EAST CENTRAL RAILWAY - Indian Railways

EAST CENTRAL RAILWAY
SCHEDULE OF ITEMS
Tender schedule for the work of Open tender Rebuilding of Br.No.47 (1x3.05 m Arch) relieved by girder) with 3.50m
RCC Box on main line.
CONDITIONS :
Unless specifically provided for in any item below, the rates quoted for items for this schedule
shall includes the cost of :-
1. Supply of old materials of approved quality as per specification of GCC tender documents and relevant I.S.
specifications as applicable, brought to site of work. All materials supplied by Contractors should be new
and not second hand/used.
2. All transport, lead, lift, ascent, descent, crossing tracks, obstructions, observing traffic regulations etc. for
bringing materials, equipment, tools and plants, labour to the site of work as required to complete the work
in all respects.
3. All taxes, state, Central or Local.
4. All labour, skilled, unskilled, supervisory, specialized as required.
5. All temporary arrangements like shuttering, scaffolding, centering, staging, supports, shoring, making
templates etc. (without affecting the safety and working of existing track) etc. inclusive of all labour &
materials required for providing, erection, use dismantling of such arrangement after completion of
parmanent work and removing work and removing from site including submission of detailed
drawings/designs for such temporary arrangements and getting the same approved by Railway, if and as
required by the Engineer.
6. All such equipment, tools, jacks, plant and machinery etc. as may be required for executing the work in a
modern and workmen like manner as per specifications, inclusive of cost of such equipment, bringing to
site, labour & full for operation, maintenance etc.
7. All works being executed as per specifications of these tender documents, GCC & S.S. relevant is/IRS
Books as applicable to best quality and finish.
8. Executing the work as per items of this schedule, complete in all respects by inputs and any other
incidental charges other than these listed in these notes, as may be necessary. All the works shall be carried
out in accordance with the approved design and drawings.
9. Carrying out the work at any height/depth, above/below the ground at any location at the work site.
10. Removing dismantled materials belonging to Railway with safety sorting out the dismantled materials in
useable (section-wise) & scrap portions & stacking the same separately at site(s) shown by Engineer within
300 meters of the end of the bridge, nearest to the stacking area so earmarked. The material so stacked
shall be finally disposed off as directed by the Engg. For which payment shall be made as per accepted rate
of item against E. Railway Engg. Department schedule of Labour & Materials Rates 1996.
11. Construction & maintenance of all service roads required by the Contractor for execution of the works.
12. Taking all safety precautions for and keeping the existing Bridge structure safe & pass from obstruction for
uninterrupt running of trains.
13. Cutting, bending, shaping, binding & placing of steel reinforcement bars with cost of spacers, cover
blocks, binding wire of 16G-Galvanised, for RCC items.
14. Mixing, compaction, vibration of reinforced/plain concrete of all mixes by mechanical means i.e. by
mixers and vibrators of suitable design and adequate capacity.
15. Only steel shuttering shall be used for old reinforced and plan concrete works.
16. For the schedule items pertaining to E. Rly. Engineering Deptt. Schedule of Labour & Materials Rates,
1996 the following notes also shall be applicable.
i) Only percentage increase or decrease is to be quoted.
ii) It shall be the contractor’s responsibility to hand over vacant and unoccupied possession
of the completed works to Engineer’s authorised representative.