NSG 9000-6G - Harmonic Inc
NSG 9000-6G - Harmonic Inc NSG 9000-6G - Harmonic Inc
Chapter 3 Configuring Platform Parameters Firmware Upgrade To upgrade the firmware of more than one NSG 9000-6G device, use MCT. See MCT 9.6 and higher SW User Guide, or MCT Online Help. 3.2.1 Upgrading the Firmware of a Single NSG 9000-6G Device The NSG 9000-6G firmware is packaged and delivered within the installer application. The installer turns firmware upgrade into an easy and straightforward procedure. To upgrade using the NSG installer refer to the following instructions. You can still upgrade the firmware using Apache or the IIS HTTP server. For these instructions, refer to Firmware Upgrade Using an External Server on page 135. Before upgrading, prepare the following: • NSG installer - Obtain the installer from Harmonic's FTP site. The NSG installer includes the new firmware package. The name of the NSG installer indicates the device type and the firmware version. For example: NSG9K6G-2.6.4.3-1-Installer-v1.1.5.exe, where NSG9K6G device type 2.6.4.3-1 firmware version Installer v1.1.5 application name installer version • PC - Download the NSG installer to a computer that meets the following requirements: Access to the device. Port 22 of the computer should be open to allow communication via the SSH protocol. Around 200MB of free space Any kind of Windows operation system NOTE: Firmware upgrade is service affecting. To upgrade using the NSG installer 1. Once you downloaded the NSG installer to your PC, launch the NSG installer. The NSG installer. Double click the Installer exe file to launch it The NSG installer is extracting files. This may take around 30 seconds. The following dialog appears: The dialog indicates the firmware version packaged within the Installer you have started. © 2012 Harmonic Inc. 24 NSG 9000-6G, Version 2.7, Rev B
Chapter 3 Configuring Platform Parameters Firmware Upgrade View the firmware version and device type Enter IP address of the device Enter username Enter password Click to upgrade View the upgrade process By default Auto- Reboot is selected Click to view the log 2. In IP Address, enter the IP address of the device you wish to upgrade. 3. In UserName, enter the username for logging into the device. This username should be eligible to upgrade the firmware. See 2.2.1 Logging Into the Device via IE on page 15. 4. In Password, enter the required password. 5. By default, Auto-Reboot is selected. It allows to reboot the device once the installation of the new firmware is completed. 6. Click Install. The progress bar indicates that upgrade is taking place while denoting the current stage of the upgrade. View the upgrade process 7. View Log - during the upgrade, you can click View Log. A text file appears with detailed information regarding the upgrade. This log allows you to troubleshoot the upgrade process. © 2012 Harmonic Inc. 25 NSG 9000-6G, Version 2.7, Rev B
- Page 1 and 2: NSG 9000-6G Narrowcast Services Gat
- Page 3 and 4: Documentation Conventions This manu
- Page 5 and 6: Table of Contents 3.12.4 Configurin
- Page 7 and 8: Table of Contents Appendix D Contro
- Page 9 and 10: Chapter 1 Features and Specificatio
- Page 11 and 12: Chapter 1 Features and Specificatio
- Page 13 and 14: Chapter 2 Getting Started 2.1 Initi
- Page 15 and 16: Chapter 2 Getting Started Full Devi
- Page 17 and 18: Chapter 2 Getting Started Guideline
- Page 19 and 20: Chapter 2 Getting Started Guideline
- Page 21 and 22: Chapter 3 Configuring Platform Para
- Page 23: Chapter 3 Configuring Platform Para
- Page 27 and 28: Chapter 3 Configuring Platform Para
- Page 29 and 30: Chapter 3 Configuring Platform Para
