NSG 9000-6G - Harmonic Inc

More documents

Recommendations

Info

Chapter 2 Getting Started Full Device Configuration To configure ETH2 port NOTE: If you are using the ETH2 port, you must configure its IP address on a different subnet than that of the Ethernet 1 port. Once you are in Config mode, do the following: 1. Navigate to the Network Config screen and click . 2. Click to open the Ethernet Port 2 screen. 3. Click . The ETH2 IP Address screen appears. 4. Click . The Edit IP Address screen appears. 5. Enter the required IP address and click . The program checks whether you entered a valid IP address and only then applies changes. The Edit Subnet Mask screen appears. 6. Enter the required subnet mask and click . The program checks whether the network group parameters are valid and only then applies the changes. The ETH2 IP Address screen appears. If invalid network parameters are entered, an error message appears. NOTE: You can re-configure the Ethernet ports using MCT or the Web client. MCT allows the configuration of a number of NSG devices and the Web client allows a remote individual configuration. For further information about the Control Panel, see B.1 Using the Control Panel on page 108. 2.2 Full Device Configuration The NSG 9000-6G web client allows a full configuration of the NSG 9000-6G device. It also allows the user to monitor the NSG 9000-6G's status, view its alarms (if present), and troubleshoot them. This manual describes and instructs you on how to configure and monitor the device via the web client. The web client is accessible through a web browser. The following web browsers are supported: Table 2-1: Supported Web Browsers Microsoft Internet Explorer Supported Versions Mozilla FireFox Supported Versions 7.0 3.6 and up 8.0 Compatibility view Using IE 8.0 To access the web client using IE8, you should use Compatibility View. This view allows to observe browser pages in a mode that is compatible with IE8. To set compatibility view 1. Open IE8. © 2012 Harmonic Inc. 14 NSG 9000-6G Version 2.7, Rev B
Chapter 2 Getting Started Full Device Configuration 2. Select Tools > Compatibility View Settings. 3. Check Display all websites in Compatibility View, or specify the IP address for specific sites. 4. Click Close. 2.2.1 Logging Into the Device via IE To log into the device via IE, open a browser and login by using the required user name and password. Each user is eligible to a different mode of work with the device. The following table lists the various users and their working mode: Table 2-2: Username and Working Mode Username Password Working Mode guest nsgguest Allows only to monitor the operation of the device. config nsgconfig Allows to configure the device and to define the Config and Guest access level password. admin nsgadmin Allows to configure the device, to define a password to all users and to export and import firewall tables. See page 35. The current access level appears in the title bar of the web client. Indication of the current username See also, 3.9 Device Authentication on page 34. To login the device 1. Open an IE browser. 2. Type in the address of the required device. © 2012 Harmonic Inc. 15 NSG 9000-6G Version 2.7, Rev B
Page 1 and 2: NSG 9000-6G Narrowcast Services Gat
Page 3 and 4: Documentation Conventions This manu
Page 5 and 6: Table of Contents 3.12.4 Configurin
Page 7 and 8: Table of Contents Appendix D Contro
Page 9 and 10: Chapter 1 Features and Specificatio
Page 11 and 12: Chapter 1 Features and Specificatio
Page 13: Chapter 2 Getting Started 2.1 Initi
Page 17 and 18: Chapter 2 Getting Started Guideline
Page 19 and 20: Chapter 2 Getting Started Guideline
Page 21 and 22: Chapter 3 Configuring Platform Para
Page 65 and 66:
Chapter 3 Configuring Platform Para
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Chapter 4 Configuring Applications
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Chapter 5 Conditional Access System
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Chapter 6 Monitoring and Troublesho
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Appendix A Firmware Upgrade Using a
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Appendix B Upgrade Server Installat
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Appendix C Standard ES Types and De
Page 149 and 150:
Appendix D Control Panel Using the
Page 151 and 152:
Appendix D Control Panel Using the
Page 153 and 154:
Appendix E EIA SDT and HRC Standard
Page 155 and 156:
Page 157 and 158:
Page 159:
Harmonic Inc. 4300 North First Stre
show all

NSG 9000-6G - Harmonic Inc

Create successful ePaper yourself

Delete template?

Save as template?