NSG 9000-6G - Harmonic Inc

Chapter 4 Configuring Applications
VOD Application
5. Click Import.
4.2.4 Viewing VOD QAMs
The QAMs tab allows you to view the settings of all the QAMs configured to stream out VOD
sessions. These QAMs are managed by the following QAM managers:
• VOD SRM
• NGOD ERM
• ISA SRM
To view VOD QAMs
1. Select Applications > VOD > QAMs.
2. View the following read-only information:
QAM Manager - lists the defined QAM manager for this application. In VOD application,
the defined QAM manager can be VOD SRM, NGOD ERM, or ISA SRM. See
Configuring/Viewing QAM Channels on page 49.
GbE Port - the GbE port routed to this QAM-RF port. The value of this attribute depends
on the defined QAM mapping mode. See Defining Emulation/QAM Mapping Mode on
page 77.
GbE IP Address - the GbE IP address port that is routed to the QAM-RF port
UDP Port Range - the UDP port range that is routed to the QAM-RF
RF Output - see Configuring/Viewing QAM Channels on page 49
QAM Index - An index number to identify each QAM channel within the 144 available
QAM-RF channels of the device. This tab displays the available QAM channels as per the
number of QAMs Per Port value.
QAM Reference No. - (Read Only). This parameter indicates the QAM number of the
emulated device. This field appears when the device QAM Mapping mode is NSG 8108
bitmap or encoded and NSG 9116 bitmap or encoded.
TS ID - see Configuring/Viewing QAM Channels on page 49
NGOD Group Name - see Configuring/Viewing QAM Channels on page 49
© 2012 Harmonic Inc. 79 NSG 9000-6G, Version 2.7, Rev B