You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Introduction 1<br />
HEATLOCK Global Service 2-3<br />
<strong>Why</strong> <strong>Hot</strong> <strong>Runner</strong> ? 4<br />
Gate Diameter 5<br />
Nozzel Features 6<br />
Nozzel Selection Guide Table 7<br />
A1-EN Series 8-9<br />
A1-TP Series 10-11<br />
A1-TN Series 12-13<br />
A1-T Series 14-17<br />
A1-VG Series 18-19<br />
A2-MT Series 20-21<br />
<strong>Hot</strong> Half 22-23<br />
<strong>Hot</strong> <strong>Runner</strong> System Structure 24<br />
Manifold Assembly 25<br />
I(F type) Manifold 26<br />
I(B type) Manifold 27<br />
H(F type) Manifold 28<br />
H(B type) Manifold 29<br />
X(F type) Manifold 30<br />
X(B type) Manifold 31<br />
X-X(F type) Manifold 32<br />
X-X(B type) Manifold 33<br />
Ceramic 34-35<br />
Titanium Ring 36<br />
Feed Bush Heater 37-38<br />
Connect Box 39-40<br />
US Connect Box 41<br />
Multi Connect Box 42-43<br />
Connector 44<br />
US Connector 45<br />
HLDC-15A 46<br />
Filter Nozzles 47-48<br />
A1 Nozzle Spare Parts 49-50<br />
Inquiry Form 51
INTRODUCTION<br />
WELCOME TO<br />
HEATLOCK<br />
Your global partner for hot-runner<br />
system technology.<br />
We can offer you excellent localised<br />
service throughout China; the biggest<br />
mould making market in the world, as<br />
well as through our global network of<br />
sales offices and distributors.<br />
<strong>Heatlock</strong> hot-runners are known for their<br />
ceramic components used for insulating<br />
all the contact points between the hotrunner<br />
system and the mould. Ceramic<br />
has only 7% of the heat conductivity of<br />
steel making it an exceptional insulator.<br />
We were the first in the world to use<br />
this technology for hot-runners and<br />
introduced it at the K82 Exhibition.<br />
Today we deliver everything from single<br />
cavity solutions to complete multi cavity<br />
hot halves. If you require your system<br />
to be proven with simulations do we<br />
also provide it for you.<br />
Our production facility in China is<br />
equipped to manufacture components<br />
and systems to the highest <strong>Heatlock</strong><br />
standard with exceptional delivery times<br />
and competitive prices.<br />
<strong>Heatlock</strong>: Your global partner with the<br />
perfect China connection!
Global Service<br />
For a complete list of our distributor around the world, please refer to our website :<br />
www.heatlock.com<br />
<br />
14th Floor, South China Building<br />
1-3 Wyndham Street<br />
Central Hong Kong<br />
Tel : (852) 8120 5469<br />
Fax : (852) 3020 1725<br />
E-mail : frontdesk@heatlock.com<br />
<br />
Room 506, Block B,<br />
ZhiXing International Business Building<br />
South ZhanQian Road, Changping Town<br />
Guangdong, PRC<br />
Zip Code523560<br />
Tel(86) 0769-8382 5600<br />
Fax(86) 0769-8382 5626<br />
E-mail : frontdesk@heatlock.com<br />
www.heatlock.com
HEATLOCK Distributors<br />
Distributors Europe<br />
BULGARIA ITALY RUSSIA<br />
COMMSET LTD A E D Novaya Orbita Co., Ltd<br />
Tel: +359 2 961 113 Tel: 0424/708662 Tel: +7 495 514-83-02, 518-00-41<br />
