Solventless Thermal Range - Bluestar Silicones

SilcoleaSe ® release coatings 

Solventless 

Thermal Range 

Bluestar Silicones. Delivering Your Potential.

n North American Special Range 

of thermal solventless systems 

SilcoleaSe ® products 

Product reference Viscosity (mPas) Typical applications Features 

POLY 366 ~400 • Labels for high 

speed dispensing 

XL 326 ~25 • Labels 

• Tapes 

XL 328 ~25 • Labels 

• Tapes 

POLY 8560 ~350 • Labels 

• Tapes 


• Tapes 

• Hygiene 


• Tapes 

• Hygiene 


• Tapes 


• Tapes 

• Hygiene 

n Superior flat release over a broad range 

of stripping speeds 

n Good cure at high coating speeds 

n For reduction of Pt content 

n Excellent compromise of reactivity/anchorage 

n For reduction of Pt content 

n Excellent compromise of reactivity/anchorage 

n Wide range of release levels with addition 

of release modifiers 

n High reactivity 

n Good solution against aggressive hot melts 

n Excellent abrasion resistance 

n Low viscosity polymer 

n Low misting 


n Excellent coating performance at high speed 

n Optima concept designed for platinum reduction 

or faster cure 

n Medium high viscosity polymer 





n High abrasion resistance 

n Flat release profile 




n Excellent abrasion resistance 


or faster cure

n Global Optima Range of thermal solventless sys 

SilcoleaSe ® products - PolYMeRS 





• Tapes 


• Tapes 

• Hygiene 


• Tapes 


• Tapes 

• Hygiene 



• Graphics 

n Low viscosity polymer for high speed coating 

n Low misting, high reactivity & excellent coating 


n Low viscosity polymer for high speed coating 

n Low misting, high reactivity & excellent coating 

n Medium high viscosity polymer 



n Dynamic release profile 


n Low misting 

n Good reactivity 

n Excellent general purpose system with 

high abrasion resistance 


n Medium viscosity polymer for LTC 

or reduced Pt levels 

n Premium release forces 

n Excellent effect of RCA range for tighter release 

force 

n Very flat release profile for label applications 

n Excellent cure on all papers 

n Excellent performance in graphic applications 

n Low co-efficient of friction 

SilcoleaSe ® products - ReleaSe coNTRol aDDiTiVeS 


RCA 395 ~900 • Labels 

• Tapes 

RCA 396 ~1200 • Labels for high 


RCA 397 ~1600 • Labels 

• Tapes 

n For in-line and off-line applications 

n Fast cure & very low extractables 

n Low zipping with excellent aged release stability 

n High release efficiency against all adhesives 

n LTC performance for in-line and off-line 

applications 


n Very good release stability 

n -olefin free 

n LTC performance mainly for in-line applications 


n High efficiency with speciality PSA (Deep Freeze, 

Removable etc.) 

