LANTEK User Manual - Ideal Industries

Chapter 3
Structured Cable Field Calibration and Testing
INTERPRETING ANALYZE TEST RESULTS
Pass/Fail Reporting
The overall Analyze test result is displayed below the Title Bar at the top right of the
display screen. Individual wire pair test results are displayed to the right of each test.
Figure 3-24: Test Results Screen
In the example above, the DC Resistance test results screen is displayed.
‣ An overall test result of pass or fail is displayed at the top right, below the date.
‣ Individual wire pair test results are displayed in the last column on the right
(Result column).
Overall and Individual test result reporting is similar to the Autotest function.
Printing Analyze Test Results
A tabular test result screen can be sent directly to a serial printer. Before sending a
result screen to the printer, the printer port needs to be configured.
Analyze Graphs
Certain Analyze test results can be viewed at the completion of the test sequence in
either a tabular or a graphical format. Analyze graphs are similar to the Autotest
graphs.
1. Run an Analyze test.
2. Position the highlighted cursor on the desired table data.
3. Press ENTER to display the wire pair table data as a graph.
3-34