LANTEK User Manual - Ideal Industries

More documents

Recommendations

Info

Chapter 7 LANTEK REPORTER Software 2. From the File menu, select Upload From Tester. The Upload dialog box displays. 3. Click the desired Upload Test Type button. 4. Select a job in the Select Upload Job text box. Note: If you want to add AutoTests from a job in the cable tester to an existing LANTEK Reporter project with the same name, you have to select the mother project as , that is located one level higher. (For example, for JOB 1 in the cable tester, select as the upload job) 5. Select a Data Source. Click OK to begin the uploading process. ‣ Select Comm Port for direct connection (Serial) with the tester. ‣ Select USB/PCMCIA Compact Flash if you have stored the test results on the compact flash card and are using the USB flash card reader. ‣ Select USB LANTEK if you have stored test results in the LANTEK Internal Memory. ‣ Select Browse for Tests if you have Stored Tests kept on a local or network drive. 7-13
Chapter 7 LANTEK REPORTER Software 6. With USB/PCMCIA Compact Flash selected, the following dialog will appear. Click OK to continue; CANCEL to exit. 7. A status box will remain on screen during the uploading process and you will have the option to cancel at any time. Note: If you want to use the USB port under Windows 98 SE, you will need special drivers. These can be found in the subdirectory \WIN98 USB Driver in the LANTEK REPORTER folder. The Windows 98 USB drivers must be installed before using the USB interface. To install the drivers, proceed as follows: Start Windows Explorer and go to the \WIN98 USB Driver subdirectory. Right click on the file USBLS120.INF and select INSTALL. WORKING WITH THE DATABASE On start-up, the database that was opened last will automatically reload. Note: The first startup of LANTEK Reporter will load an ‘empty’ database (c:\LANTEK Reporter\...) from the database directory. 7-14
Page 2 and 3:
LANTEK TM CABLE TESTER USER’S GUI
Page 4 and 5:
TABLE OF CONTENTS OPERATIONAL NOTES
Page 6 and 7:
TROUBLESHOOTING 10/100/1000 BASE-T
Page 8 and 9:
Headers and Footers Command .......
Page 10 and 11:
OPERATIONAL NOTES, CAUTIONS, AND WA
Page 12 and 13:
Chapter 1 Your Cable Tester PRODUCT
Page 14 and 15:
Chapter 1 Your Cable Tester Table 1
Page 16 and 17:
Chapter 1 Your Cable Tester Item DH
Page 18 and 19:
Chapter 1 Your Cable Tester HARD AN
Page 20 and 21:
Chapter 1 Your Cable Tester DISPLAY
Page 22 and 23:
Chapter 1 Your Cable Tester OVERVIE
Page 24 and 25:
Chapter 2 Test Setup Procedures AUT
Page 26 and 27:
Chapter 2 Test Setup Procedures TIM
Page 28 and 29:
Chapter 2 Test Setup Procedures Fig
Page 30 and 31:
Chapter 2 Test Setup Procedures PAC
Page 32 and 33:
Chapter 2 Test Setup Procedures TEM
Page 34 and 35:
Chapter 2 Test Setup Procedures Tab
Page 36 and 37:
Chapter 2 Test Setup Procedures Sav
Page 38 and 39:
Chapter 2 Test Setup Procedures OTH
Page 40 and 41:
Chapter 2 Test Setup Procedures Edi
Page 42 and 43:
Chapter 2 Test Setup Procedures ACT
Page 44 and 45:
Chapter 3 Structured Cable Field Ca
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75: Chapter 3 Structured Cable Field Ca
Page 82 and 83: CHAPTER 4 COAX CABLE FIELD CALIBRAT
Page 84 and 85: Chapter 4 Coax Cable Field Calibrat
Page 86 and 87: CHAPTER 5 FIBER OPTICS CABLE FIELD
Page 88 and 89: Chapter 5 Fiber Optics Cable Field
Page 100 and 101: Chapter 6 Fiber Optics Diagnostics
Page 112 and 113: CHAPTER 7 LANTEK REPORTER SOFTWARE
Page 114 and 115: Chapter 7 LANTEK REPORTER Software
Page 140 and 141: APPENDIX A SAFETY PRECAUTIONS HANDL
Page 142 and 143: APPENDIX B CUSTOMER SUPPORT CUSTOME
Page 144 and 145: Appendix B Customer Support IDEAL I
Page 146 and 147: Appendix C Fiber Optic Cabling Stan
show all

LANTEK User Manual - Ideal Industries

Create successful ePaper yourself

Delete template?

Save as template?