- Page 31 and 32: Chapter 3 Configuring Platform Para
- Page 33 and 34: Chapter 3 Configuring Platform Para
- Page 35 and 36: Chapter 3 Configuring Platform Para
- Page 37 and 38: Chapter 3 Configuring Platform Para
- Page 39 and 40: Chapter 3 Configuring Platform Para
- Page 41 and 42: Chapter 3 Configuring Platform Para
- Page 43 and 44: Chapter 3 Configuring Platform Para
- Page 45 and 46: Chapter 3 Configuring Platform Para
- Page 47 and 48: Chapter 3 Configuring Platform Para
- Page 49 and 50: Chapter 3 Configuring Platform Para
- Page 51 and 52: Chapter 3 Configuring Platform Para
- Page 53 and 54: Chapter 3 Configuring Platform Para
- Page 55 and 56: Chapter 3 Configuring Platform Para
- Page 57 and 58: Chapter 3 Configuring Platform Para
- Page 59 and 60: Chapter 3 Configuring Platform Para
- Page 61 and 62: Chapter 3 Configuring Platform Para
- Page 63 and 64: Chapter 3 Configuring Platform Para
- Page 65 and 66: Chapter 3 Configuring Platform Para
- Page 67 and 68: Chapter 3 Configuring Platform Para
- Page 69 and 70: Chapter 3 Configuring Platform Para
- Page 71 and 72: Chapter 3 Configuring Platform Para
- Page 73 and 74: Chapter 3 Configuring Platform Para
Chapter 3 Configuring Platform Parameters<br />
Firmware Upgrade<br />
To upgrade the firmware of more than one <strong>NSG</strong> <strong>9000</strong>-<strong>6G</strong> device, use MCT. See MCT 9.6 and<br />
higher SW User Guide, or MCT Online Help.<br />
3.2.1 Upgrading the Firmware of a Single <strong>NSG</strong> <strong>9000</strong>-<strong>6G</strong> Device<br />
The <strong>NSG</strong> <strong>9000</strong>-<strong>6G</strong> firmware is packaged and delivered within the installer application. The<br />
installer turns firmware upgrade into an easy and straightforward procedure. To upgrade<br />
using the <strong>NSG</strong> installer refer to the following instructions. You can still upgrade the firmware<br />
using Apache or the IIS HTTP server. For these instructions, refer to Firmware Upgrade<br />
Using an External Server on page 135.<br />
Before upgrading, prepare the following:<br />
• <strong>NSG</strong> installer - Obtain the installer from <strong>Harmonic</strong>'s FTP site. The <strong>NSG</strong> installer includes<br />
the new firmware package. The name of the <strong>NSG</strong> installer indicates the device type and<br />
the firmware version. For example: <strong>NSG</strong>9K<strong>6G</strong>-2.6.4.3-1-Installer-v1.1.5.exe,<br />
where<br />
<strong>NSG</strong>9K<strong>6G</strong><br />
device type<br />
2.6.4.3-1 firmware version<br />
Installer<br />
v1.1.5<br />
application name<br />
installer version<br />
• PC - Download the <strong>NSG</strong> installer to a computer that meets the following requirements:<br />
<br />
<br />
<br />
Access to the device. Port 22 of the computer should be open to allow<br />
communication via the SSH protocol.<br />
Around 200MB of free space<br />
Any kind of Windows operation system<br />
NOTE: Firmware upgrade is service affecting.<br />
<br />
To upgrade using the <strong>NSG</strong> installer<br />
1. Once you downloaded the <strong>NSG</strong> installer to your PC, launch the <strong>NSG</strong> installer.<br />
The <strong>NSG</strong> installer. Double click the<br />
Installer exe file to launch it<br />
The <strong>NSG</strong> installer is extracting files. This may take around 30 seconds. The following<br />
dialog appears:<br />
The dialog indicates the firmware version packaged within the Installer you have started.<br />
© 2012 <strong>Harmonic</strong> <strong>Inc</strong>. 24 <strong>NSG</strong> <strong>9000</strong>-<strong>6G</strong>, Version 2.7, Rev B
Change language