Heatlock ESB2, Electric Sprue Bushing

This Heatlock series, below, is currently being replaced by the A1-series of nozzles.
Before you design check availability, stock is gradually decreased.
Spare parts will be available until at least end of 2007 (apart form NPT1 bodies)
Heatman Doc
HEATMANDOC – the full
documentation of your system.
With the manifold system, when delivered, follows a project
book, which describes the system in full. It includes drawings
of the actual system, wiring instructions, spare parts list for
the complete system including the nozzles and assembly
instructions in printing or in digital format.
Each system is also given an individual project number, this
number is of course on the cover of the project book and
also engraved on the manifold so it can easily be traced if
any details at later stage is required. If you can’t track it,
do we, at least keep track of it for five years. Just contact
us with the number engraved on the manifold.
HEATMANDOC – fullständig
dokumentation av Ditt system
Med leveransen av systemet får du en bok som innehåller
fullständig specifikation, för installation och framtida spårbarhet.
Hela systemet finns beskrivet, ritning med detaljlista,
generell installationsritning med inkopplings-schema,
reservdelslista för systemet också för dom bussningar som
systemet innehåller. Monteringsanvisning allt på papper
och i digitalt format.
Varje balk har sitt projekt nummer ingraverat på balkens
ovansida, så fort Du lyft bort fästplattan kan Du hitta rätt
vilket projekt det är. Har inte Du tillgång till historiken har
vi det åt Dig, i minst fem år.
4.1.6 Date: 031002, © LKM Heatlock Co Ltd