LANTEK User Manual - Ideal Industries
LANTEK User Manual - Ideal Industries LANTEK User Manual - Ideal Industries
Chapter 1 Your Cable Tester PRODUCT AND PERFORMANCE SPECIFICATIONS The LANTEK family of LAN cable certification testers is designed to test and measure twisted pair, coaxial and fiber-optic cable used for high-speed data communications networks. The following tables describes the LANTEK product specification as well as the LANTEK, FIBERTEK, and TRACETEK performance specifications PRODUCT SPECIFICATIONS Standard Test Compliance ANSI/TIA/EIA 568B, CAT 6A(Draft)/6/5e/3, ISO-F/E/D/C, AS/NZS 3080, IEEE 802.3 Ethernet, EN50173 – F/E/D/C Cable Types UTP/ScTP/FTP CAT 3/5e/6/7; IBM STP Type 1, 2, 6 Coax, 110/66/210 Block Dimensions (Display and Remote) 10.1” x 5.0” x 2.3” 256mm x 127mm x58mm Weight Display Remote Battery 2.3 lb (1050g) 2.0 lb (914g) 1.2 lb (548g) Battery Packs NiMH (Rechargeable) Typical Operating Life (Battery) 8 hours Maximum Operating Temperature 0 o C to 50 o C Maximum Storage Temperature -20 o C to +70 o C Humidity 5 to 90% noncondensing 1-2
Chapter 1 Your Cable Tester PERFORMANCE SPECIFICATIONS Table 1-2: LANTEK Performance Specification LANTEK TM Range Resolution Accuracy Length (50-100μ cable) 0-2000 ft 1 ft/0.1 m + (3% + 3 ft) Delay 0-8000 ns 1 ns/0.1 m + (3% + 1 ns) Average Impedance 35-180 Ω 0.1 Ω + (3% + 1 Ω) Capacitance (Bulk) 0-100 nF 1 pF or 3 dig + (2% + 20 pF) Capacitance 0-100 pF/ft 0.1 pF + (2% + 1 pF) DC Loop Resistance 35-200 Ω 0.1 Ω + (1% + 2 Ω) Attenuation 1 MHz – 1 GHz 0.1 dB Level III/IIIe(Draft)/IV NEXT 1 MHz – 1 GHz 0.1 dB Level III/IIIe(Draft)/IV Return Loss 1 MHz – 1 GHz 0.1 dB Level III/IIIe(Draft)/IV ELFEXT 1 MHz – 1 GHz 0.1 dB Level III/IIIe(Draft)/IV Table 1-3: FIBERTEK Performance Specification Specifications Detector Receive Wavelength: Transmitter Laser Type MM 850 nm: MM 1300 nm: SM 1310 nm: SM 1550 nm: Measurement Accuracy Attenuation: Length: Display Resolution Attenuation: Length: Linearity Length Range FIBERTEK TM MM: 850 nm, 1300 nm SM: 1310 nm, 1550 nm VCSEL Fabry-Perot MCW (Grin Lens Focused) Fabry-Perot MCW (Grin Lens Focused) Fabry-Perot MCW (Grin Lens Focused) MM 850/1300 nm: SM 1310/1550 nm: (+/- 3%) + 1 meter MM 850/1300 nm: SM 1310/1550 nm: MM 850/1300 nm: SM 1310/1550 nm: 0.2 dB MM 850 nm: MM 1300 nm: SM 1310 nm: SM 1550 nm: 0.25 dB 0.25 dB 0.1 dB 0.1 dB 1.0 meter 1.0 meter 3,000 meters 6,000 meters 10,000 meters 10,000 meters 1-3
- Page 2 and 3: LANTEK TM CABLE TESTER USER’S GUI
- Page 4 and 5: TABLE OF CONTENTS OPERATIONAL NOTES
- Page 6 and 7: TROUBLESHOOTING 10/100/1000 BASE-T
- Page 8 and 9: Headers and Footers Command .......
- Page 10 and 11: OPERATIONAL NOTES, CAUTIONS, AND WA
- Page 14 and 15: Chapter 1 Your Cable Tester Table 1
- Page 16 and 17: Chapter 1 Your Cable Tester Item DH
- Page 18 and 19: Chapter 1 Your Cable Tester HARD AN
- Page 20 and 21: Chapter 1 Your Cable Tester DISPLAY
- Page 22 and 23: Chapter 1 Your Cable Tester OVERVIE
- Page 24 and 25: Chapter 2 Test Setup Procedures AUT
- Page 26 and 27: Chapter 2 Test Setup Procedures TIM
- Page 28 and 29: Chapter 2 Test Setup Procedures Fig
- Page 30 and 31: Chapter 2 Test Setup Procedures PAC
- Page 32 and 33: Chapter 2 Test Setup Procedures TEM
- Page 34 and 35: Chapter 2 Test Setup Procedures Tab
- Page 36 and 37: Chapter 2 Test Setup Procedures Sav
- Page 38 and 39: Chapter 2 Test Setup Procedures OTH
- Page 40 and 41: Chapter 2 Test Setup Procedures Edi
- Page 42 and 43: Chapter 2 Test Setup Procedures ACT
- Page 44 and 45: Chapter 3 Structured Cable Field Ca
- Page 46 and 47: Chapter 3 Structured Cable Field Ca
- Page 48 and 49: Chapter 3 Structured Cable Field Ca
- Page 50 and 51: Chapter 3 Structured Cable Field Ca
- Page 52 and 53: Chapter 3 Structured Cable Field Ca
- Page 54 and 55: Chapter 3 Structured Cable Field Ca
- Page 56 and 57: Chapter 3 Structured Cable Field Ca
- Page 58 and 59: Chapter 3 Structured Cable Field Ca
- Page 60 and 61: Chapter 3 Structured Cable Field Ca
Chapter 1<br />
Your Cable Tester<br />
PRODUCT AND PERFORMANCE SPECIFICATIONS<br />
The <strong>LANTEK</strong> family of LAN cable certification testers is designed to test and measure<br />
twisted pair, coaxial and fiber-optic cable used for high-speed data communications<br />
networks. The following tables describes the <strong>LANTEK</strong> product specification as well as<br />
the <strong>LANTEK</strong>, FIBERTEK, and TRACETEK performance specifications<br />
PRODUCT SPECIFICATIONS<br />
Standard Test Compliance<br />
ANSI/TIA/EIA 568B, CAT 6A(Draft)/6/5e/3, ISO-F/E/D/C, AS/NZS 3080, IEEE 802.3<br />
Ethernet, EN50173 – F/E/D/C<br />
Cable Types<br />
UTP/ScTP/FTP CAT 3/5e/6/7; IBM STP Type 1, 2, 6 Coax, 110/66/210 Block<br />
Dimensions (Display and Remote)<br />
10.1” x 5.0” x 2.3”<br />
256mm x 127mm x58mm<br />
Weight<br />
Display<br />
Remote<br />
Battery<br />
2.3 lb (1050g)<br />
2.0 lb (914g)<br />
1.2 lb (548g)<br />
Battery Packs<br />
NiMH (Rechargeable)<br />
Typical Operating Life (Battery)<br />
8 hours<br />
Maximum Operating Temperature<br />
0 o C to 50 o C<br />
Maximum Storage Temperature<br />
-20 o C to +70 o C<br />
Humidity<br />
5 to 90% noncondensing<br />
1-2