NSG 9000-6G - Harmonic Inc

Chapter 6 Monitoring and Troubleshooting
Generating and Viewing Logs
Date - the date the alarm was issued.
Time - the time the alarm was issued.
Module - the module that raised the alarm.
Description - a brief description of the alarm.
State - indicates whether the alarm is raised.
To refresh alarms log
Since the Alarms log displays the alarms up to the time you generated the log, refresh it to
view an updated log by performing the following:
• In the Alarms Log tab, once the alarms log is displayed, click Refresh Log.
The log is updated to display the latest alarms.
To clear the log
1. Select Monitoring > Logs > Alarms Log.
2. To clear the log, click Clear Log.
The currently displayed log disappears. Once you click View Log, a new log is generated.
It includes alarms registered since the last clear log.
To save log to file
1. Select Monitoring > Logs > Alarms Log.
2. To save the log, click Export.
3. Select a location for saving the file and click Save.
The log is saved as an XML file in the location of your choice.
6.5.2 Monitoring the GbE Ports
The Counters page monitors the operation of the GbE ports.
Each GbE port is monitored for the following events:
Table 6-3: GbE Port Monitored Events
Event
Transmitted Management
Packets
Received Management Packets
Description
The number of legal management packets
transmitted by the active GbE port.
The number of legal management packets received
by the active GbE port.
© 2012 Harmonic Inc. 127 NSG 9000-6G, Version 2.7, Rev B