Heatlock ESB2, Electric Sprue Bushing

This Heatlock series, below, is currently being replaced by the A1-series of nozzles.
Before you design check availability, stock is gradually decreased.
Spare parts will be available until at least end of 2007 (apart form NPT1 bodies)
Heatlock Thermocouples
Thermocouples / Termoelement
Themocouples for accurate measuring of temperature
in moulds for injection moulding. All thermocouples are
of J–Type and have grounded junctions.
Lead wires are protected by a rugged stainless steel
braided cover. Length of cables 900 mm.
Connect:
Black (Red) to the positive pole (+)
White (Black)to the negative pole (–)
Termoelement för exakt mätning av temperaturen i plasformar.
Samtliga termoelement är av J-typ (FeCuNi) och
isolerade.
Ytterhölje av flätad rostfri tråd.
Kabellängd 900 mm
Koppla:
Svart (röd) till pluspol (+)
Vit (svart) till minuspol (–)
Used between bandheaters and sprue bush or in applications
where space will not permit any round type of
thermocouple. Measures temperatures up to 400°C. The
blade is made of copper and can be contoured to various
shapes.
För instickning under t. ex. ringelement. Mäter temperaturer
upp till 400°C. Plattan är gjord av koppar och kan
formas till önskad form.
Used to measure temperatures on i.e. manifolds. Measures
the temperature in the tip of the tube. (400°C)
Drill the hole for the thermocouple 1 mm shorter than the
L–measurment to ensure good contact at the measuring
point.
För mätning av temperaturen på t. ex. varmkanalplattor.
Mätpunkten ligger längst fram i spetsen. Gör hålet för
givaren 1 mm kortare än L-måttet så att givaren säkert
ligger i botten på hålet.
13
32
L 5,5
13
1
Ø4
8 8
Art. nr
TC00240000
4
6
6
Art. nr
TC00040180
TC00040185
L
12
20
Date: 031113, © LKM Heatlock Co Ltd
4.50.7