Fax: +359 2 961 1134 Fax: 0424/418112 Fax: +7 495 933-87-12, 933-87-13<br />
Email: commset@cablebg.net E-mail: aedfern@tin.it E-mail: sales@injection.ru<br />
Website: www.injection.ru<br />
DENMARK NETHERLANDS SWEDEN<br />
N. Helldin AB OBINION Plastics Machinery N. Helldin AB<br />
Tel: +46 511 132 00 Tel: +31 (0)852 73 30 50 / Tel: +46 511 132 00<br />
Fax: +46 511 172 85 +31 (0)497 38 38 09 Fax: +46 511 172 85<br />
E-mail: info@helldin.com Fax: +31 (0)842 24 44 49 E-mail: info@helldin.com<br />
Website: www.helldin.com Cell: +31 (0)6 38 75 30 80 Website: www.helldin.com<br />
Email: avermeijden@obinion.com<br />
Website: www.obinion.com<br />
FINLAND NORWAY SYRIA<br />
Valmisosa Oy Deli Verkt¿ySenter AS Polymeric Technical Products<br />
Phone: +358-2-6331744 Tel: +47 6495 6218 Tel: +963 11 6351510<br />
Fax: +358-2-6331746 Fax: +47 6495 6202 Fax: +963 11 6351510<br />
E-mail: valmis@dnainternet.net E-mail: dvs@strack.no E-mail: wayoub@gmx.net<br />
GERMANY POLAND SWITZERLAND<br />
i-mold GmbH & Co.KG Roal S.C. N. Helldin AB<br />
Phone: +49 (0) 6161-8070-11 PL-61 381 Poznan Tel: +46 511 132 00<br />
Fax:+49 (0) 6161-8070-33 Phone: +48 61 843 4581 Fax: +46 511 172 85<br />
E-mail: info@i-mold.com Fax: +48 61 843 4581 E-mail: info@helldin.com<br />
E-mail: jackowiak@poczta.onet.pl Website: www.helldin.com<br />
ISRAEL PORTUGAL UNITED KINGDOM<br />
A.Zilka Marketing & Engineering Ltd. SOREP Lda, Diemould Service Co Ltd.<br />
Tel: +972-3-5584-936 Tel: 351 244 572 800 Tel: (+44) 1494 523811<br />
Fax: +972-3-5584-937 Fax: +351 244 572 801 Fax: (+44) 1494 452898<br />
Cell: +972-505-250-029 (Avraham Zilka) E-mail: fruivo@sorep.co.pt E-mail: sales@dms-diemould.co.uk<br />
Email: ranzilka@bezeqint.net<br />
Website: www.sorep.co.pt<br />
Distributors Asia<br />
PRC INDIA INDONESIA<br />
<strong>Heatlock</strong> Co. Ltd. Pillai and Peter Associates Pvt. Ltd. PT. Ladang Baja Murni<br />
Room 506, Block B. Phone: 0091-22-862 69 00 Jl. Danau Sunter Selatan Blok O 3/40<br />
ZhiXing International Business Building Fax: 0091-22-862 69 00 Sunter Agung Podomoro<br />
South ZhangQian Road, Changping Town E-mail: anish@giasbmc.vsnl.net.in Jakarta Utara<br />
DongGuan, GuangDong, PRC<br />
Indonesia<br />
Phone: (86)0769-8382 5600<br />
Email address: ibmmould@hotmail.com<br />
Fax: (86) 0769-8382 5626 Telp: +62 21 6511595<br />
E-mail: frontdesk@heatlock.com +62 21 6510508<br />
Fax: +62 21 6510244<br />
HONG KONG<br />
<strong>Heatlock</strong> Co. Ltd.<br />
14th Floor South China Building<br />
1-3 Wyndham Street, Central, Hong Kong<br />
Phone: (852) 8120 5469<br />
Fax: (852) 2653 5230<br />
E-mail: frontdesk@heatlock.com<br />
Distributors North America<br />
CANADA<br />
Diemould Service Co (Canada) Ltd Phone: (519) 737-6743 Fax: (519) 737-6744<br />
1875 Blackacre Drive Phone: (800) 265 4885 Fax: (800) 845 3807<br />
Oldcastle, Ontario,N0R 1L0<br />
E-mail: sales@dmscomponents.com<br />
U.S.A.<br />
Diemold Supply DMS Inc. Die Mold Supply DMS Inc. Diemold Service Company<br />
17197 Newhope Street, Unit I, 15 Duffy Dr. 1026 National Parkway<br />