n -olefin free

tems 

SilcoleaSe ® products - cRoSSliNKeRS 

Product reference Viscosity (mPas) Pt range achievable Features 

XL 325 ~25 25-50ppm n Allows very low Pt content formulations 

n Excellent reactivity for high speed coating 

n Excellent reactivity for low temperature coating 

XL 327 ~25 25-50ppm n Allows very low Pt content formulations 

n Excellent compromise reactivity/anchorage 

XL 320 ~25 45-70ppm n LTC compromise with good anchorage 

XL 321 ~25 45-70ppm n Excellent compromise reactivity/anchorage 

SilcoleaSe ® products - caTalYSTS and aDDiTiVeS 

Product reference Viscosity (mPas) Pt content (ppm) Features 

CATA 12070 ~300 2000 n Standard Pt catalyst 

CATA 11091M ~300 3000 n Standard Pt catalyst 

CATA 340 ~1500 1100 n Reduces silicone mist up to speeds of 1600m/min 

n Pre-mix of latest generation MRA & Pt catalyst 

n Efficient with high RCA content 

MRA 385 ~1500 - n Reduces silicone mist up to speeds of 1600m/min 

n Concentrated formulation of latest generation MRA 

n Efficient with high RCA content 

n Global Range of thermal solventless 

systems – special performance products 

SilcoleaSe ® products - PolYMeRS 


11364 ~400 • Labels 

• Tapes 

• Hygiene 

8500 ~350 • Labels 

• Tapes 

• Hygiene 


• Tapes 

• Graphics 


• Tapes 

• Hygiene 


• Tapes 

• Hygiene 

n Excellent release against hot melts 

and aggressive adhesives 


n Excellent anchorage on film 

n Medium viscosity polymer 



n Long bath life 

n Very low co-efficient of friction 

n Optimised polymer for coating onto PET film 

n Possible to use without anchorage additive 


n Optimised polymer for coating onto PET film 

n Easy release - suitable for tackified adhesive

SilcoleaSe ® products - ReleaSe coNTRol aDDiTiVeS 



• Tapes 

RCA 12045 ~1200 • Labels 

• Tapes 


• Tapes 

SilcoleaSe ® products - cRoSSliNKeRS 

Product reference Viscosity (mPas) Pt range achievable Features 

n Mainly for off-line applications 

n High resin content 

n Low zipping 

n High release efficiency (particularly Vs acrylic 

adhesives) 

n For in-line and off-line applications 

n General Purpose modifier for most adhesive 

and label applications 


n Mainly for in-line applications 

n Effective at small addition levels Vs most 

permanent acrylic and HM adhesives 


XL 96A ~25 50-100 ppm n Homopolymer SiH crosslinker 

n Excellent abrasion resistance on wide range 

of substrates 

n Low release interaction potential 

XL 323 ~25 50-100ppm n Optimised anchorage for difficult substrates 

XL 324* -~10 45-70ppm n Homopolymer SiH crosslinker 

n Excellent compromise reactivity/anchorage 

n Low release interaction potential 

XL 12031 ~45 60-90ppm n Standard co-polymer crosslinker with fast cure 

n Good compromise of reactivity with acceptable 

abrasion resistance on most standard substrates 

SilcoleaSe ® products - aDDiTiVeS 


ADD 382 ~15 PET film coating n Additive for PET film coating 

n Improves long term anchorage in high humidity 

conditions 

n Improves anchorage Vs difficult adhesives 

ADD 386* - Low friction n Low friction additive, reduces blocking, reduces 

back side transfer and improves printability 

* Development Product (discuss availability 

with your technical or sales contact)

n Asian Special Range of thermal 

solventless systems 

SilcoleaSe ® products - cRoSSliNKeRS and aDDiTiVeS 


XL 310 ~50 • Coating on 

glassine paper 

XL 329 ~20 • Low coat weight 

with 5 roller coating 

head 

• Excellent anchorage 

on PEK 

For detailed commercial contacts please visit our website: 

www.bluestarsilicones.com 

The information contained in this document is given in good faith and based on Bluestar Silicones current knowledge. 

Bluestar Silicones makes no representation or warranty as to the accuracy, completeness of such information or as 

to the compatibility of such information with the user’s intended application : information is supplied on an “as-is” basis 

and is not binding on Bluestar Silicones. Nothing contained herein is intended as a recommendation to use the products 

so as to infringe any patent. 

Bluestar Silicones assumes no liability for users’ violation of patent or other rights and disclaims any liability for loss, injury 

or damage which may result from the use of the products. Therefore, information contained herein must not be used as a 

substitute for necessary prior tests which are the sole responsibility of the user and which alone can ensure that a product 

is suitable for a given use. 

Bluestar Silicones France SAS 

21, avenue Georges Pompidou 

F-69486 Lyon Cedex 03 - France 

Tel : +33 (0)4 72 13 19 00 - Fax : +33 (0)4 72 13 19 88 

n Excellent cure at high coating line speeds 

with low Pt levels 

n Excellent low and stable aged release force 

when laminated with aggressive solvent base 

or hot melt adhesive 

n Excellent curing speed with low Pt levels; 

n Excellent anchorage on various substrates 

n Stable release force 

ADD 381 ~40 PET film coating n Long lasting anchorage on PET even 

in contact with aggressive adhesives 

n Long lasting anchorage on PET in high 

humidity conditions 

pemaco - Photos: Cover: © Tetra Images / GraphicObsession - PaulPaladin / Shutterstock. Inside: Yuriy Boyko - Andrjuss / Shutterstock 

SIL 11 001 3-2 Thermal

Solventless Thermal Range - Bluestar Silicones

Create successful ePaper yourself

Delete template?

Save as template?