LANTEK User Manual - Ideal Industries
LANTEK User Manual - Ideal Industries
LANTEK User Manual - Ideal Industries
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 7<br />
<strong>LANTEK</strong> REPORTER Software<br />
Figure 7-1: Typical Installation Window<br />
STARTING THE <strong>LANTEK</strong> REPORTER PROGRAM<br />
There are two ways to start the <strong>LANTEK</strong> Reporter program:<br />
1. From the Windows desktop, select <strong>LANTEK</strong> Reporter.<br />
2. From the Windows desktop select Start. Then, select Programs, <strong>LANTEK</strong> Reporter.<br />
TESTER-TO-PC CONNECTIVITY<br />
PC CABLES<br />
Use the USB or the Serial Port interface cables supplied with your tester.<br />
USB Interface Cable<br />
The USB (Universal Serial Bus) interface cable is supported by the Windows 98 SE,<br />
ME, 2000, and XP (Pro and Home) operating systems and can upload data<br />
approximately 20 times faster than uploads via the serial port. The USB interface<br />
provides the same functionality as the serial port but does not support printing.<br />
Serial Port Interface Cable<br />
The serial cable, commonly referred to as a Null modem cable, connects to the RS-232<br />
serial port and is capable of uploading data (test results) to the PC or laptop as well as<br />
establishing a connection to a serial port printer.<br />
7-2