Heatlock ESB2, Electric Sprue Bushing
Heatlock ESB2, Electric Sprue Bushing
Heatlock ESB2, Electric Sprue Bushing
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
This <strong>Heatlock</strong> series, below, is currently being replaced by the A1-series of nozzles.<br />
Before you design check availability, stock is gradually decreased.<br />
Spare parts will be available until at least end of 2007 (apart form NPT1 bodies)<br />
<strong>Heatlock</strong> Standard Manifold<br />
Design of the following sizes:<br />
Utförande i följande storlekar:<br />
MX0060...-MX0100... feed Ø6 - 10<br />
Recommendation<br />
To avoid any leakage, we recommend you to increase the<br />
number of bolts, according to the drawing to the left. The<br />
bolts should be placed over the centre of every nozzle, as<br />
close as possible to the manifold (leave a space of 15 mm).<br />
9<br />
Rekommendation<br />
För att förhindra eventuella läckage kan man med fördel<br />
placera extra bultar enligt riningen till vänster. Dessa bör<br />
placeras mitt för bussningarnas respektive centrum, så nära<br />
balken som möjligt (lämna 15 mm runt om).<br />
C L<br />
Tightening torque Nm,<br />
distribution of applied<br />
torque + - 5%.<br />
Quality 12.9<br />
Size Torque Nm<br />
M8 40<br />
M10 79<br />
M12 136<br />
M16 333<br />
M20 649<br />
Explanation of measure abbreviations<br />
Design of the following sizes:<br />
Utförande i följande storlekar:<br />
MX0120...-MX0240... feed Ø06 - 12<br />
Abb<br />
c/c X<br />
c/c Y<br />
T<br />
Feed<br />
L<br />
V<br />
W<br />
CL<br />
Explanation<br />
Distance between<br />
drops in x-ledge<br />
Distance between<br />
drops in y-ledge<br />
Thickness of manifold<br />
Feed channel<br />
Lenght<br />
Total Volume of feed<br />
channels<br />
Wattage<br />
Centre line<br />
C L<br />
4.4.2 Date: 031002, © LKM <strong>Heatlock</strong> Co Ltd