Plate heat exchangers - Behncke GmbH

More documents

Recommendations

Info

2 Pressure filter up to 2.5 bar working pressure 16 MUNICH high-layer filter housing with a nozzle base The MUNICH high-layer filter series is fitted with single- and multi-layer filters and activated charcoal absorption filters, making it particularly suitable for installation in areas with very limited space or restricted height (compromise with DIN 19643/5). Special multi-layer filtration also optimises filter performance. BEHNCKE filter operating technology. Know-how for reduced energy and water consumption. For our future. • High-quality with its glass-fibre reinforced polyester resin with inner sealing • Large service openings top and side • Integrated nozzle base • Drain cock with hose connection • Pressure gauge and manual air bleeder • Sight glass 150 x 50 mm • Max. working temperature 40 °C • Working pressure 2.5 bar • 6-way backwash valve, optionally available with Besgo valve or with switch panel • Automatic ventilation and air bleed valves (optional) • Differential pressure gauge (optional) • Designed for general water treatment 1 2 3 MUNICH high-layer filter system • Complete with filter container made of glass-fibre reinforced polyester resin with inner sealing • Large service openings top and side DN 280/450 • Integrated nozzle base • Drain cock with hose connection • Standard with 150 x 50 sight glass and pressure gauge • 2” backwash valve (600 d. + 800 d. containers) • Switch panel DN 125 (on the 1000 + 1200 d. containers) and front piping • Connection sizes in accordance with DIN 19643 • Fully piped with a self-priming plastic filter pump (GS certified) and a large strainer mounted on a noise-absorbing plastic pallet • Max. working temperature 40 °C • Working pressure 2.5 bar • 3” 6-way valve (d600, 800) and switch panel (d1000, 1200) or Besgo automatic valve (optional) 1 The integrated BEHNCKE nozzle base meets the most demanding 2 Sight glass with MUNICH filter 3 The nozzle base also conforms the standards for public operation (DIN 19643/19605) Filter material required for the MUNICH filter container with nozzle base • DIN filter sand • EN12904 • Anthracite DIN EN12909 • AFM (Activated Filter Material)
17 Pressure filter up to 2.5 bar working pressure 2 GOSLAR municipal filter housings Filtering technology is the most important component in the treatment of water. It is used for physical-mechanical cleaning of water in swimming pools. Unhygienic, organic and inorganic contamination of all types is caught on the filter surface and in the filter bed. Municipal filter technology with top quality standards Special multi-layer filtration is used to improve filtering performance and filtering efficiency even more. Activated charcoal absorption filters make it possible to absorb chloramines (bonded chlorine) and trihalogen methane (ancillary chlorine reaction products) from the swimmingpool water. BEHNCKE‘s optimised filter operating technology not only reduces the energy and water consumption, but the consumption of chemicals as well. And in addition to the economic aspects relating to reduced operating costs, at the same time it also makes an important ecological contribution, i.e. it is an efficient investment in our future. GOSLAR - single and multi-layer filter housings and manual filter systems – according to DIN 19605/19643 Plastic housings are made from glass-fibre reinforced polyester resin (completely atoxic and corrosion-resistant). With internal sealing, DN 220 service access at top and internal untreated water piping reinforced with support bearings. The GOSLAR filter has an integrated nozzle base and a large 280 x 450 mm side service access and 150 x 50 mm sight glass. The filter is used for general process water treatment and can be used for a wide range of applications. The filter can be supplied with ozone-resistant sealing on request (thermal treatment according to DIN 18820 for filter housing ozone-resistance). The ozone-resistance is guaranteed by the use of high-quality polyester resins based on isophthalic acid and neopentylglycol (ISO/NPG). 1 2 3 • Accredited test certificates according to KSW/ KTW and DVGW Code of Practice W270. • Pressure vessel testing by experts according to factory standard. • Access in top section and service access in cylindrical wall according to factory standard. • Working pressure 2.5 bar • Test pressure 3.25 bar • Working temperature max. 40 °C. 1 Sight glass 150 x 50 mm 2 Bottom flange connection; high working safety with DIN 19605/19643 3 GOSLAR filter with Besgo valve piping GOSLAR manual filter systems comprising: • 1 GOSLAR plastic housing completely piped (see above for description) • 1 self-priming plastic filter pump • 1 backwash pump (30 m/h flow velocity) • 1 3” backwash valve (630 and 840 d. only) manual • 2 ball cocks for shutting off pumps (pressure-side) • 1 DN 125 switch panel (1050 + 1260 d.) manual • Backwash fittings not glued • Also available with rod valve • Differential pressure gauge station at additional cost Filter material for GOSLAR • Anthracite H (brown-coal coke) DIN EN 12909 • Sand according to DIN EN 12904 • AFM (Activated Filter Material)
Page 1 and 2: Industrial products Always an idea
Page 3 and 4: Strong Determination and clarity in
Page 5 and 6: Proven and innovative technology at
Page 7 and 8: 7 Product overview 2 Filter technol
Page 9 and 10: 9 Plate heat exchangers 1 Plate hea
Page 11 and 12: 11 Flue-gas heat exchangers 1 RWT f
Page 13 and 14: 13 Heat exchangers general 1 Plasti
Page 15: 15 Pressure filters up to 2.5 bar w
Page 19 and 20: 19 Pressure filters up to 10 bar wo
Page 21 and 22: 21 Filter valves 2 Besgo rod valves
Page 23 and 24: 23 UV systems 3 BEHNCKE ABOX® UV c
Page 25 and 26: 25 Dosing technology 4 Dosing stati
Page 27 and 28: Many requirements are involved with

Plate heat exchangers - Behncke GmbH

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?