Fountain Valley, California 92708 Taunton, Massachusetts 02780-4056 Schaumburg, Illinois 60173-4519<br />
Phone: 714-751-1615 Tel:(800) 265-5885 Tel: (847) 466-0103<br />
Phone: 800-421-3993 Fax:(800) 845-3807 Tel: 888-766-8006<br />
Fax: 714-751-3861 Fax: (847) 466-0108<br />
Fax: 800-953-9561 Fax: 800-367-4199<br />
Distributors Australia<br />
Australia<br />
EOC Normalien Pty Ltd Phone: (03) 9583 0166<br />
51 Shearson Crescent Fax: (03) 9584 1119<br />
Mentone,Victoria<br />
E-mail: eocaust@netspace.net.au<br />
3194,Australia
<strong>Why</strong> <strong>Hot</strong> <strong>Runner</strong><br />
How you can be more effective and more competitive by using our<br />
ceramically insulated HEATLOCK hot runner system.<br />
The old way with a cold sprue<br />
fig.1<br />
Improved efficiency with a<br />
HEATLOCK sprue bushing<br />
fig.2<br />
Reduce flow length in cold steel by<br />
68%<br />
fig.3<br />
Direct gating usually is the most<br />
effective way<br />
fig.4<br />
www.heatlock.com
Gate Diameter<br />
For bushes and torpedoes<br />
Shotweight per bush in grams<br />
2000<br />
1000<br />
500<br />
200<br />
100<br />
20<br />
10<br />
6<br />
2<br />
1<br />
1<br />
2<br />
3<br />
0.75 1.25 1.75 2.25 3.2 4.7 6.4 7.9<br />
1.0 1.5 2.0 2.5 4.0 5.5 7.2<br />
Gate diameter<br />
1. Low viscosity materials, PS, PE, PP<br />
2. Medium viscosity materials ABS, SAN, PA, POM<br />
3. High viscosity materials PC, PMMA, Noryl, PUR, re-inforced materials<br />
Note : 1. For TP nozzle, gate diameter reduces 30%<br />
2. For filled materials, gate diameter increases 20%<br />
The diagram above gives a guideline figure for<br />
the gate diameter needed for different plastics<br />
and shot weights.<br />
Note: If the gate diameter is too small, an<br />
unnecessarily high bushing temperature will have<br />
to be set for the gate not to freeze between shots.<br />
The suggested figures are approximate. Gate<br />
dimension may be influenced by the shape of the<br />
part and the design of the mould etc.<br />
The balance between shot weight, injection rate,<br />
tool temperature, temperature pattern opposite<br />
gate, cooling around gate and injection pressure<br />
are all factors that affect gate size. A small gate<br />
freezes quicker than a large gate. On injection<br />
moulding with very short cycle times and short<br />
injection times, it may be necessary to design<br />
gate cooling so that it does not overheat.<br />
If the sprue bushing is feeding a runner which<br />
has a gate into a cavity, it may be suitable to make<br />
the bushing gate larger than actually necessary.<br />
This way pressure drop and shear will be reduced.<br />
If an electric sprue bushing is used to feed a<br />
runner, this means that length of flow in cold steel<br />
has been reduced equivalent to the bushing length.<br />
Due to this cross section, the runner can be made<br />
smaller than usual. This is important in order to<br />
get shortest possible cycle time.<br />
Start with a smaller gate that indicated in the table.
