Heatlock ESB2, Electric Sprue Bushing

This Heatlock series, below, is currently being replaced by the A1-series of nozzles.
Before you design check availability, stock is gradually decreased.
Spare parts will be available until at least end of 2007 (apart form NPT1 bodies)
Ceramic
Save Money
–Ceramics
The diagram shows the different heat losses
of the manifold to the mould of in one case
supported by 4 iron spacers and in the other
with 4 ceramic spacers of same dimensions .
In our case the contact surface of the spacers
was 450 mm 2 .
The result shows a difference of 0,33Wh/
mm 2 between steel and ceramics. Ceramics
save 0,33Wh for every mm 2 of contact surface
as respects to steel each working hour.
Example:
our ceramic spacers KE0200305 (surface=490
mm 2 ) save approx. 160 Wh when
compared with steel.
Summerising:
• remarkable energy saving.
• less heat loss in mould means less work
for your chiller.
Spara pengar med
keramik
Diagrammet visar skillnader i värmeförlust
från varmkanalbalk till fästplatta. Jämförelsen
bygger på, i ena fallet 4 stödkutsar i stål och
i andra fallet 4 stödkutsar i keramik i samma
dimensioner.
Kontaktytan var 450 mm 2 .
Resultatet visar en skillnad av 0,33 Wh/mm 2
mellan stål och keramik, där keramiken alltså
sparar 0,33 Wh för varje mm 2 av kontaktytan
jämfört med stål.
Ett exempel:
Vår KE0200305 (kontaktyta=490 mm 2 ) sparar
ungefär 160 Wh jämfört med stål.
Summering:
• Påtaglig energibesparing
• Mindre värmeförlust till verktyget kräver
mindre kylning.
Date: 031002, © LKM Heatlock Co Ltd
3.1.1