Heatlock ESB2, Electric Sprue Bushing

Thermocouples
This Heatlock series, below, is currently being replaced by the A1-series of nozzles.
Before you design check availability, stock is gradually decreased.
Spare parts will be available until at least end of 2007 (apart form NPT1 bodies)
Thermocouples
Themocouples for accurate measuring of temperature in moulds for injection moulding. All thermocouples
are of J–Type and have grounded junctions.
Lead wires are protected by a rugged stainless steel braided cover. Length of cables 900 mm.
Connect:
—Black (Red) to the positive pole (+)
—White (Black)to the negative pole (–)
Used between bandheaters and sprue bush or in
applications where space will not permit any round
type of thermocouple. Measures temperatures up
to 400°C. The blade is made of copper and can be
contoured to various shapes.
Used to measure temperatures on i.e. manifolds.
Measures the temperature in the tip of the tube.
(400°C)
Drill the hole for the thermocouple 1 mm shorter
than the L–measurment to insure good contact at
the measuring point.
13
32
B 5,5
1
13
Ø4
8 8
6
4
6
Part No.
TC00240000
Part No.
TC00040180
L
12
TC00040185
20
Thin thermocouple used to measure the temperature on our Heatlock bushes. The thermocouple is
protected by a capton tube. It measures in the tip of the tube. The tube can be bent with an radius of min.
3mm. Measures temperatures up to 800°C. The 4 mm Ø-base can withstand temperatures up to max.
260°C.
L
45
55
75
100
110
160
210
260
Part No.
TC00140195
TC00140200
TC00140210
TC00140220
TC00140230
TC00140250
TC00140270
TC00140290
Ø1
"L" 40
Ø4
Date: 031002, © LKM Heatlock Co Ltd
2.50.5