Nozzle Features<br />
www.heatlock.com<br />
16-11-2011
16-11-2011<br />
A1 Nozzle<br />
*** Good<br />
** Ok<br />
* Contact HEATLOCK<br />
-- Not recommend<br />
Feed Channel (mm)<br />
Low-viscosity PE, PS, PP<br />
Medium-viscosity<br />
ABS, PA, POM, SAN<br />
High-viscosity<br />
Lowviscosity<br />
PS/PE<br />
PP<br />
ABS/SAN<br />
POM<br />
Mediumviscosity<br />
LCP<br />
PBT<br />
PET<br />
PA6/PA6.6<br />
PC/PMMA<br />
Highviscosity<br />
PPO<br />
PES/PEK<br />
PPS/PEI<br />
L/M/H<br />
viscosity +<br />
additives<br />
GF/CF/FR<br />
EN1<br />
4<br />
200<br />
100<br />
40<br />
EN2 EN3<br />
6 9<br />
500 850<br />
270 400<br />
150 280<br />
***<br />
***<br />
***<br />
***<br />
**<br />
***<br />
**<br />
*<br />
***<br />
***<br />
***<br />
**<br />
***<br />
EN4<br />
14<br />
1650<br />
800<br />
550<br />
PPT1 PPT2<br />
TP1 TP2 TP3<br />
4 6 9<br />
200 500 850<br />
100 270 400<br />
40 150 280<br />
***<br />
***<br />
***<br />
**<br />
**<br />
**<br />
*<br />
*<br />
***<br />
***<br />
**<br />
**<br />
**<br />
TP4<br />
14<br />
1650<br />
800<br />
550<br />
NPT1 NPT2<br />
TN1 TN2 TN3<br />
4 6 9<br />
140 330 580<br />
60 220 340<br />
20 70 200<br />
***<br />
***<br />
***<br />
**<br />
--<br />
*<br />
*<br />
*<br />
**<br />
*<br />
--<br />
--<br />
*<br />
TN4<br />
14<br />
1200<br />
650<br />
400<br />
VG1<br />
4<br />
160<br />
70<br />
20<br />
VG2 VG3<br />
6 9<br />
390 700<br />
85 300<br />
50 180<br />
***<br />
***<br />
***<br />
*<br />
*<br />
*<br />
*<br />
*<br />
***<br />
*<br />
*<br />
*<br />
*<br />
VG4<br />
14<br />
1200<br />
550<br />
380<br />
A2MT<br />
4<br />
140<br />
60<br />
*<br />
***<br />
***<br />
***<br />
**<br />
--<br />
*<br />
*<br />
*<br />
**<br />
**<br />
*<br />
*<br />
--<br />
Nozzle Selection Guide Table
www.heatlock.com
A1EN Series<br />
(mm)<br />
Size L L1 L(+) d1 d2 d3 d4 d5 d6 d7 d8 L2 D1 D2 D3 D4 D5 D6<br />
A1EN1040 40 40.58<br />
A1EN1050 50 50.60<br />
A1EN1060 60 60.61<br />
C30<br />
C30<br />
5 4 6 29 20 23 18 1.5 6.7 6 23<br />
A1EN1080 80 80.65<br />
T30<br />
T30<br />
20 6 23<br />
A1EN1100 100 100.69<br />
A1EN1120 120 120.73<br />
A1EN2040 40 40.58<br />
A1EN2060 60 60.61<br />
A1EN2080 80 80.65<br />
C40<br />
C40<br />
A1EN2100 100 100.69 5 6 8 35 24 27 24.5 2 8 8 27<br />
T36<br />
T36<br />
A1EN2120 120 120.73<br />
26.5 6 27<br />
A1EN2140 140 140.77<br />
A1EN2160 160 160.80<br />
A1EN3060 60 60.61<br />
A1EN3080 80 80.65<br />
A1EN3100 100 100.69<br />
C62<br />
C62<br />
A1EN3120 120 120.73 10 9 12 48 34 39 32 2 9 12 39<br />
T50<br />
T50<br />
A1EN3140 140 140.77<br />
34 9 39<br />
A1EN3160 160 160.80<br />
A1EN3180 180 180.84<br />
A1EN4080 80 80.65<br />
A1EN4100 100 100.69<br />
A1EN4120 120 120.73<br />
C56<br />
C56<br />
A1EN4140 140 140.77 20 14 16 52 38 44 34.5 3 9 16 44<br />
T54<br />
T54<br />
A1EN4160 160 160.80<br />
36.5 14 44<br />
A1EN4180 180 180.84<br />
