Brocade® DCX, DCX 8510-8, DCX-4S and DCX 8510-4 Backbones ...

More documents

Recommendations

Info

Figure 9 Brocade DCX and DCX 8510-8 Backbone stainless steel handle seal application Figure 10 Brocade DCX and DCX 8510-8 Backbone filler panel seal application Brocade Communications FOS 7.0.0b or FOS 7.0.0b1 DCX Security Policy v2.0 26
Brocade DCX-4S and DCX 8510-4 Backbone Nineteen tamper evident seals are required to complete the physical security requirements. Apply fourteen seals are to the port side of the chassis Figure 11 Brocade DCX-4S and DCX 8510-4 Backbone port side seal locations Apply five seals are to the non-port side of the chassis Brocade Communications FOS 7.0.0b or FOS 7.0.0b1 DCX Security Policy v2.0 27
Page 1 and 2: Brocade® DCX, DCX 8510-8, DCX-4S a
Page 3 and 4: Table of Tables Table 1 Firmware Ve
Page 5 and 6: ` DCX Backbone Part Number Brief De
Page 7 and 8: The name of a backbone-based valida
Page 9 and 10: Figure 2 DCX 8510-4 and DCX 8510-8
Page 11 and 12: Diffie-Hellman (DH) with 1024 bit o
Page 13 and 14: 4. Ports and Interfaces The cryptog
Page 15 and 16: 5. Identification and Authenticatio
Page 17 and 18: 6. Access Control Policy Roles and
Page 19 and 20: DH Public Key FCAP Public Key TLS P
Page 21 and 22: 11. Definitions and Acronyms 10 GbE
Page 23 and 24: Appendix A: Tamper Label Applicatio
Page 25: Apply seven seals are to the non-po
Page 29 and 30: Brocade 6510 Two tamper evident sea
Page 31 and 32: Brocade 7800 Two tamper evident sea

Brocade® DCX, DCX 8510-8, DCX-4S and DCX 8510-4 Backbones ...

Create successful ePaper yourself

Delete template?

Save as template?