NSG 9000-6G - Harmonic Inc

Chapter 6 Monitoring and Troubleshooting
Device Utilization
The following page opens. It shows the traffic flowing via RF port 1 of module 1 with
detailed information regarding service 5 of QAM-RF 1.1.1.:
Graph bar display of the
output traffic of the
selected QAM
Detailed information of
the selected service
NOTE: Currently, the Module Traffic page shows only eighteen services per channel.
You can view traffic also via the Input view and Output View pages.
1. Select Monitoring > Traffic > Input View/Output View.
2. To view updated information, click Refresh Output/Input Information.
3. View the following service related information:
NOTE: PIDs appear in Hex. and in decimal in the following pattern: Hex. (Decimal.)
Service ID - Read Only. The ID number of the service.
Port:IP - The number of the input port and its IP address.
UDP Port - The UDP according to the source configuration.
PMT Ver - The version of the PMT PID
PMT PID - The PID over which the service's Program Map Table (PMT) is transmitted.
PCR PID - The PID of the service's Program Clock Reference (PCR).
ECM PID - The PID of the Entitlement Control Message (ECM).
The following picture shows the Output view tab. It shows the traffic flowing via RF port 1
of module 1 with information regarding service 5 of QAM-RF 1.1.1:
Output module
Traffic flowing via
RF port 1
Information
regarding service ID
5
© 2012 Harmonic Inc. 111 NSG 9000-6G, Version 2.7, Rev B