A1EN4200 200 200.88<br />
** D3 Dimension: T is Titanium<br />
Length Expansion (L1 = L + X.XX) (mm)<br />
The software nozzle est.rar calculating L1 length is available on our website, please go to<br />
http://www.heatlock.com/cad/cad.htm and use the pull down menu to download it.<br />
Shot Weight<br />
Size (g) Low-viscosity Med-viscosity High-viscosity Gate size<br />
A1-EN size 1
www.heatlock.com
A1TP Series<br />
(mm)<br />
Size L L1 d1 d2 d3 d4 d5 d6 d7 d8 L2 H D1 D2 D3 D4 D5 D6 D7<br />
A1TP1040 40 40.11<br />
A1TP1050 50 50.13<br />
A1TP1060 60 60.15<br />
C30<br />
C30<br />
4 11 29 20 23 18 0.6 6 0.2 11 23<br />
A1TP1080 80 80.19<br />
T30<br />
T30<br />
20 6 23 9<br />
A1TP1100 100 100.23<br />
A1TP1120 120 120.26<br />
A1TP2040 40 40.08<br />
A1TP2060 60 60.16<br />
A1TP2080 80 80.20<br />
C40<br />
C40<br />
A1TP2100 100 100.24 6 14 35 24 27 24.5 0.8 7.5 0.2 14 27<br />
T36<br />
T36<br />
A1TP2120 120 120.28<br />
26.5 6 27 12<br />
A1TP2140 140 140.31<br />
A1TP2160 160 160.35<br />
A1TP3060 60 60.17<br />
A1TP3080 80 80.21<br />
A1TP3100 100 100.25<br />
C62<br />
C62<br />
A1TP3120 120 120.29 9 19 48 34 39 32 1.2 9.5 0.3 19 39<br />
T50<br />
T50<br />
A1TP3140 140 140.32<br />
34 9 39 16.5<br />
A1TP3160 160 160.36<br />
A1TP3180 180 180.40<br />
A1TP4080 80 80.21<br />
A1TP4100 100 100.25<br />
A1TP4120 120 120.29<br />
C56<br />
C56<br />
A1TP4140 140 140.33 14 25 52 38 44 34.5 1.8 10.5 0.4 25 44<br />
T54<br />
T54<br />
A1TP4160 160 160.37<br />
36.5 14 44 22.5<br />
A1TP4180 180 180.40<br />
A1TP4200 200 200.44<br />
** D3 Dimension: T is Titanium<br />
Length Expansion (L1 = L + X.XX) (mm)<br />
The software nozzle est.rar calculating L1 length is available on our website, please go to<br />
http://www.heatlock.com/cad/cad.htm and use the pull down menu to download it.<br />
Shot Weight<br />
Size (g) Low-viscosity Med-viscosity High-viscosity Gate size<br />
A1-TP size 1
www.heatlock.com
A1TN Series<br />
(mm)<br />
Size L L1 d1 d2 d3 d4 d5 d6 d7 d8 L2 D1 D2 D3 D4 D5 D6 H<br />
A1TN1040 40 40.11<br />
A1TN1050 50 50.13<br />
A1TN1060 60 60.15<br />
C30<br />
C30<br />
4 11 29 20 23 18 0.6 6 11 23<br />
A1TN1080 80 80.19<br />
T30<br />
T30<br />
20 6 23 0.2<br />
A1TN1100 100 100.23<br />
A1TN1120 120 120.26<br />
A1TN2040 40 40.08<br />
A1TN2060 60 60.16<br />
A1TN2080 80 80.20<br />
C40<br />
C40<br />
A1TN2100 100 100.24 6 14 35 24 27 24.5 0.8 7.5 14 27<br />
T36<br />
T36<br />
A1TN2120 120 120.28<br />
26.5 6 27 0.2<br />
A1TN2140 140 140.31<br />
A1TN2160 160 160.35<br />
A1TN3060 60 60.17<br />
A1TN3080 80 80.21<br />
A1TN3100 100 100.25<br />
C62<br />
C62<br />
A1TN3120 120 120.29 9 19 48 34 39 32 1.2 9.5 19 39<br />
T50<br />
T50<br />
A1TN3140 140 140.32<br />
34 9 39 0.3<br />
A1TN3160 160 160.36<br />
A1TN3180 180 180.40<br />
A1TN4080 80 80.21<br />
A1TN4100 100 100.25<br />
A1TN4120 120 120.29<br />
C56<br />
C56<br />
A1TN4140 140 140.33 14 25 52 38 44 34.5 1.8 10.5 25 44<br />
