
Page 11 and 12: Diffie-Hellman (DH) with 1024 bit o
Page 13 and 14: 4. Ports and Interfaces The cryptog
Page 15 and 16: 5. Identification and Authenticatio
Page 17 and 18: 6. Access Control Policy Roles and
Page 19 and 20: DH Public Key FCAP Public Key TLS P
Page 21 and 22: 11. Definitions and Acronyms 10 GbE
Page 23 and 24: Appendix A: Tamper Label Applicatio
Page 25 and 26: Apply seven seals are to the non-po
Page 27 and 28: Brocade DCX-4S and DCX 8510-4 Backb
Page 29 and 30: Brocade 6510 Two tamper evident sea
Page 31 and 32: Brocade 7800 Two tamper evident sea

Brocade® DCX, DCX 8510-8, DCX-4S and DCX 8510-4 Backbones ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?