Heatlock ESB2, Electric Sprue Bushing
Heatlock ESB2, Electric Sprue Bushing
Heatlock ESB2, Electric Sprue Bushing
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
34.5<br />
7.5<br />
This <strong>Heatlock</strong> series, below, is currently being replaced by the A1-series of nozzles.<br />
Before you design check availability, stock is gradually decreased.<br />
Spare parts will be available until at least end of 2007 (apart form NPT1 bodies)<br />
<strong>Heatlock</strong> Manifold Heater<br />
Tubular Heater / Element – MHX<br />
Ø8.5<br />
45<br />
R10<br />
cc<br />
R16<br />
34.5 42<br />
Ø8.5<br />
cc<br />
For manifolds upp to cc ≤ 100 mm<br />
För balkar upp till cc ≤ 100 mm<br />
R10<br />
45<br />
Part No. cc L Watt<br />
MHX0600660 60 511 660<br />
MHX0800830 80 624 830<br />
MHX1001000 100 737 1000<br />
MHX1201140 120 835 1140<br />
MHX1401310 140 948 1310<br />
MHX1601480 160 1062 1480<br />
MHX2001820 200 1288 1820<br />
MHX2401820 240 1514 1820<br />
cc<br />
34.5<br />
R10<br />
Additional bending of<br />
existing one<br />
Eventuell fortsättning<br />
av befintlig böjning<br />
R16<br />
cc<br />
If you need to bend the heater 180°, make sure to use a<br />
pipe as support of minimum radius 10 mm. This will prevent<br />
the heater to be damaged.<br />
For further information, get in contact with your local distributor<br />
of <strong>Heatlock</strong>. Latest information always available at<br />
www.heatlock.com<br />
For manifolds upp to cc ≤ 240 mm<br />
För balkar upp till cc ≤ 240 mm<br />
Om Du behöver en 180° vinkel, se till att använda ett<br />
rör med min. radie 10 mm för att inte riskera att knäcka<br />
elementet.<br />
För ytterligare information, vänligen kontakta oss. Senaste<br />
information finner du alltid på www.heatlock.com<br />
4.50.4 Date: 031113, © LKM <strong>Heatlock</strong> Co Ltd
Change language