T54<br />
T54<br />
A1TN4160 160 160.37<br />
36.5 14 44 0.4<br />
A1TN4180 180 180.40<br />
A1TN4200 200 200.44<br />
** D3 Dimension: T is Titanium<br />
Length Expansion (L1 = L + X.XX) (mm)<br />
The software nozzle est.rar calculating L1 length is available on our website, please go to<br />
http://www.heatlock.com/cad/cad.htm and use the pull down menu to download it.<br />
Shot Weight<br />
Size (g) Low-viscosity Med-viscosity High-viscosity Gate size<br />
A1-TN size 1
www.heatlock.com
www.heatlock.com
www.heatlock.com
A1VG Series<br />
(mm)<br />
** D3 Dimension: T is Titanium<br />
Length Expansion (L1 = L + X.XX) (mm)<br />
The software nozzle est.rar calculating L1 length is available on our website, please go to<br />
http://www.heatlock.com/cad/cad.htm and use the pull down menu to download it.<br />
A1-VG size 1 160 70 20<br />
A1-VG size 2 390 85 50<br />
A1-VG size 3 700 300 180<br />
A1-VG size 4 1200 550 380<br />
(mm)<br />
Shot Weight<br />
Size (g) Low-viscosity Med-viscosity High-viscosity<br />
Order example :<br />
A1VG--X--XXX---XX<br />
(Series No.) (L)<br />
(d10)<br />
A1VG--1-- 040-- 11
www.heatlock.com 16-11-2011
A2MT<br />
A2MT Series<br />
Series L L1 d d1 d2 d3 d4 d5 d6 d7 L2 D D1 D2 D3 D5 D6 D7 D8<br />
A2MT04040102 40 40.13 10 8 8 T50 48 34 39 32 7.5 10 8 8 T50 39 39 34 13<br />
A2MT04080102 80 80.23<br />
(mm)<br />
A2MT04060162 60 60.18<br />
A2MT04080162 80 80.23 16 8 8 T54 52 38 44 34.5 7.5 16 8 8 T54 44 44 36.5 13<br />
A2MT04060164 60 60.18<br />
A2MT04080164 80<br />
80.23<br />
** D3 Dimension: T is Titanium<br />
Shot Weight<br />
Size (g) Low-viscosity Med-viscosity Gate size<br />
A2MT<br />
(mm)<br />
Gate layout<br />
(view from cavity)<br />
Order example :<br />
A2MT--X--XXX---XX-X<br />
(Series No.) (L) (D) (tip Qty )<br />
A2MT-04-- 080-- 22- 2<br />
16-11-2011
www.heatlock.com
<strong>Hot</strong> <strong>Runner</strong> System Structure<br />
Manifold Design<br />
Feed bush<br />
Ceramic back<br />
support<br />
Back spacer<br />
Purge guard<br />
Thermocouple<br />
Manifold<br />
Tubular heater<br />
Bush<br />
Ceramic<br />
centre spacer<br />
Centre location<br />
spacer<br />
www.heatlock.com
Manifold Assembly
36<br />
46<br />
46<br />
56<br />
56<br />
56
100<br />
100<br />
100
Titanium Ring<br />
Size Item code<br />
Size 1 TIM03002308 30 23<br />
TIM03602708 36 27<br />
Size 2 TIM04002708 40 27<br />
TIM05002708 50 27<br />
Size 3 TIM05003908 50 39<br />
Size 4 TIM05404408 54 44<br />
Nozzle band heater<br />
Part No.<br />
Thermocouple<br />
White (2x) Live<br />
Yellow/Green Earth<br />
Red Negative [ + ]<br />
Blue Positive [ - ]<br />
Part No. Dimension a b Watts<br />
D-CY-BH127150 33x10 27 33 150<br />
D-CY-BH230200 36x10 30 36 200<br />
D-CY-BH233200 39x10 33 39 200<br />
D-CY-BH235250 41x10 35 41 250<br />
D-CY-BH347250 53x10 47 53 250<br />
D-CY-BH451300 57x10 51 57 300<br />
Nozzle band heater bore<br />
Part No. A B<br />
D-CY-BH127150 40 30<br />
D-CY-BH230200 43 32<br />
D-CY-BH233200 45 32<br />
D-CY-BH235250 48 34<br />
D-CY-BH347250 62 40<br />
D-CY-BH451300 65 40<br />
www.heatlock.com<br />
22/07/2011
DSPXX30XX<br />
Item code L A Band sheet Heater<br />
DSP4503008<br />
DSP4503010<br />
8<br />
10<br />
DSP4503012 45 12<br />
BS230020250<br />
---<br />
DSP4503014<br />
14<br />
DSP4503016<br />
16<br />
DSP7003008 70 8 BS230036400<br />
DSPXX02508<br />
Item code L A Band sheet Heater<br />
DSP4002508<br />
40<br />
---<br />
DSP5002508<br />
50<br />
8<br />
---<br />
BS15240210200<br />
DSP7002508<br />
70<br />
BS15240410350<br />
DSP6003508<br />
Item code L A Band sheet Heater<br />
DSP6003508<br />
60 8 --- BS235030550<br />
DSP52032XX<br />
Item code L A Band sheet Heater<br />
DSP5203208<br />
DSP5203210<br />
DSP5203212<br />
DSP5203214<br />
DSP5203216<br />
52<br />
8<br />
10<br />
12<br />
14<br />
16<br />
BSS35362004 BS230020250
Feed bush heater wiring<br />
* A heated feed bush is recommended for all polymers except PE, PP and PS.<br />
Heater<br />
Thermocouple<br />
White (2x) Live<br />
Yellow/Green Earth<br />
Red Positive [ + ]<br />
Blue Negative [ - ]<br />
Feed bush heater bore<br />
www.heatlock.com
Connector Box<br />
Type L1<br />
6 PIN 70<br />
10 PIN 83<br />
No.<br />
Pin<br />
CONNB06 6<br />
CONNB10 10
Connector Box<br />
Type L1<br />
16 PIN 103<br />
24 PIN 130<br />
No.<br />
Pin<br />
CONNB16 16<br />
CONNB24 24<br />
<br />
www.heatlock.com
US Standard Connector Boxes<br />
Type L1<br />
10 PIN 83<br />
16 PIN 103<br />
24 PIN 130<br />
No.<br />
Pin<br />
US-CONNB10 10<br />
US-CONNB16 16<br />
US-CONNB24 24
Multi Connector Box<br />
Type L1<br />
16 PIN 103<br />
24 PIN 130<br />
<br />
www.heatlock.com
Multi Connector Box<br />
Type L1<br />
16 PIN 103<br />
24 PIN 130
Connector<br />
Insert male<br />
No.<br />
MASKINHA06<br />
MASKINHA10<br />
MASKINHA16<br />
MASKINHA24<br />
Description<br />
Insert male, 6-pin<br />
Insert male, 10-pin<br />
Insert male, 16-pin<br />
Insert male, 24-pin<br />
Insert female<br />
No.<br />
MASKINHO06<br />
MASKINHO10<br />
MASKINHO16<br />
MASKINHO24<br />
Description<br />
Insert female, 6-pin<br />
Insert female, 10-pin<br />
Insert female, 16-pin<br />
Insert female, 24-pin<br />
Housing mould, flange<br />
A series<br />
No.<br />
Description<br />
Lock Qty<br />
Lid (Y/N)<br />
MASKKAFL06<br />
Housing mould, flange 6-pin<br />
1<br />
N<br />
MASKKAFL10<br />
Housing mould, flange 10-pin<br />
2<br />
N<br />
MASKKAFL16<br />
Housing mould, flange 16-pin<br />
2<br />
N<br />
MASKKAFL24<br />
Housing mould, flange 24-pin<br />
2<br />
N<br />
B series<br />
No.<br />
Description<br />
Lock Qty<br />
Lid (Y/N)<br />
MASKKAFL06C<br />
Housing flange with cover 6-pin<br />
1<br />
Y<br />
MASKKAFL16C<br />
Housing flange with cover 16-pin<br />
1<br />
Y<br />
MASKKAFL24C<br />
Housing flange with cover 24-pin<br />
1<br />
Y<br />
Hood loom, top exit<br />
No.<br />
MASKKAKT06<br />
MASKKAKT10<br />
MASKKAKT16<br />
MASKKAKT24<br />
Description<br />
Hood loom, top exit 6-pin<br />
Hood loom, top exit 10-pin<br />
Hood loom, top exit 16-pin<br />
Hood loom, top exit 24-pin<br />
e<br />
Boring<br />
a<br />
b<br />
bottom:c<br />
d<br />
e<br />
6-polig<br />
52<br />
70<br />
32<br />
35<br />
M4<br />
c<br />
d<br />
10-polig<br />
65<br />
83<br />
32<br />
35<br />
M4<br />
R=3<br />
16-polig<br />
24-polig<br />
86<br />
112<br />
103<br />
130<br />
32<br />
32<br />
35<br />
35<br />
M4<br />
M4<br />
a<br />
b–0.1<br />
<br />
www.heatlock.com
US Standard Connector<br />
Male Insert<br />
Item Code<br />
CONNT-10PIN/M<br />
CONNT-16PIN/M<br />
CONNT-24PIN/M<br />
Description<br />
US Spec.Connector 10 Pin,male<br />
US Spec.Connector 16 Pin,male<br />
US Spec.Connector 24 Pin,male<br />
Female Insert<br />
Item Code<br />
CONNT-10PIN/F<br />
CONNT-16PIN/F<br />
CONNT-24PIN/F<br />
Description<br />
US Spec.Connector 10 Pin,female<br />
US Spec.Connector 16 Pin,female<br />
US Spec.Connector 24 Pin,female<br />
Hood, top entry<br />
Item Code<br />
HLE25TEPG21<br />
Description<br />
HEATLOCK<br />
US Spec. Hood, top entry<br />
Housing, mould base<br />
Item Code<br />
HLE25BH<br />
Description<br />
HEATLOCK<br />
US Spec. Housomg, bulkhead mounting
HLDC-15A controller<br />
www.heatlock.com
M1<br />
60/80/150<br />
W<br />
H<br />
M2<br />
60/80/150<br />
W<br />
H<br />
M3<br />
60/80/150<br />
W<br />
H
Order Form<br />
N40<br />
For shot weight
(<strong>Hot</strong> <strong>Runner</strong> System Department)<br />
Changping Tel : (86) 0769-8382 5600 Fax: (86) 0769-8382 5626<br />
Hong Kong Tel : (852) 8120 5469 Fax: (852) 3020 1725 Email: frontdesk@heatlock.com<br />
Filling the form and fax to us : (86) 0769-8382 5626<br />
For detail information, please go to our web : www.heatlock.com<br />
HEATLOCK MOULDING SYSTEM QUOTE REQUEST FORM<br />
Customer Quote No:<br />
Date:<br />
Company:<br />
Contact:<br />
Address:<br />
Tel: Fax: E-mail:<br />
Please provide the following information, for quotation<br />
Product Description:<br />
Material:<br />
Glass Filled: %<br />
Frame Retardant<br />
PP PE PS SB EVA ABS POM SAN PA6<br />
PMMA ASA CAB PBT PA66 PC PC/ABS PPS<br />
PET PES PPO PSU PEEK LCP PEI PVC S/H<br />
Per Product Weight:<br />
No. of Cavities:<br />
No.of Gates Per Product:<br />
Description of Gate Finish:<br />
Size of Product (L * W * H):<br />
Sprue-gate<br />
Extended Sprue-gate<br />
Ring-gate<br />
Point-gate<br />
Colour:<br />
Transparence<br />
Color or Material Change Necessary: Yes No<br />
Controller: Yes No<br />
Nozzle Length:<br />
Thickness of ’A’ Plate:<br />
Feed Bush<br />
R=<br />
Feed Bush Heater: Yes No<br />
<strong>Hot</strong> Half: Yes<br />
Insulation Plate:<br />
Yes<br />
Project Book: Chinese English<br />
Remarks:<br />
Drawing:<br />
www.heatlock.com